Bevel Gear Maker  (Advanced)

Bevel Gear Maker (Advanced)



The plugin creates bevel gears various set of parameters. Advanced version creates shafts from 10 to 179 degrees for straight teeth or from 60 to 120 degrees for spiral and zerol teeth. Parameters and description of functions are available in Guide.pdf. Information about invoices is available in Consulting Services section (please click More to expand the section).

Attached video shows how to use the plugin and set parameters.
Execution in most cases takes less than a minute on i7/8GB RAM/512GB SSD computer.

Plugin doesn't check interferences automatically and doesn't perform any analysis of prepared components. Please make sure that the necessary check is done before releasing this onto production. You must be aware that real dimensions of manufactured components may be different than in the design. Every material has different characteristics and its parameters may change during time depending on the kind of material, temperature and humidity of environment, workload, etc. Simplest motion analysis can be done by using joints and motion rules prepared by the plugin. Both involute and trochoid interferences can be checked by eyes but there’s better, dedicated built-in tool (TOOLS  Interference) available in Autodesk® Fusion 360™.

Acerca de esta versión

Versión 3.2.0, 13/04/2022
Fixed: * cannot set face width and cutter radius properly for default cases and small dimensions, * invalid paths handling on Mac computers Changed: * removed checking version

Capturas de pantalla y vídeos

Reseñas de clientes

4 reseñas
Obtener ayuda técnica
  • Pretty amazing, missing components
    Eric Huff | diciembre 17, 2020 Descarga verificada (¿Qué es esto?)

    A few short comings are there is no way to create a high pinion or low pinion gear set. Also, there is no way to drive the wheel or ring diameter to match it to a housing. 

  • Very good.
    Joshua Verbrugge | diciembre 15, 2020 Descarga verificada (¿Qué es esto?)

    Does exactly what it says on the tin. This is a very useful tool!

  • Super outils!!!
    François Montagnon | noviembre 18, 2020


    Super outils. Une prévisualisation très utile. La création automatique du positionnement des engrenages avec liaison de mouvements, très pratique !!! Super !


  • Thank you so much!
    Acland | octubre 21, 2020 Descarga verificada (¿Qué es esto?)

    This is the third shwivel plugin I've bought, and the third shwivel plugin that's turned out to be exactly what I needed. Thank you for the fine work!

Ir arriba