threadModeler

threadModeler

coolOrange s.r.l.

Digitally signed app

Zdarma

Operační systém:
Jazyk:

Popis

The threadModeler tool has been developed to allow Autodesk® Inventor® users to generate a realistic modeled equivalent thread based on an existing Inventor thread feature. Users are able to select an existing thread feature in the model, which the threadModeler then converts to a realistic 3D modeled thread based on the underlying thread feature properties.

 

Modeled threads are accurately generated saving a lot of time and effort for the user when compared with a manual approach, bringing a higher degree of realism to your models.

 

Please watch this short video for an overview of the threadModeler.

Přečíst si dokument nápovědy

Informace o této verzi

Verze 19.0.8, 26.05.2020
Support of Inventor 2020 Note: coolOrange will not further develop the app or provide new versions for newer Inventor versions. The threadModeler for Inventor 2020 is the last version, which is published here. We reserve the right to remove the App from the Autodesk App Store at any time.

Snímky obrazovky a videa


Hodnocení zákazníků

(171 hodnocení)

|

Získat technickou pomoc
  • Version 19.0.8, 5/26/2020
    Darrell Kemp | září 23, 2020 Ověřené stažení (Co je to?)

    I contacted CoolOrange regarding backwards compatability of the latest version as it did not work on my installation of Inventor 2013. Manuel got back to me with a possible workaround, which I tried and after a bit of fiddling I've managed to get it working. For more info go and have a look at https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846430210/FAQ+threadModeler.


  • The best Add-in Is Finally working
    Fawzi Harami | září 02, 2020 Ověřené stažení (Co je to?)

    Working Fine on 2021


  • threadMldeler
    w z | srpna 13, 2020 Ověřené stažení (Co je to?)

    Works perfectly in inventor 2021. Thank you!


  • Does not Work with Tapered Thread
    Ron Dietel | srpna 06, 2020 Ověřené stažení (Co je to?)

    Be advised that the coolOrange App does not work with tapered thread (e.g., NPT thread). Regards.


  • 2021
    Alicia Clark | června 21, 2020 Ověřené stažení (Co je to?)

    As others have said, to get it to work with 2021 simply navigate to this file:  open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan> (you can use notepad) and change the line <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>

    Restart the program and itll load in!


    Stuart Wood | června 29, 2020

    Thankyou ! You are a life saver.


    Patrick Drabik | července 15, 2020

    I have Inventor 2021 and I made the changes in notepad and saved them. It still does not work for me. Any advice?


    Tor Re | července 28, 2020

    Works perfectly in inventor 2021. Thank you!


    Ahmad Asmandar | srpna 18, 2020

    you are the best thank you


    Heiko Schedletzky | srpna 25, 2020

    Funktioniert Danke


    Brian Bischoff | září 21, 2020

    This worked for me! Thanks


  • We need Threadmodeler
    Luigi Monaco | června 15, 2020 Ověřené stažení (Co je to?)

    Would Autodesk please put this peanuts coding in their official product. It saves a lot of time in 3D printing, we need this funkctionality. Does someone listen/ read, please confirm.


    Martijn Peters | srpna 10, 2020

    To my knowledge they have this functionality in Fusion 360, which is free to use for hobbyists.


  • Impossible to make a pinch with a decimal
    Pierre Adam | června 06, 2020 Ověřené stažení (Co je to?)

    All the videos I've seen people can do thread pitch with a decimal. That simply does not work for me on inventor 2020...

    Does someone know how to do it ? Is there a configuration somewhere ?

    I basically can't do a M3x0.5 or M4x0.8. It just doesn't let me. Doesn't even offer an other pitch.

    If I try to go a M10x1.5, that pluging replace the 1.5mm pitch with a 1.0mm

    Thanks for your answers !


  • Version 2021
    Gerald Leto | června 04, 2020 Ověřené stažení (Co je to?)

    Honestly, I am not savvy at any of this, not a programmer, engineer and can barely use this software. That said, it worked for me in version 21 by making the following changes. 

      <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>


    Sai Mallipedhi | června 10, 2020

    Where did you make these changes?


    Kim Verwiel | června 27, 2020

    worked for me to. had to change both 20 and 25 to 21 and 26. thanks. changes are made here . go to this file C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents. then open ''coolOrange.ThreadModeler.Inventor.addin'' in notepad and change the numbers as stated above.


