threadModeler

threadModeler

COOLORANGE

Digitally signed app

Kostenlos

Betriebssystem:
Sprache:

Beschreibung

The threadModeler tool has been developed to allow Autodesk® Inventor® users to generate a realistic modeled equivalent thread based on an existing Inventor thread feature. Users are able to select an existing thread feature in the model, which the threadModeler then converts to a realistic 3D modeled thread based on the underlying thread feature properties.

 

Modeled threads are generated saving a lot of time and effort for the user when compared with a manual approach, bringing a higher degree of realism to your models.

 

Please watch this short video for an overview of the threadModeler.

 

As we do not deliver a threadModeler for current Inventor versions, we provide a online version of the threadModeler: http://www.threadmodeler.com/home

Please try this version for newer Inventor versions.

Hilfe lesen

Informationen zu dieser Version

Version 19.0.8, 18.11.2020
Support of Inventor 2020 Note: coolOrange will not further develop the app or provide new versions for newer Inventor versions. The threadModeler for Inventor 2020 is the last version, which is published here. We reserve the right to remove the App from the Autodesk App Store at any time. Instead we provide a online version of the threadModeler: http://www.threadmodeler.com/home Please try this version for newer Inventor versions.

Screenshots und Videos


Kundenbewertungen

(180 Bewertungen)

|

Technische Hilfe erhalten
  • Minor diameter is wrong
    Dickson Lin | April 20, 2021 Geprüfter Download (Was ist das?)

    The Minor diameter created by software is wrong. It's small than standard. please check. 


  • thread molder doesn't show up on the tab for inventor 2020
    Liao Minbau | März 05, 2021 Geprüfter Download (Was ist das?)

    I am using Inventor 2020, this plugin doesn't show up on the tab after installation, but I found it has been installed on the inventor through the app manager? why is that?


    tri nguyen | März 18, 2021

    Trusca Marius Marian | April 13, 2021

    i have the same problem, did someone solve that?


  • Inventor 2021 ?
    Roman Glushenok | März 01, 2021 Geprüfter Download (Was ist das?)

    Really good and usefull plugin! Inventor 2021 please! :-)


  • Error in web conversor
    Francisco Garcia Bayarri | Februar 25, 2021 Geprüfter Download (Was ist das?)

    The cosmetic thread conversion from http://www.threadmodeler.com/home" target="_blank">http://www.threadmodeler.com/home does not work.


  • Update for version 2021
    Jordi Molero Fuertes | Februar 03, 2021 Geprüfter Download (Was ist das?)

    Hello, thank you very much for the application. It works perfectly. In relation to the 2021 version of Inventor, how do you have it?

    Thank you,

    Jordi Molero


    COOL ORANGE (Herausgeber) | Februar 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version: http://www.threadmodeler.com/home


  • does not work on 2021
    Alija Smajic | Januar 19, 2021 Geprüfter Download (Was ist das?)

    hi will it be any update so it works for 2021 inventor ?


    COOL ORANGE (Herausgeber) | Februar 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version: http://www.threadmodeler.com/home


  • Отличное приложение!
    Alex Merzlaykov | Dezember 16, 2020 Geprüfter Download (Was ist das?)

    Молодцы! Спасибо вам! Все работает 2021.


  • Update for Inventor 2021
    | Dezember 09, 2020 Geprüfter Download (Was ist das?)

    Perfect app.
    Use it a lot under inventor 2018 but now I'm under inventor 2021 and doesn't work...
    Can we hope a fast update for Inventor 2021 ?

    Best regards


    Reindert Alexander Bakker | Januar 12, 2021

    There wont be an update to Inventor 2021, 2020 was the latest update. For 2021 you can try this website: (http://www.threadmodeler.com/home)


  • Update ???
    Eric | Dezember 07, 2020 Geprüfter Download (Was ist das?)

    this application "saves" inventory which is obsolete because of the lack of this functionality in native as on fusion! However, currently impossible to install it on inventor 2021! when will you update please?


  • Just what I was looking for
    Thomas Comita | Oktober 03, 2020 Geprüfter Download (Was ist das?)

    This feathur is long overdue in Inventor, SoldWorks has had it now for years.

    I would like Autodesk to put thread cutting option into the Hole command, label the options:  SHADED THREAD, MODELED THREAD.


    COOL ORANGE (Herausgeber) | November 18, 2020

    You also can try the online version: http://www.threadmodeler.com/home


  • Version 19.0.8, 5/26/2020
    Darrell Kemp | September 23, 2020 Geprüfter Download (Was ist das?)

