AnyShortcut
無料
OS:
言語:
説明
AnyShortcut is an Autodesk® Fusion 360® add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360 commands that cannot easily be captured and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Known Issues.
This plugin is absolutely fantastic! It would be even more perfect if it could support shortcuts for saving camera angles—especially multiple camera angle presets.
As blender user i used "/" shortcut for Hide/Unhide. With your addon i use "/" "." - for Isolate/Unisolate. Why fusion still don't understand, that Shortcut is gamechanger....
They need to look at Blender.
Thanks for plugin bro.... And make it paid and refine it. People will pay for it. 20$ - as easy...
I'm testing your plugin for Fusion:
AnyShortcut
How can I add a shortcut for the commands:
Activate Root Component
Toggle Isolate/Unisolate
Edit Timeline feature
Thanks
Hi, only separate Isolate and Unisolate are possible. Activate root component is not possible. These features are available in the commercial Axalea Extra Shortcuts add-in. Edit feature seems to be a separate command for each feature, so they would need to be combined into one. It is not supported by the add-in. It could maybe be implemented in the add-in, but would require a big look-up table for every type of feature possible.
AnyShortcut is everything I wished for and more! You’d think Fusion 360 would have this feature built in by now, but no. This add-in has made my life so much easier and working in Fusion so much more enjoyable. As someone who’s always been a keyboard shortcut enthusiast, this is hands down the best add-in I could ask for. Huge thanks to the developer—this is a total game-changer!
I was looking for an add-in so I could at least use keyboard shortcuts to go to common views, and move around in the timeline. This does exactly that as built-in functions to assign shortcuts to, plus the option to record an action and create a macro for that which can then be assigned. I haven't used that feature yet but I imagine as I get deeper into Fusion, I will. Not sure what people are saying about it giving it low stars, ok there maybe is no documentation but I would assume people using an add-in in Fusion would be tech savvy enough to navigate this... When enabled, it is in the utilities toolbar... and assigning a hotkey is the same as it is for any tool in fusion from there.
The toolbar/panel icon shown in the screenshot does not appear for me, so I can't activate any of AnyShortcuts' functionality.
I've verified AnyShortcut is running via the "Scripts and Add-Ins" menu. I've tried restarting it, tried restarting Fusion, but nothing works.
I'm using Fusion 2.0.20476 on Mac and latest AnyShortcut (1.1.2).
you have to click on the Utilities tab, hope this help.
All i want to do is make Ctrl + H take me to the home isometric view that you get by clicking the little house but I can't figure out how to do that and can't find any instructions on creating my own shortcut anywhere.
There are some instructions under Read Help Document on this page ( which points to https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=156700835167123223&;appLang=en&os=Win64 ). The basic idea is that you "record" the Fusion commands and then get the possibility to assign shortcuts to them. If I remember correctly, "Home" is a bit tricky/not possible to record. The commercial Axalea Extra Shortcuts add-in has "Go Home" built in (Windows only): https://apps.autodesk.com/FUSION/en/Detail/Index?id=8938612631131604049&;appLang=en&os=Win64&mode=preview
Bit slow but I'm guessing that might just be due to it being an add-in rather than implemented by Autodesk as it should have been a decade ago.
Going from Solidworks where you can make a shortcut from anything, even your pet cat, to Fusion 360 limiting what you can do, this Add-In is exactly what I have been missing!
Is it possible to add a shortcut to the redo option (ctrl+Y) with the help of your addin ? Or if you know any other solution ? Thank tou for your great Addin that help me a lot with my workflow !
MM
I think redo is already Ctrl+Y (Can be inspected using the Toolbar & Shortcuts editor add-in)? The add-in does have a Repeat Last Command menu option that you can assign a shortcut to.
Thank you so much, such a great tool to improve my workflow!
Works Perfect for grounding & ungrounding components. It is so much quicker now that I can have a shortcut to do this. I do this on everypart probably atleast 8 times.
Fusion 360 is really lacking good shortcuts. This addon is the best remedy. Well, for me it's essential to the point that it's the next thing I install after Fusion itself. I have just one feedback; as far as I've tried "Go Home" command is not recorded. Is it a limitation by Fusion?
Absolutely it is, Ive tried forever to try and get it. If you check out the github page you will find a similar question to yours under the 'issues' tab and a workaround.
I'm working on two add-ins related to this: Extra Shortcuts provides new commands that can have a shortcut set. It does not have a recording functionality. Instead, more commands can be found by using the add-in Toolbar & Shortcuts Editor. Go Home is included! More info: https://forums.autodesk.com/t5/fusion-360-design-validate/new-add-ins-for-windows-toolbar-amp-shortcuts-editor-and-extra/m-p/12229008 Note: Contrary to to AnyShortcuts, these add-ins will not be free.
Thanks a lot
Having keys for timeline commands is very nice. Also a home view command would be super nice.
Thanks!
Apparently what I think are invaluable tools that I use all the time differs from Autodesks opinion, but this cures that. Being able to assign shortcuts to anything is invaluable.
Thanks!!!!
This AddIn is awesome! It works as advertised and has greatly increased my efficiency in constructing models and blueprints.
With this addon we can assign/change hotkeys for most(not all) important operations such as:views, isolate/unisolate, prev./next step etc.
Thank you Thomas for this!
It would be great, if we also could assign a hotkey for such tings as:
1.Hiding/unhiding sketches/analysys/canvases etc.
2.Selection filters combinations
Finish Sketch has a shortcut now, so nice! Thanks a lot!
Now I can shortcut Pan & Orbit. Because I have a stylus mouse there's no middle button as such only a scroll wheel, now it's so much easier :)
Finally a way to snap to specific views by command:) But do you know why it takes up to or maybe a bit more than 1s to execute those commands? I click the left view for example and it takes some "time" to get there.
For the rotation, I use commands provided by Fusion 360 and they force the animation. I have been looking into more "manual" moving of the camera in the code to make the move instant, but I've hit some snags on the "Look At" functionality. Can't say when I get around to finish the implementation.
Finally I can assign a shortcut to Zoom Window!
Thank you so much.
is real nice
Nice, thank you! Is it possible in the next version to add all the ViewCube arrows as well? It would be very convenient.
This is the feature I've been also looking for. Would be awesome if possible.
I'm working on new add-ins related to this: Extra Shortcuts provides new commands that can have a shortcut set. It includes commands to rotate and roll the model - is that what you are looking for? More info: https://forums.autodesk.com/t5/fusion-360-design-validate/new-add-ins-for-windows-toolbar-amp-shortcuts-editor-and-extra/m-p/12229008 Note: Contrary to to AnyShortcuts, these add-ins will not be free.