Airfoil Sketch from File

Airfoil Sketch from File

無料
OS:
言語:

説明

Very simple to use, an existing construction line on a sketch need to be selected, then the file from which to generate the airfoil is selected. You can choose to have the airfoil name added as text on the sketch.

Features:

  • Use an existing sketch line as a chord reference for the profile. Can be of any length, at any angle with horizontal.
  • Accept CSV files, with either comma or semi-colon as a delimiter.
  • Accept DAT files, either in the Selig format or the less common Lednicer format
  • For Dat files, the name of the Airfoil can be added to the sketch, if desired.
  • Leading edge is always where the line started to be drawn.

このバージョンについて

バージョン 1.2, 2024/09/19
File dialog bug fixed, inverted profile fixed when line drawn from right to left, file dialog open on the existing profils directory.

スクリーンショットとビデオ


カスタマ レビュー

32 件のレビュー
テクニカル ヘルプを表示
  • Solution to: "cannot access local variable 'filename' where it is not associated with a value"
    João Peterson Scheffer | 7月 13, 2024 確認済みダウンロード (これは何ですか?)

    The Addin is pretty great, simple and easy to use but the developer doesn't seen to be a professional developer as simple bug was left in the code. Still, pretty good work!

     

    The fix is pretty simple for users and for the developer. Go to: "C:\Users\YOURUSER\AppData\Roaming\Autodesk\ApplicationPlugins\AirfoilSketchFromFile.bundle\Contents\AirfoilSketchFromFile.py".

     

    Open the file in a text editor, and then edit the file by simply erasing line 175, an 'else' statement and removing one tab form the 3 lines below it.

     

    The code before loks like this:

     

     if originSP.x > originEP.x:                
                    translationMatrix.translation = endPoint.asVector()
                else:                                
                    filename = dlg.filename
                    extension = os.path.splitext(filename)[1][1:]
                    csv = extension.casefold() == 'csv'

     

    And after:

     

                if originSP.x > originEP.x:                
                    translationMatrix.translation = endPoint.asVector()
                    
                filename = dlg.filename
                extension = os.path.splitext(filename)[1][1:]
                csv = extension.casefold() == 'csv'


  • stopped working
    Maciej Piasecki | 4月 02, 2024 確認済みダウンロード (これは何ですか?)

    Used it for a long time and it was ok. lately it stopped working.

    I get the notification:

    Failed:

    Traceback (most recent call last):

    File "C:/Users/macie/AppData/Roaming/Autodesk/ApplicationPlugins/AirfoilSketchFromFile.bundle/Contents/AirfoilSketchFromFile.py", line 180, in notify

    with io.open(filename, 'rt', encoding='utf-8-sig', errors='ignore') as f:

    ^^^^^^^^

     

    UnboundLocalError: cannot access local variable 'filename' where it is not associated with a value

     

    Hamza Sarıarslan | 5月 31, 2024

    I get it as well, such a shame it didn't work...

    Jakob Günther | 9月 23, 2024

    Try drawing the construction line form left to right or vice versa. (Only one direction works)

    eddie ringheim | 10月 18, 2024

    in the comments theres a dude named João Peterson Scheffer he made a comment how to fix that error find his comment and it says how to fix the problem


  • Perfect!
    Vladimir Makarov | 2月 27, 2024 確認済みダウンロード (これは何ですか?)

    Works great with Airfoil Tools!

    Gavit Gupta | 3月 19, 2024

    How? It is showing error again and again


  • Works 50% of the time.
    Kacper Pawlowski | 10月 20, 2023 確認済みダウンロード (これは何ですか?)

    Works 50% of the time. You never know when after constructing a complicated construction line, if the airfoil will actually produce or cause an error. I get the same error as the review below me.

