Nifty Dogbone for Autodesk® Fusion 360™

Nifty Dogbone for Autodesk® Fusion 360™

Ekins Solutions LLC

Digitally signed app

試用

作業系統:
語言:

說明

A fast and robust tool for adding dogbone fillets to the inside corners of a model. See the video below and the full product description at EkinsSolutions.com for complete information about what this add-in does and how to use it.

 

What you're installing is a fully functioning version of the add-in that will work for 30 days. After 30 days you must purchase a license to continue to use it. 

 

Note: This app uses a custom installer (and not the standard App Store installer).

閱讀說明文件

關於此版本

版本 1.3.0, 2020/11/17
1. Fixed a problem where the small icon in the “Update Dogbones” command was too large. 2. Fixed a problem where an error would appear when right-clicking on a Setup in the Manufacturing workspace. 3. Enhanced how dogbones are calculated for acute angles. The cutout on the left shows the corner without a dogbone. The cutout in the middle shows the dogbone that was created with the previous version of Nifty Dogbone. It created geometry that was unreachable. Additional material is now removed to make the corner accessible by the tool.

螢幕快照和視訊


客戶評論

(3 評論)

|

取得技術說明
  • That's fantastic
    Jonathan Gunning | 十月 29, 2019 驗證下載 (這是什麼?)

    Autodesk should do a deal with you and roll this into the base f360 package. Huge time and tedium saver.


  • Works Perfectly!
    Saleem Banatwala | 四月 29, 2019 驗證下載 (這是什麼?)

    This is exactly what I needed for my project!


  • Realy Cool!
    Sascha Kling | 四月 24, 2019 驗證下載 (這是什麼?)

    , i love it !!! Thank you very much !!!

移至頂端