    I contacted CoolOrange regarding backwards compatability of the latest version as it did not work on my installation of Inventor 2013. Manuel got back to me with a possible workaround, which I tried and after a bit of fiddling I've managed to get it working. For more info go and have a look at https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846430210/FAQ+threadModeler.


  • The best Add-in Is Finally working
    Fawzi Harami | September 02, 2020 Geprüfter Download (Was ist das?)

    Working Fine on 2021


    Daniel Dolrie Simanjuntak | April 20, 2021

    I cant, could you tell me how to install it?


  • threadMldeler
    | August 13, 2020 Geprüfter Download (Was ist das?)

    Works perfectly in inventor 2021. Thank you!


    Stefan Königer | November 19, 2020

    How you made it? i read the last version is only for the 2020 IN


  • Does not Work with Tapered Thread
    Ron Dietel | August 06, 2020 Geprüfter Download (Was ist das?)

    Be advised that the coolOrange App does not work with tapered thread (e.g., NPT thread). Regards.


  • 2021
    Alicia Clark | Juni 21, 2020 Geprüfter Download (Was ist das?)

    As others have said, to get it to work with 2021 simply navigate to this file:  open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan> (you can use notepad) and change the line <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>

    Restart the program and itll load in!


    Stuart Wood | Juni 29, 2020

    Thankyou ! You are a life saver.


    Tor Re | Juli 28, 2020

    Works perfectly in inventor 2021. Thank you!


    Ahmad Asmandar | August 18, 2020

    you are the best thank you


    Heiko Schedletzky | August 25, 2020

    Funktioniert Danke


    Brian Bischoff | September 21, 2020

    This worked for me! Thanks


    Owen Sullivan | Oktober 15, 2020

    where do I find this at, is it in Inventor somewhere or on my PC?


    Vitaly Golovko | Oktober 16, 2020

    Thank you!!!


    Robbie Johnson | Oktober 20, 2020

    This info would have been useful to note: if you cannot see the c:\ProgramData folder, go to Control Panel, then Appearance & Personalization, then Folder Options. Click the "View" tab and make sure the bullet that says "Show Hidden Files & Folders" is selected. After you click Apply it will show up.


    Eshel Kedem | November 04, 2020

    Thanks a lot!!! I was so frustrated that it didn't work, but now the skies are sunny again ;-)


    Stefan Königer | November 19, 2020

    Super klappt perfekt vielen Dank


    Polina Shaposhnik | November 20, 2020

    Many thanks Alicia Clark. I couldn't have figured it out by myself. A small additional note: It might still not appear in the navigation panel, therefore one has to go to "Tools->Add-Ins" and manually change the default mark "Blocked" to "Load Automatically".


    Ariel Nemcovsky | November 29, 2020

    GENIUS, god and inventor bless you.


    | Dezember 09, 2020

    Hi, Thank's for this help but don't work for me... Try with <SupportedSoftwareVersionGreaterThan>20..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan> And <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> But no change... Add-in available in Inventor but can't select the hole fonction...


    Jean Lapince | Januar 07, 2021

    Thank you


    Alexandr Yevdokimov | März 30, 2021

    Thank u man ! U Genius !


    Roman Krejčí | April 15, 2021

    Thank You !!


  • We need Threadmodeler
    Luigi Monaco | Juni 15, 2020 Geprüfter Download (Was ist das?)

    Would Autodesk please put this peanuts coding in their official product. It saves a lot of time in 3D printing, we need this funkctionality. Does someone listen/ read, please confirm.


    Martijn Peters | August 10, 2020

    To my knowledge they have this functionality in Fusion 360, which is free to use for hobbyists.


  • Impossible to make a pinch with a decimal
    Pierre Adam | Juni 06, 2020 Geprüfter Download (Was ist das?)

    All the videos I've seen people can do thread pitch with a decimal. That simply does not work for me on inventor 2020...

    Does someone know how to do it ? Is there a configuration somewhere ?

    I basically can't do a M3x0.5 or M4x0.8. It just doesn't let me. Doesn't even offer an other pitch.

    If I try to go a M10x1.5, that pluging replace the 1.5mm pitch with a 1.0mm

    Thanks for your answers !


    pedro ramos | Oktober 30, 2020

    Hello Pierre, Just having the same issue... Did you solved it?


    Pierre Adam | November 02, 2020

    Hello Pedro ! So ... I managed to get it work but I'm not 100% sure of the reason why. But I think the main reason is that I wasn't using the right template. I tried making a M3x0.5 and it worked while using the template C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\Thread Templates\BSW Template.ipt To be honest it's a bit of a shame that the plugin does not really utilize all the thread profiles that inventor utilize. Hope it will work for you !