    Traceback (most recent call last):

    File "C:/Users/rgtor/AppData/Roaming/Autodesk/ApplicationPlugins/AirfoilSketchFromFile.bundle/Contents/AirfoilSketchFromFile.py", line 180, in notify

    with io.open(filename, 'rt', encoding='utf-8-sig', errors='ignore') as f:

    ^^^^^^^^

    UnboundLocalError: cannot access local variable 'filename' where it is not associated with a value

     

    Gavit Gupta | 3月 19, 2024

    SAME! Found any solution to it?

    Kacper Pawlowski | 3月 20, 2024

    Unfortunately no, my workaround is to produce an airfoil whenever it works and then use the move/scale command to position it in place where I want.

    Jakob Günther | 9月 23, 2024

    Try drawing the construction line form left to right or vice versa. (Only one direction works)


  • Error when constrained construction line
    Rodrigo Torres | 10月 12, 2023 確認済みダウンロード (これは何ですか?)

    Failed:

     

    Traceback (most recent call last):

    File "C:/Users/rgtor/AppData/Roaming/Autodesk/ApplicationPlugins/AirfoilSketchFromFile.bundle/Contents/AirfoilSketchFromFile.py", line 180, in notify

    with io.open(filename, 'rt', encoding='utf-8-sig', errors='ignore') as f:

    ^^^^^^^^

    UnboundLocalError: cannot access local variable 'filename' where it is not associated with a value

    Gavit Gupta | 3月 19, 2024

    SAME! Found any solution to it?

    Lucas Chaudron Noury | 4月 30, 2024

    Hey, I hope I am not to late but, the dev is still active on is youtube and he speaks my native tongue therefore I have e-mailed him, and I will come back to this thread when I get an answer. Wish me luck ; ).

    Lucas Chaudron Noury | 5月 11, 2024

    Update: The dev is looking into it, hope this helped

    Jakob Günther | 9月 23, 2024

    @Gavit Gupta Try drawing the construction line form left to right or vice versa. (Only one direction works)


  • Why isn't it on Mac?
    Sebastian Cruz Noriega | 9月 23, 2023

    It would be really useful


  • It keeps crashing ...
    Dave Pinchbeck | 8月 15, 2023 確認済みダウンロード (これは何ですか?)

    I can install a single airfoil on a design, but when I go and try to ad a second it keeps giving me an error that really is of no help to me
    ***************

    Failed:

    Traceback (most recent call last):

    File "C:/Users/....../AppData/Roaming/Autodesk/ApplicationPlugins/AirfoilSketchFromFile.bundle/Contents/AirfoilSketchFromFile.py", line 180, in notify

    with io.open(filename, 'rt', encoding='utf-8-sig', errors='ignore') as f:

     

    UnboundLocalError: local variable 'filename' referenced before assignment

     

    ************
    I wish I could have this run on my Apple PC


  • Great Tool
    Sandip Dhillon | 10月 26, 2021 確認済みダウンロード (これは何ですか?)

    Using this tool significantly sped up my workflow. I am currently working on aerospace projects, and as a software engineer I appreciate a well-written tool. This tool does exactly what it says on the tin and in my experience it works without any bugs.


  • AirfoilSketchFromFile
    Jean Claude Meignant | 10月 11, 2021 確認済みダウンロード (これは何ですか?)

    introuvable de fusion une fois insteller jai fais plusieur fois la manip mais rien alors qu'il fontionner très bien avant la mise ajour des fusion


  • Profile Coordinate File Processing Errors
    Kirill Senukov | 9月 09, 2021 確認済みダウンロード (これは何ですか?)

    Failed:

    Traceback (most recent call last):

      File "C:/Users/User/AppData/Roaming/Autodesk/ApplicationPlugins/AirfoilSketchFromFile.bundle/Contents/AirfoilSketchFromFile.py", line 180, in notify

        with io.open(filename, 'rt', encoding='utf-8-sig', errors='ignore') as f:

    UnboundLocalError: local variable 'filename' referenced before assignment

    Gijsbertus den Butter | 1月 02, 2022

    I have the same issue

    Kale Macormic | 1月 08, 2022

    I am also having the same issue intermittently. Most of the time I get this same error, but a few times it worked as expected. It must be some edge case.

