Spur Gear Creator
Платные, Бесплатная 30-дневная демоверсия
ОС:
Язык:

Описание

The features of this gear creator are:

1) You can design a gear that uses a single largest bit to the machine.

2) It can create a pocket so you can easily machine the other side of the gear.

3) It uses the undercut to define the fillet. You can also specify an ellipse for the fillet to give an unusual looking gear.

Сведения об этой версии

Версия 1.310, 19.09.2023
Updated to work with the latest version of Fusion 360 (2.0.16976) Signed Mac OS version. Improved performance. Fixed a corner case bug where it did not produce a profile.


Скриншоты и видео


Рецензии клиентов

14 оценки
Техническая поддержка
  • Is this one still able now?
    乔 治 | сентября 03, 2020 Проверенная загрузка (Что это такое?)

    Even the system told me it is loaded, but I can't find where to start it? Where is it? Is it expired?

    Thomas Hohlfeld | сентября 10, 2020

    i found it: construction --> tools --> module


  • Some thing odd happening with lager number of tooth
    Daniel Schmidt | февраля 27, 2018 Проверенная загрузка (Что это такое?)

    Hi Patrick, i observe a strange behavior when increasing the number of tooth (i leave all settings as default, but change the teeth number) starting with 3 is normal, passing the 40 tooth the tooth kind of overlap. Also when selecting the contour for CNC milling: the smaller gears work find. The larger gears you have to select edge by edge. thanks for your help Daniel

    Flavio Gioia | декабря 15, 2020

    I do have the same issue, did you find a solution?


  • Sketch Missing
    Patrick Edwards | февраля 02, 2018 Проверенная загрузка (Что это такое?)

    Initial sketch missing from the gear profile

    graham chow (Разработчик) | февраля 05, 2018

    Hi Patrick, this is as designed. Maybe in a future release, it can be supported.


  • Decu
    Patrick Vanquelef | января 12, 2018 Проверенная загрузка (Что это такое?)

    J'ai le même problème que Carsten Müller . Cela ne fonctionne pas correctement et plein d'extrusion en jaune dans le timeline. Merci de votre réponse


  • Great!
    Patrick Pronovost | июля 18, 2017

    i needed to make a replacement gear for a RC toy and it was a snap to make with this I am more then happy buying it knowing it works and will be useful when I need it next.


  • OD locked up in the menu.
    Jocelyn Sicotte | мая 28, 2017

    You cannot make a gear of a specified OD outside diameter. The OD is fixed based on the parameters you insert. NOT nice.

    Angus Young | января 11, 2018

    Outer diameter is determined by several variables, it's not stated explicitly when designing a gear. I would suggest you watch this video. https://www.youtube.com/watch?v=ZakT54JIhB8


  • I'm Sure It's Great But,
    Colton Tshudy | мая 05, 2017

    I'm not able to use this addon because C++ Add-Ins don't work for some reason. If anyone knows a fix please drop a reply.


  • good add-on, would be amazing if...
    Brian Greeson | февраля 03, 2017 Проверенная загрузка (Что это такое?)

    Thank you for creating this add-on, very useful. Having the ability to select a standard profile (GT2, GT3, MXL, etc.) would make this awesome for creating pulleys too.


  • Small improvement
    Joe Dohm | ноября 14, 2016

    It would be great if a note was made of the settings used to create a gear


  • Great App
    Raymond Yuhasz | июля 08, 2016 Проверенная загрузка (Что это такое?)

    Hi Graham, I love the app, very helpful. Is there a possibility to add an internal gear option....such as the ring gear in a planetary gear set? Thanks!

    Bo Petersen | августа 14, 2016

    +1

    Alexander Wigen | октября 26, 2016

    Yes please add the ability to make internal gears!


  • align Gears
    Ole Peterson | июня 10, 2016

    Would it be possible for you to add contact point circle. It would be extremely useful to align the Gears up.

    graham chow (Разработчик) | июня 11, 2016

    yes, will do in the next update


  • Nice tool but
    Carsten Müller | мая 20, 2016

    it removes the sketches leaving a bunch of yellow extrudes in the time line.

    graham chow (Разработчик) | мая 26, 2016

    I see the issue. I should be able to fix it up in an update.


  • Great For Quick Laser Cutting and Rapid Prototyping
    Ashley Hartwell | апреля 30, 2016

    Program is really simply to use, one must simply specify pitch, pressure angle, and and teeth number and Fusion 360 does the rest. I do wish there was a toggle feature for english unit gears

    graham chow (Разработчик) | мая 02, 2016

    It does use the units that you specify in the browser part of the document - section 5 (http://fusion360.autodesk.com/learning/learning.html?guid=GUID-E647CA56-7187-406A-ACE4-EAC59914FAE4). However you would need to reopen the add in.


  • Good
    Mike Geyer | апреля 28, 2016

    Good

Наверх