Custom Screw Creator

Custom Screw Creator

Fabian Schurig



You can define your customized screw with the following Parameters:

Screw Name: Name of the Body

Head Diameter: Diameter of the cylinder head

Body Diameter: Diameter of the body shaft

Head Height: Height of the cylinder head

Body Length: length of the body shaft

Hexagon Diameter: Diameter of the inner Circle of the hexagonal polygon

Hexagon Height: Height to cut the hexagon from the cylinder head

Fillet Radius: Radius of all fillets

Thread Length: length of the thread

Chamfer Distance: distance of the 45degree chamfer on the body shaft


Or select preset values.


Lea el documento de ayuda

Acerca de esta versión

Versión v1.3.1, 04/08/2020
v1.3.1 - Fixes - Works with Fusion 360 Version 2.0.8624 (2020-07-25) v1.0 - initial MacOS version

Capturas de pantalla y vídeos

Reseñas de clientes

(18 reseñas)


Obtener ayuda técnica
  • does not add value to 360
    Art Lieberman | febrero 13, 2021 Descarga verificada (¿Qué es esto?)

    It's easy enough to create a bolt by creating a cylinder and then apply a thread to it.

    What I really want is to be able to declare threads-per-inch.

  • Need more customization options
    Ethan | octubre 13, 2020 Descarga verificada (¿Qué es esto?)

    Would it be possible to add options to customize the screw (ie. pitch, thread angle, minor diameter)? Currently it seems we can only set the screw's height, width and the size of the head.

    Thank you!

  • Looks good but won't open in Fusion 360?
    Samuel Husband | junio 26, 2020 Descarga verificada (¿Qué es esto?)

    I have downloaded it but it won't load when i select it in Fusion 360? 

    Art Lieberman | febrero 13, 2021

    (1) exit from Fusion 360 (2) install the .msi file that you downloaded (double-click it) (3) start Fusion 360 (4) type the letter "S", which brings up the shortcut menu (5) type "create screw"

  • Unable to start plug-in
    Michael Smolek | junio 02, 2020 Descarga verificada (¿Qué es esto?)

    It is listed in the Plug-Ins drop-down menu, but nothing happens when the run button is enabled. Also, there is no start button listed under the Insert or Create menus. Enabling run at startup seems to do nothing.

    Sascha B. | junio 11, 2020

    same here, I am installing the Plug, find it and press run. But nothing happen

  • I have installed successfully, but can not run
    肖 军 | mayo 26, 2020 Descarga verificada (¿Qué es esto?)

    I am using the education version, is it missing the relevant documents?

  • The plugin does not start
    Alexander Afeldt | mayo 21, 2020 Descarga verificada (¿Qué es esto?)

    После установки плагин появляется в диспетчере плагинов, но он не запускается и меню для вставки болтов не появляется.

  • still cant define a size of thread
    Paul Elliott | enero 24, 2020 Descarga verificada (¿Qué es esto?)

    hi am i missing something as looking at the plugin you can still only pick a define thread from the section IE 10mm 4mm 6mm i need to make a thread that is 19mm so being able to put that value in or select it would help more thanks 

    David Segal | febrero 01, 2021

    Hello Paul, did you ever solve this? I need 19mm too. I wonder why it is not a standard thread in Fusion, when most switches I find on the market are 16mm or 19mm? Thank you

  • Does not run...
    Dany Syrbu | enero 24, 2020 Descarga verificada (¿Qué es esto?)

    Hi, I read that the plugin has beed updated, but, I still can't run it.

    There is updated version here, but it still does not run, could u help me?

  • Addon will not run after 2019 September update
    Aaron Kagarice | diciembre 18, 2019 Descarga verificada (¿Qué es esto?)

    Mathias Kern | enero 23, 2020

    Same here. Would be nice to use it but it looks like it is not. @Support Any help?

    Fabian Schurig (Editor) | enero 23, 2020

    Hello Aaron and Mathias Thanks for the review. I did an update and it was already sent in for submission on 05-01-2020. Currently the status is pending and I am waiting for Autodesk to finally publish it. Since this process seems to be outsourced to India on the Autodesk end it is a tedious process. You can get the latest version on GitHub Thanks in advance! Best Fabian

  • Sehr hilfreich
    Sebastian Sichelschmidt | octubre 20, 2019 Descarga verificada (¿Qué es esto?)

    ( ͡° ͜ʖ ͡°)

  • Nice
    Eva Vedel | agosto 08, 2019 Descarga verificada (¿Qué es esto?)

    Thank you !

  • Gracias
    Neaitinse Neaitinse | marzo 09, 2019 Descarga verificada (¿Qué es esto?)

    :D Muchas gracias.

  • Kruto!
    Artem Pylaev | enero 24, 2019

    Please, make it for macos

  • nice,but would be better with more features
    Jones | julio 22, 2018 Descarga verificada (¿Qué es esto?)

    I would like to sugest adding in American Standard thread sizes.  it would also be nice to chane the cap to philips head. and an option to model the threads on the compnent.

  • Thanks
    Sergey Bob | julio 22, 2018

    Great creator ! Thanks !!!

  • nice
    Zoltán Tolmács | enero 31, 2018 Descarga verificada (¿Qué es esto?)

    Good job! Is there any way to delete the center screw before the others are created? If I have material in the center, it cuts the first screw into my design.

    Fabian Schurig (Editor) | agosto 01, 2018

    Thanks for your comment! First screw now gets hidden.

  • Perfect
    Christophe Pochari | noviembre 24, 2017 Descarga verificada (¿Qué es esto?)

    Great plug in

  • Hilfreiche App
    André Pereira | noviembre 10, 2016 Descarga verificada (¿Qué es esto?)

    Die App ist einfach strukturiert und kann leicht bedient werden. Achtung: keine Parameter per maus ändern, da sonst massenweise Fehlermeldung kommen!

    Fabian Schurig (Editor) | agosto 01, 2018

    Vielen Dank für den Hinweis. Mit dem neuen Update sollten fast alle Fehler behoben sein.

Ir arriba