Sistema operativo:


AnyShortcut is an Autodesk® Fusion 360® add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360 commands that cannot easily be captured and run without some extra tweaking (e.g. Look At Sketch).


If you get any problems, please check out the section on Known Issues.

Informazioni sulla versione

Versione 1.1.2, 05/02/2024
* Fix selecCmd error for Look At commands. #12

Schermate e video

Recensioni dei clienti

19 recensioni
Richiedi assistenza tecnica
  • Fusion needs this
    Josef Karlsson | maggio 07, 2024 Download verificato (Guida rapida)

    Bit slow but I'm guessing that might just be due to it being an add-in rather than implemented by Autodesk as it should have been a decade ago.

  • Perfect for Solidworks to Fusion 360.
    Tristan Schutte | gennaio 09, 2024 Download verificato (Guida rapida)

    Going from Solidworks where you can make a shortcut from anything, even your pet cat, to Fusion 360 limiting what you can do, this Add-In is exactly what I have been missing!

  • Redo SHortcut possible ?
    Leon Mesla | luglio 26, 2023 Download verificato (Guida rapida)


    Is it possible to add a shortcut to the redo option (ctrl+Y) with the help of your addin ? Or if you know any other solution ? Thank tou for your great Addin that help me a lot with my workflow !


    Thomas A (Autore) | gennaio 16, 2024

    I think redo is already Ctrl+Y (Can be inspected using the Toolbar & Shortcuts editor add-in)? The add-in does have a Repeat Last Command menu option that you can assign a shortcut to.

  • What a time saver
    Alexander Wendt | aprile 03, 2023 Download verificato (Guida rapida)

    Thank you so much, such a great tool to improve my workflow!

  • Perfect addon for keyboard shortcuts
    Alex Winter | agosto 23, 2022 Download verificato (Guida rapida)

    Works Perfect for grounding & ungrounding components.  It is so much quicker now that I can have a shortcut to do this.  I do this on everypart probably atleast 8 times.

  • Essential
    Hamidreza Shirinkami | dicembre 03, 2021 Download verificato (Guida rapida)

    Fusion 360 is really lacking good shortcuts. This addon is the best remedy. Well, for me it's essential to the point that it's the next thing I install after Fusion itself. I have just one feedback; as far as I've tried "Go Home" command is not recorded. Is it a limitation by Fusion?

    Richard Corp | dicembre 23, 2021

    Absolutely it is, Ive tried forever to try and get it. If you check out the github page you will find a similar question to yours under the 'issues' tab and a workaround.

    Axa lea | settembre 15, 2023

    I'm working on two add-ins related to this: Extra Shortcuts provides new commands that can have a shortcut set. It does not have a recording functionality. Instead, more commands can be found by using the add-in Toolbar & Shortcuts Editor. Go Home is included! More info: Note: Contrary to to AnyShortcuts, these add-ins will not be free.

  • Thanks
    mac ito | novembre 30, 2021 Download verificato (Guida rapida)

    Thanks a lot

  • Thx !
    Offi Offline | novembre 10, 2021 Download verificato (Guida rapida)

    Having keys for timeline commands is very nice. Also a home view command would be super nice.

  • Doing what autodesk won't
    Anthony Welton | ottobre 01, 2021 Download verificato (Guida rapida)


  • Must have..
    Mark Lewno | settembre 03, 2021 Download verificato (Guida rapida)

    Apparently what I think are invaluable tools that I use all the time differs from Autodesks opinion, but this cures that.  Being able to assign shortcuts to anything is invaluable.

  • Perfect!
    Bruno Gv | giugno 26, 2021 Download verificato (Guida rapida)


  • Works Great, Improved Efficiency!
    Tanner Ellison | giugno 23, 2021 Download verificato (Guida rapida)

    This AddIn is awesome! It works as advertised and has greatly increased my efficiency in constructing  models and blueprints. 

  • Incredibly usefull addon!
    Antony A | maggio 25, 2021 Download verificato (Guida rapida)

    With this addon we can assign/change hotkeys for most(not all) important operations such as:views, isolate/unisolate, prev./next step etc.

    Thank you Thomas for this!

    It would be great, if we also could assign a hotkey for such tings as:

    1.Hiding/unhiding sketches/analysys/canvases etc.

    2.Selection filters combinations

  • Awesome!
    Technofrikus TF | maggio 19, 2021 Download verificato (Guida rapida)

    Finish Sketch has a shortcut now, so nice! Thanks a lot!

  • Thank You
    Charlie Riley | aprile 22, 2021 Download verificato (Guida rapida)

    Now I can shortcut Pan & Orbit. Because I have a stylus mouse there's no middle button as such only a scroll wheel, now it's so much easier  :)

  • omg!
    Christopher H. | febbraio 07, 2021 Download verificato (Guida rapida)

    Finally a way to snap to specific views by command:) But do you know why it takes up to or maybe a bit more than 1s to execute those commands? I click the left view for example and it takes some "time" to get there.

    Thomas A (Autore) | luglio 17, 2021

    For the rotation, I use commands provided by Fusion 360 and they force the animation. I have been looking into more "manual" moving of the camera in the code to make the move instant, but I've hit some snags on the "Look At" functionality. Can't say when I get around to finish the implementation.

  • A Must Have
    Tim Mecking | gennaio 24, 2021 Download verificato (Guida rapida)

    Finally I can assign a shortcut to Zoom Window!


    Thank you so much.

  • Great!
    Vytautas Vizbaras | dicembre 29, 2020 Download verificato (Guida rapida)

    is real nice

  • Good work
    Andrii Duchko | dicembre 12, 2020 Download verificato (Guida rapida)

    Nice, thank you! Is it possible in the next version to add all the ViewCube arrows as well? It would be very convenient.

    Jussi Punamäki | maggio 16, 2022

    This is the feature I've been also looking for. Would be awesome if possible.

    Axa lea | settembre 15, 2023

    I'm working on new add-ins related to this: Extra Shortcuts provides new commands that can have a shortcut set. It includes commands to rotate and roll the model - is that what you are looking for? More info: Note: Contrary to to AnyShortcuts, these add-ins will not be free.

Vai all'inizio