  • version 2021
    Victor Cherkasov | května 24, 2020 Ověřené stažení (Co je to?)

    for 2021 open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan>


    Maxwell Richhart | června 01, 2020

    I see: <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> What do I change the value to for 2021? Thank you!


    Eric Willard | června 02, 2020

    is there a way to make this work with 2021?


  • How do I get it to work in 2021?
    Jeffrey Chapman | května 18, 2020 Ověřené stažení (Co je to?)

    How do I get it to work in 2021?  I gave it a 5 since I know you will solve this problem ;)


  • Update
    Lucas Abate | května 17, 2020 Ověřené stažení (Co je to?)

    2021 version would be great.


    Cool Orange (Vydavatel) | května 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Update needed for Inventor 2021
    Raj Ramoutar | května 01, 2020 Ověřené stažení (Co je to?)

    Can you guys get this working with Inventor 2021 please.Thanks.


    Sarskisiuzk Ctlechops | května 16, 2020

    +1


    Victor Cherkasov | května 24, 2020

    edit file "coolOrange.ThreadModeler.Inventor.addin" <SupportedSoftwareVersionLessThan>


    Cool Orange (Vydavatel) | května 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Best Add On for Inventor ( for me anyway )
    Stuart Wood | dubna 29, 2020 Ověřené stažení (Co je to?)

    Thread Modeller is a fantastic app, which makes adding realism to my models ( for my client to see ) so much easier. But when is the 2021 version arriving ?


  • Best
    Stéphane AGEA | dubna 20, 2020 Ověřené stažení (Co je to?)

    Very Best plugin

    ThreadModeler no longer works on Inventor 2021, is it possible to have an upgrade?

    Thank's


  • Best
    Scrablertt Scrablertt | dubna 09, 2020 Ověřené stažení (Co je to?)

    Thanks a very useful addition. Please make support 2021


    Jjgolff Jjgolff | dubna 16, 2020

    Pasame tu correo electronico.


  • Só funciona em roscas feitas com o comando 'Rosca' em cilindros e furos, não funciona em roscas feito com o comando 'Furo'
    Airton Dos Santos Lima | dubna 01, 2020

    Muito bom o app mas é preciso corrigir este problema.


  • Should Be A Standard Plug-In
    Joseph Bongiorno | ledna 21, 2020 Ověřené stažení (Co je to?)

    Works great and is easy to use. However, I would like to see additonal templates added besides ISO and BSW. I use this feature primairly to display threads on my stl files for 3D printing instead of manually making my threads. Definitley a time saver.


  • hen nb!
    磊 张 | listopadu 19, 2019 Ověřené stažení (Co je to?)

    you juxing luowen gongju jiu geng hao le ( ̄▽ ̄)"


  • Works good
    Georgi Kalchev | září 04, 2019 Ověřené stažení (Co je to?)

    It's very nice program. Works great with metric profile but I needed to make ISO trapezoidal tread and didn't recognise it.


  • OTTIMO
    M P | května 22, 2019 Ověřené stažení (Co je to?)

    Con Inventor 2019 lavora molto bene ottimo


  • not sufficient for 3d Printing
    Nathan Villines | dubna 15, 2019 Ověřené stažení (Co je to?)

    Tried using this to easily 3D print something with male and female threads. Their modeler doesn't have any tolerance for male to female and did not work. 


    Joshua Yates | prosince 04, 2019

    This does work but you have to add in your own clearance, allow 0.3mm or more depending on your printer. For example if your external thread is on a shaft of 25mm, the internal hole for the thread diameter needs to begin at 25.3mm, then use the thread feature and the coolorange tool which would will a gap of 0.15mm all the way around. increase the gap until it works with your printer.


  • Inventor 2019.3
    Karel Cedivoda | března 07, 2019 Ověřené stažení (Co je to?)

    Today I tried it in Inventor 2019. It function. For interior thread it is necessary to make the hole and thread have you make extra.

    Nice :)


    Stefan Maier | února 02, 2020

    I also use Inventor 2019. When i have a M10 interior thread, after transformation with thread modeler it´s a M8! At first i build the hole and after that the thread. What is my mistake? Do you have a solution? Regards Stefan


  • Не для Чертежей
    Дмитро Паденко | ledna 11, 2019 Ověřené stažení (Co je to?)