    宣道 河上 | 1月 20, 2022

    I have the same problem. Somtime it works but almost every time it fails with the message. I want to know the reason why.

    Kirill Senukov | 1月 30, 2022

    ..., "If the cook does not lie to us...," then such a message appears when the chord of the profile is indicated by the "usual" line. When I change a line to "construction," there is no such message.

    Joonas Hint | 3月 21, 2022

    It only accepts airfoils in left and right positions in sketch. You need to draw the line down the middle. If you draw from left to right you will get this.

    Petr Pozdnyakov | 12月 13, 2022

    Joonas Hint "It only accepts airfoils in left and right positions in sketch. You need to draw the line down the middle. If you draw from left to right you will get this." Thanks, your advice helped!

    Franz Leitner | 6月 23, 2023

    I have the same problem.


  • MERCI !
    ANDRE TRAN | 5月 01, 2021 確認済みダウンロード (これは何ですか?)

    MERCI !


  • YOU ARE A HERO !!!!!
    ozan deniz | 2月 18, 2021 確認済みダウンロード (これは何ですか?)

    I JUST HAVE TO SAY, THANK YOU. I tried so many ways, apps and finally found you. Thank God


  • When it works its invaluable!
    Rob Mcgeown | 2月 14, 2021 確認済みダウンロード (これは何ですか?)

    When it works this tool is invaluable! Unfortunately it frequently errors and once it does it seems impossible to get it working again.

     


  • Simple et efficace
    Mike Mike | 12月 02, 2020 確認済みダウンロード (これは何ですか?)

    Bonjour,

    Effectivement , l'application ne fonctionne plus et c'est vraiment dommage.

    C'est regretable qu'elle disparaisse avec la dernière mise à jour. Si utile pour travailler sur les profils et elle rendait un fier service.

    A souhaiter vivement que les développeurs puissent entendre notre SOS . . . .

    Bernard Marie Grosperrin (公開元) | 12月 03, 2020

    La mise en jour est maintenant disponible.


  • It worked before, but...
    Christof Eugster | 11月 24, 2020 確認済みダウンロード (これは何ですか?)

    This is a great tool, but it does not work with the latest Version of fusion360. I pay for my version of Fusion360 and it would be nice if it worked again...

    Bernard Marie Grosperrin (公開元) | 12月 03, 2020

    Update available now. It does work again.


  • Useful tool
    Marcin Spochacz | 11月 14, 2020 確認済みダウンロード (これは何ですか?)

    Creating airfoils in Fusion360 is a lot easier with it! Thank you

    Mike Mike | 12月 02, 2020

    I launch an S.O.S. to bring it back !!!!! Now, i hope i hope . . .


  • Please update
    Jon Smeberg | 11月 12, 2020 確認済みダウンロード (これは何ですか?)

    Looks to do exactly what i want it to but does not work. Please update so it works with the most recent version of fusion.

    Bernard Marie Grosperrin (公開元) | 12月 03, 2020

    Done, update available.


  • Bitte um Hilfe
    Holger Dorst | 11月 11, 2020 確認済みダウンロード (これは何ですか?)

    Seit dem letzten Update geht die App nicht mehr 

    Bernard Marie Grosperrin (公開元) | 12月 03, 2020

    Works again. Update.


  • No file popup after clicking ok
    Peter Mumford | 11月 03, 2020 確認済みダウンロード (これは何ですか?)

    This was working really well but now I don't get the pop up to select my .dat file after selecting the construction line and clicking on 'ok'

    The version of Fusion 360 I am running is 2.0.9305

    函宇 梅 | 11月 13, 2020

    I just find, I can't use it too, like yous

    ghis Pe | 11月 14, 2020

    Same problem with the version 2.0.9313

    Bernard Marie Grosperrin (公開元) | 12月 03, 2020

    fix available now.


  • Excellent App!
    José Alfredo Rosas | 10月 05, 2020 確認済みダウンロード (これは何ですか?)

