Spur Gear Creator

Spur Gear Creator

Graham Chow
Pagado, Versión de prueba gratuita de 30 días de duración

SO:
Idioma:

Descripción

The features of this gear creator are:

1) You can design a gear that uses a single largest bit to the machine.

2) It can create a pocket so you can easily machine the other side of the gear.

3) It uses the undercut to define the fillet. You can also specify an ellipse for the fillet to give an unusual looking gear.

Lea el documento de ayuda

Acerca de esta versión

Versión 1.101, 20/10/2020
Support toolbar. Added in "Spline Point Scale" so you can adjust the number of points of the involute spline at a performance cost. Support spur gear sketch so you can use it for laser cutting. Improved performance on mac os.

Directiva de privacidad del editor

Capturas de pantalla y vídeos


Reseñas de clientes

(14 reseñas)

|

Obtener ayuda técnica
  • Is this one still able now?
    乔 治 | septiembre 03, 2020 Descarga verificada (¿Qué es esto?)

    Even the system told me it is loaded, but I can't find where to start it? Where is it? Is it expired?


    Thomas Hohlfeld | septiembre 10, 2020

    i found it: construction --> tools --> module


  • Some thing odd happening with lager number of tooth
    Daniel Schmidt | febrero 27, 2018 Descarga verificada (¿Qué es esto?)

    Hi Patrick, i observe a strange behavior when increasing the number of tooth (i leave all settings as default, but change the teeth number) starting with 3 is normal, passing the 40 tooth the tooth kind of overlap. Also when selecting the contour for CNC milling: the smaller gears work find. The larger gears you have to select edge by edge. thanks for your help Daniel


  • Sketch Missing
    Patrick Edwards | febrero 02, 2018 Descarga verificada (¿Qué es esto?)

    Initial sketch missing from the gear profile


    graham chow (Editor) | febrero 05, 2018

    Hi Patrick, this is as designed. Maybe in a future release, it can be supported.


  • Decu
    Patrick Vanquelef | enero 12, 2018 Descarga verificada (¿Qué es esto?)

    J'ai le même problème que Carsten Müller . Cela ne fonctionne pas correctement et plein d'extrusion en jaune dans le timeline. Merci de votre réponse


  • Great!
    Patrick Pronovost | julio 18, 2017

    i needed to make a replacement gear for a RC toy and it was a snap to make with this I am more then happy buying it knowing it works and will be useful when I need it next.


  • OD locked up in the menu.
    Jocelyn Sicotte | mayo 28, 2017

    You cannot make a gear of a specified OD outside diameter. The OD is fixed based on the parameters you insert. NOT nice.


    Angus Young | enero 11, 2018

    Outer diameter is determined by several variables, it's not stated explicitly when designing a gear. I would suggest you watch this video. https://www.youtube.com/watch?v=ZakT54JIhB8


  • I'm Sure It's Great But,
    Colton Tshudy | mayo 05, 2017

    I'm not able to use this addon because C++ Add-Ins don't work for some reason. If anyone knows a fix please drop a reply.


  • good add-on, would be amazing if...
    Brian Greeson | febrero 03, 2017 Descarga verificada (¿Qué es esto?)

    Thank you for creating this add-on, very useful. Having the ability to select a standard profile (GT2, GT3, MXL, etc.) would make this awesome for creating pulleys too.


  • Small improvement
    Joe Dohm | noviembre 14, 2016

    It would be great if a note was made of the settings used to create a gear


  • Great App
    Raymond Yuhasz | julio 08, 2016 Descarga verificada (¿Qué es esto?)

    Hi Graham, I love the app, very helpful. Is there a possibility to add an internal gear option....such as the ring gear in a planetary gear set? Thanks!


    Alexander Wigen | octubre 26, 2016

    Yes please add the ability to make internal gears!


  • align Gears
    Isak Thjellesen | junio 10, 2016

    Would it be possible for you to add contact point circle. It would be extremely useful to align the Gears up.


    graham chow (Editor) | junio 11, 2016

    yes, will do in the next update


  • Nice tool but
    Carsten Müller | mayo 20, 2016

    it removes the sketches leaving a bunch of yellow extrudes in the time line.


    graham chow (Editor) | mayo 26, 2016

    I see the issue. I should be able to fix it up in an update.


  • Great For Quick Laser Cutting and Rapid Prototyping
    Ashley Hartwell | abril 30, 2016

    Program is really simply to use, one must simply specify pitch, pressure angle, and and teeth number and Fusion 360 does the rest. I do wish there was a toggle feature for english unit gears


    graham chow (Editor) | mayo 02, 2016

    It does use the units that you specify in the browser part of the document - section 5 (http://fusion360.autodesk.com/learning/learning.html?guid=GUID-E647CA56-7187-406A-ACE4-EAC59914FAE4). However you would need to reopen the add in.


  • Good
    Mike Geyer | abril 28, 2016

    Good

Ir arriba