    Добрый день! Эта надстройка для тех, кто занимается графикой,  или на рендеринг конечной модели...для разработки КД не годится, не отображает в чертеже резьбу, а так штука интересная.


  • Good but could be so much better
    Kirk Arthur | prosince 05, 2018 Ověřené stažení (Co je to?)

    Thanks for this useful app.... To bad Inventor does not give us the option to model the threads like Fusion360.  A few things could make it better, like... make it associative so that if I later change the thread size in the hole, the modeled thread feature also updates. Also, don't add the coil feature to a seperate solid.

    For those that want ANSI (UNF AND UNC) just use the ISO template.  It will give the correct thread model.


  • Awesome, but better if UNC, UNF thread included
    Zhifei Deng | listopadu 12, 2018 Ověřené stažení (Co je to?)

    At titled


  • Support of tapped holes?
    Ko-Keng Chang | října 02, 2018 Ověřené stažení (Co je to?)

    Thank you for the useful tool.

    Is it popssible to turn tapped holes into modeled thread?


  • Very good, needs additional threads.
    Tony Macias | srpna 20, 2018 Ověřené stažení (Co je to?)

    It would be great if UNC, UNF, and NPT thread forms were supported. This is the one improvement I can think of making.


  • Awesome...
    Sebastien Bolle | června 30, 2018 Ověřené stažení (Co je to?)

    Except there is no support for ACME threads. I would love to see that added in a future release.


  • Muy bueno.
    Sebastian Lopez Rubio | května 30, 2018 Ověřené stažení (Co je to?)

    Perfecto y fácil de usar


  • Wow this is amazing.
    Isaacrbeam Isaacrbeam | května 18, 2018 Ověřené stažení (Co je to?)

    Very simple to use and amazing tool. Thanks for the development. Keep up the good work.


  • Maravilloso
    Danaes Arcos | dubna 23, 2018 Ověřené stažení (Co je to?)

    Fácil de intslar y aplicar, Genial¡¡¡


  • Wonderful
    Jzhu C | března 14, 2018 Ověřené stažení (Co je to?)

    Thanks alot


  • Super
    Josef Novák | března 12, 2018 Ověřené stažení (Co je to?)

    Perfektní appka :) .... Perfect app. THANK YOU very much :)


  • Exactly what I wanted from Inventor.
    Perrin Zahn | ledna 21, 2018 Ověřené stažení (Co je to?)

    Amazing. The app is small, making it easy to download just about anywhere, the installation takes seconds, and the thread-converting process is intuitive and easy to do. I literally can't think of anything else I'd want from this add-on.


  • Great tool!
    Lars Van Der Wal | ledna 07, 2018 Ověřené stažení (Co je to?)

    Use it for 3D printing. Thanks :-)


  • worked for small threads
    Fra H | prosince 06, 2017 Ověřené stažení (Co je to?)

    It actually worked great for a 3/8" nc thread, but did not work for a 7/16" nc thread.


  • good
    Ricardo Aleman | listopadu 27, 2017 Ověřené stažení (Co je to?)

    good


  • Excellent Plug-in for 3d Prints
    Sotiris Katsikis | listopadu 19, 2017 Ověřené stažení (Co je to?)

    This is an excellent plugin to enable 3D printing of threads.


  • Great for 3d printing
    Michael Berna | října 23, 2017 Ověřené stažení (Co je to?)

    I use this for converting the built in thread representations to 3d printable objects. This saves me a lot of time and ensures an accurate thread.


  • Perfect idea and very decent plug-in.
    臧 晓晗 | října 13, 2017 Ověřené stažení (Co je to?)

    I like it and I support your plug-in and YouTube channel. By the way, I'm Chinese. LoL


  • Thread annotation
    Katarina Goreta | září 25, 2017 Ověřené stažení (Co je to?)

    how to annotate this thread in drawing for machine operator, I tried but wont let me to annotate!?


  • WOW! Works Great
    Dan Murphy | srpna 17, 2017 Ověřené stažení (Co je to?)

    Click on the tool. Click on the tread file and boom! Saved me a lot of time instead of doing it manually.


  • 3d Printing
    Iain Mcmurray | srpna 16, 2017 Ověřené stažení (Co je to?)

    Amazing and simple to use. Perfect for setting up my models for 3d Printing when I need threads.


  • Perfect!!!
    Johann Hepp | srpna 10, 2017 Ověřené stažení (Co je to?)

    Works better than expected. Relieve the work. Thank you!