    Thanks a lot, you have saved me a lot of time. great wrok!


  • Great
    CAUCHY Stephane | 6月 15, 2020 確認済みダウンロード (これは何ですか?)

    Très beau boulot. Un modéliste reconnaissant ;)


  • easy and effective
    Olivier Duval | 3月 03, 2020 確認済みダウンロード (これは何ですか?)

    many thanks for this App... Good work indeed... I have downloaded tre free tracfoil databank and linked it to the app... quick, easy, effective... 


  • Thanks
    sebastien baud | 2月 06, 2020 確認済みダウンロード (これは何ですか?)

    Merci beaucoup


  • Dimension and scaling problems
    Kjeld Mathias Petersen | 1月 14, 2020 確認済みダウンロード (これは何ですか?)

    There are some problems with loading data points that are beyond the dimension (-1;-1) to (1;1). I found that it was best to stay within these limits.


  • Great airfoil add-in for Fusion
    Jeff Thier | 2月 18, 2019 確認済みダウンロード (これは何ですか?)

    If you need to import airfoil data to your Fusion design, this is the tool to use!
    As intended, this add-in reads and imports any properly formatted airfoil DAT files as a spline to your sketch; Which is much more elegant and convenient than a series of lines segments.
    The second great thing is that, it scales and aligns the airfoil to the selected construction line during the import. Which means that the airfoil comes at the right dimension and with the right angle (provided you selected a properly dimensioned construction line).
    The only cons, is that as others mentionned, the airfoil is sometimes drawn inverted. (I guess it has something to do with the coordinates system when parsing). It takes no time to fix the sketch by mirroring the profile around the construction line. Maybe this can be fixed in a future version


  • Promising features, wish it would work with my .dats
    Harper Abbot | 2月 13, 2019 確認済みダウンロード (これは何ですか?)

    Generates a flawed spline (contains curvature errors, etc) and seems to have chosen only a few of the points contained in the airfoil .dat files.  The files work with the other Fusion airfoil plugin. 

    Bernard Marie Grosperrin (公開元) | 2月 22, 2019

    Could you give me a link where I could download your .dat files? Which one of the different standards are they following?


  • Very good tool
    Holger Weychardt | 2月 08, 2019 確認済みダウンロード (これは何ですか?)

    Simple and efficient. But same problem as Fabien. Sometimes the direction is not correct and I have no clue how to flip it.


  • Great tool
    Ziga Bozic | 2月 02, 2019 確認済みダウンロード (これは何ですか?)

    Works great, simple and efficient.

    Thanks!


  • Very useful, but I have this nasty bug with V1.0
    Fabien Gagné | 12月 30, 2018 確認済みダウンロード (これは何ですか?)

    We can't specify the direction of the airfoil. Sometimes it is right, other times the plugin is stubbornly stuck reversed, with the leading edge pointing aft :(

    Please add a checkbox option to reverse the direction.

    Here's a video that shows the bug https://youtu.be/DjMTnINHLK4" target="_blank">https://youtu.be/DjMTnINHLK4

    Bernard Marie Grosperrin (公開元) | 2月 22, 2019

    A simple miror will help, here.... Now, I agree it would be better if it was always consistent. Once I have some free time, I may look to make a version 2 with this corrected.


  • Very good job
    eric lemasson | 9月 23, 2018 確認済みダウンロード (これは何ですか?)

    Just work as promised. Needed to reinstall/repair it after F360 update...


  • Simple and great
    Greger Olofsson | 7月 22, 2018 確認済みダウンロード (これは何ですか?)

    This plugin does what it's supposed to and does it well!

    Trés bien!


  • Best airfoil addin for Fusion 360
    Bernard Marie Grosperrin | 6月 30, 2018

    Clearly, ability to draw an airfoil on an existing sketch, first selecting the cord, allow to make a very precise wing, with proper angles where needed. 

    A BIG plus!

先頭に移動