Nicebox360

Nicebox360

CopyPasteStd
Kostenlos

Betriebssystem:
Sprache:

Beschreibung

You need a box for a specified dimension? No problem. The generator will create a box with the specified dimensions, which you can manufacture using laser cutting or milling.

 

Each method of production has its own characteristics:

- For laser cutting, the plugin takes into account the thickness of the cutting laser parameter (kerf)

- For milling, plug-in takes into account the diameter of the cutter (mill option) and creates the special lugs on the inner corners of the parts to the entry of cutters.

 

Using these settings, you can easily make the box available/accessible to you in the way you want. With proper parameters, the details will exactly fit to each other, and you do not need to use glue.

Hilfe lesen

Informationen zu dieser Version

Version 1.0.0, 24.07.2017
Initial release

Screenshots und Videos


Kundenbewertungen

(4 Bewertungen)

|

Technische Hilfe erhalten
  • Creates a "nice box" starting point.
    Richard Lawler | Februar 21, 2019 Geprüfter Download (Was ist das?)

    This add-in creates simple laserable boxes with a single tab (finger joint) per edge. 

    But it also creates sketches for each box side body. So you can modify the sketch and edit the extrusion feature in the timeline to make your box more complex. For example adding multiple finger joints to an edge.

    I will need to experiment, but this could end up being a good timesaver for creating the starting geometry for more complex laser-cuttable models. 


  • Almost works for my needs
    Chris Haskins | Februar 20, 2019 Geprüfter Download (Was ist das?)

    Fun add in, wanted to use it to make a G10 box for 18650s. If it had a toggle to set dementions to inside rather than outside it would be more useful for me. Takes to many tries to figure out what way its going to assemble and offset for the thickness of the material.


  • Nice But
    Dean Forbes | Oktober 17, 2018 Geprüfter Download (Was ist das?)

    I like it, I appreciate it is a hobby project done volunatarily 

    I appreciate the time and effort you have put in 

    however

    Broadly mark Evans comments resonate with me 

    I feel this should be core to the application it could be used by so many people 

     

     

     

     

     

     

     

     

     

     

     


  • Nice demo but ultimately not very useful
    Mark Evans | November 20, 2017 Geprüfter Download (Was ist das?)

    This is a nice demo of how things can be automated in F360 but in the end, the author quit too soon in development to make it useful for anything. I am impressed with the quality of the scripts. It will make a "box" every time you give it sensible numbers. Its downfall is that there are no provisions for a lid or controlling how many finger joints there are. Get it, use it, but expect to have to do a lot of work on your own to get a useful box.


    Timofei Korotkov (Herausgeber) | November 24, 2017

    Mark tnx for your review. You are right that right now that app similar to demo phase. It is my hobby project and unfortunately it is not always possible to give enough time to develop. In plans to give a control on box finger joints (but here I still could find good solution about sketch merging).

Nach oben