  • Great tool
    Brad Headlam | srpna 08, 2017 Ověřené stažení (Co je to?)

    Time saver if you need to fully model the thread. Only downside is creates large file size, but still great.


  • Works good, a few issues
    Frank Okipnak | srpna 04, 2017 Ověřené stažení (Co je to?)

    As everyone else is saying, great for the most part, just needs to be refined so can do more thread styles as well as holes properly. Otherwise, very handy and cool. The error I get the most is "Failed, try with a bigger pitch offset value", no matter what I try, does not work.


  • Super
    Sule Wad | srpna 01, 2017 Ověřené stažení (Co je to?)

    A great Tool


  • Hoze
    Jozsef Sallai | července 29, 2017 Ověřené stažení (Co je to?)

    Hi there, As others have already thanked I also want to do: Thank you guys!


  • easy app to use
    Julian Shepherd | července 13, 2017 Ověřené stažení (Co je to?)

    really easy to use great results .


  • Works good
    Ben Vinck | června 26, 2017 Ověřené stažení (Co je to?)

    It does what's supposeed to do. Nothing more. Nothing less.


  • Excelente!
    Luis Carlos Vega Renteria | června 25, 2017 Ověřené stažení (Co je to?)

    Muy buena aplicacion! Yo te sugiero que hagas un pequeño tutorial de como hacer roscas para NPT ya que creo que nadie sabe como hacerlo. Gracias


  • good
    谢 凡 | června 12, 2017 Ověřené stažení (Co je to?)

    it works very good,especially for 3D print.Thank you!


  • Straightforward and Effective
    Jonathan Bazak | června 09, 2017 Ověřené stažení (Co je to?)

    Does exactly what I needed it to do: make matching 3d-printable threads on holes and surfaces with just a handful of clicks. Support for more non-standard ISO metric threads would be cool, but there are plenty here as-is. Very handy extension to have!


  • good
    Waiman Liu | června 06, 2017 Ověřené stažení (Co je to?)

    very good. i can 3d print many gears now !!


  • Absolutely amazing
    Giacomo Brugnolo | května 24, 2017 Ověřené stažení (Co je to?)

    Very useful for 3d printing and making your components look absolutely better!


  • Awesome
    Ricardo Fernandez Saavedra | května 15, 2017 Ověřené stažení (Co je to?)

    Works perfectly! Thank you!


  • Can't be used with .idw callouts
    Douglas Reiland | května 14, 2017 Ověřené stažení (Co je to?)

    The downloading and aesthetics of threadModeler are fine, but, unfortunately, this application is not compatible with .idw drawings. Inventor does not recognize the threadModeler modifications to the .ipt, therefore they cannot be called out with hole/thread specifications on drawings. I submitted this to coolOrange tech support. They acknowledged that this was a problem and acted as though this was the first time anyone raised this issue with them.


  • VERSION
    Daniel Gamarra | dubna 30, 2017 Ověřené stažení (Co je to?)

    I downloaded the plugin. The installation was successful but i can't see the app in the ribbon. Is it working in version 2018??


  • Worked perfect so far
    Simon Roth | dubna 27, 2017 Ověřené stažení (Co je to?)

    Had no problems with it, created perfect threads for 3d printing. Thank you


  • Very Useful
    Jordan Coquoz | dubna 18, 2017 Ověřené stažení (Co je to?)

    I don"t normally rate things but I wanted to give this five stars because of how amazingly useful this is. Huge thanks to the developers of this tool.


  • Cool so far
    Engineer Draft | dubna 12, 2017 Ověřené stažení (Co je to?)

    Have used it once where I wanted to really expose thread on a drawing, so that immediate clarification would happen. Worked well and was happy, good in context of time saving for those one off type jobs.


  • Works well for me
    Jonathan Colella | dubna 10, 2017 Ověřené stažení (Co je to?)

    No hassle, as advertised


  • Great app needs a few tweeks
    ROGER HOOKER | března 29, 2017 Ověřené stažení (Co je to?)

    it's very responsive, however it's difficult to champher and seemingly impossible to extrude through.


    Fazeel Tahir | června 13, 2019

    did you get any solution for this?


  • Version 2020
    Rodolfo Ramos Castelo Branco | června 18, 2015 Ověřené stažení (Co je to?)

    Good afternoon, for the 2020 version, is it already under development? Thank you

Přejít nahoru