Bevel gears maker (Basic)

Bevel gears maker (Basic)

Shwivel
付费应用

操作系统:
语言:

描述

The application creates bevel gears for straight teeth and right shaft (90 deg) angle(*). The script automatically groups operation on the timeline for pinion and wheel.

 

Available features for this price option:

 

  • Module (mm),
  • Pressure angle (14.5, 17.5, 20, 22.5, 25 deg),
  • Clearance factor (0.188 or 0.25, clearance = module * factor),
  • Number of pinion teeth,
  • The backlash of a pinion (as arc length),
  • Radius factor of pinion root fillet (radius = factor * module),
  • Number of wheel teeth,
  • The backlash of the wheel (as arc length),
  • Radius factor of wheel root fillet (radius = factor * module),
  • Adding chamfers,
  • Width factor of chamfer (width = factor * module),
  • Height factor of chamfer (height = factor * module),
  • Button for saving parameters,
  • Button for loading parameters,
  • Showing progress.

 

Execution of the plugin for small (ex. z10/z30) takes less than a half minute on i7/8GB RAM/512GB SSD computer. For a larger number of teeth, especially for spiral(*) and zerol(*) it takes a few minutes. During the operation a progress bar with the current step is visible.

 

Disclaimer:

Please make sure that the load analysis is done on gears designed by this plugin in real machines before releasing it to production. An additional check is needed especially in case of undercuts:

  • section analysis,
  • interference analysis,
  • load analysis,
  • joints and motion simulation.

 

The program doesn't check interferences so additional checks in case of a low number of pinion teeth and low-pressure angles should be also performed.

If you want to manufacture and use gears designed by this plugin in real machines, remember that they can break during load and cause damages, severe injuries or death of people without tests.

 

(*)This is one of three "bevels makers" available in my shop. You can compare pricing plans and choose the best option for you by checking the list of features in other offers. If you bought a higher plan version than your old (ex. Basic -> Medium/Advanced), please send me an email with information about this and after correct verification of the payment history in PayPal, I'll return you the price difference.

读取帮助文档

关于此版本

版本 2.0.0, 2019/10/29
**Version 2.0.0 (2019-10-15)** Features: * module (mm), * pressure angle (14.5, 17.5, 20, 22.5, 25 deg), * clearance factor (0.188, 0.25, clearance = module * factor), * number of pinion teeth, * backlash of pinion (as arc length), * radius factor of pinion root fillet (radius = factor * module), * number of wheel teeth, * backlash of wheel (as arc length), * radius factor of wheel root fillet (radius = factor * module), * button for saving parameters, * button for loading parameters Changes: * only right shaft angle available (90 deg), * only straight teeth available, * adding chamfers is now disabled by default, * progress by showing steps has been changed to displaying API dialog with simple message and bar, * files' format has been changed to JSON (both error or saved parameters), * errors and last used parameters set are now placed in "Bevel_gears_maker_(bas)_settings" directory inside your Fusion 360 installation folder Fixes: * process of creating tooth has been changed so number of "geometry" and "modelling" errors has been significantly reduced (however, they can still occur especially when pressure angle value is high and fillet radius big; for workaround this, please try smaller fillet radius), * files paths will be working now both on Windows and Mac OS

屏幕截图和视频


客户评论

(0 评论)

|

获取技术帮助
回到页首