  • Version 2021
    Gerald Leto | Juni 04, 2020 Geprüfter Download (Was ist das?)

    Honestly, I am not savvy at any of this, not a programmer, engineer and can barely use this software. That said, it worked for me in version 21 by making the following changes. 

      <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>


    Sai Mallipedhi | Juni 10, 2020

    Where did you make these changes?


    Kim Verwiel | Juni 27, 2020

    worked for me to. had to change both 20 and 25 to 21 and 26. thanks. changes are made here . go to this file C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents. then open ''coolOrange.ThreadModeler.Inventor.addin'' in notepad and change the numbers as stated above.


  • version 2021
    Victor Cherkasov | Mai 24, 2020 Geprüfter Download (Was ist das?)

    for 2021 open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan>


    Maxwell Richhart | Juni 01, 2020

    I see: <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> What do I change the value to for 2021? Thank you!


    Eric Willard | Juni 02, 2020

    is there a way to make this work with 2021?


  • How do I get it to work in 2021?
    Jeffrey Chapman | Mai 18, 2020 Geprüfter Download (Was ist das?)

    How do I get it to work in 2021?  I gave it a 5 since I know you will solve this problem ;)


  • Update
    Lucas Abate | Mai 17, 2020 Geprüfter Download (Was ist das?)

    2021 version would be great.


    COOL ORANGE (Herausgeber) | Mai 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Update needed for Inventor 2021
    Raj Ramoutar | Mai 01, 2020 Geprüfter Download (Was ist das?)

    Can you guys get this working with Inventor 2021 please.Thanks.


    Sarskisiuzk Ctlechops | Mai 16, 2020

    +1


    Victor Cherkasov | Mai 24, 2020

    edit file "coolOrange.ThreadModeler.Inventor.addin" <SupportedSoftwareVersionLessThan>


    COOL ORANGE (Herausgeber) | Mai 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Best Add On for Inventor ( for me anyway )
    Stuart Wood | April 29, 2020 Geprüfter Download (Was ist das?)

    Thread Modeller is a fantastic app, which makes adding realism to my models ( for my client to see ) so much easier. But when is the 2021 version arriving ?


  • Best
    Stéphane AGEA | April 20, 2020 Geprüfter Download (Was ist das?)

    Very Best plugin

    ThreadModeler no longer works on Inventor 2021, is it possible to have an upgrade?

    Thank's


  • Best
    Scrablertt Scrablertt | April 09, 2020 Geprüfter Download (Was ist das?)

    Thanks a very useful addition. Please make support 2021


    Jjgolff Jjgolff | April 16, 2020

    Pasame tu correo electronico.


  • Só funciona em roscas feitas com o comando 'Rosca' em cilindros e furos, não funciona em roscas feito com o comando 'Furo'
    Airton Dos Santos Lima | April 01, 2020

    Muito bom o app mas é preciso corrigir este problema.


  • Should Be A Standard Plug-In
    Joseph Bongiorno | Januar 21, 2020 Geprüfter Download (Was ist das?)

    Works great and is easy to use. However, I would like to see additonal templates added besides ISO and BSW. I use this feature primairly to display threads on my stl files for 3D printing instead of manually making my threads. Definitley a time saver.


  • hen nb!
    | November 19, 2019 Geprüfter Download (Was ist das?)

    you juxing luowen gongju jiu geng hao le ( ̄▽ ̄)"


  • Works good
    Georgi Kalchev | September 04, 2019 Geprüfter Download (Was ist das?)

    It's very nice program. Works great with metric profile but I needed to make ISO trapezoidal tread and didn't recognise it.


  • OTTIMO
    M P | Mai 22, 2019 Geprüfter Download (Was ist das?)

    Con Inventor 2019 lavora molto bene ottimo


  • not sufficient for 3d Printing
    Nathan Villines | April 15, 2019 Geprüfter Download (Was ist das?)

    Tried using this to easily 3D print something with male and female threads. Their modeler doesn't have any tolerance for male to female and did not work. 


    Joshua Yates | Dezember 04, 2019

    This does work but you have to add in your own clearance, allow 0.3mm or more depending on your printer. For example if your external thread is on a shaft of 25mm, the internal hole for the thread diameter needs to begin at 25.3mm, then use the thread feature and the coolorange tool which would will a gap of 0.15mm all the way around. increase the gap until it works with your printer.


  • Inventor 2019.3
    Karel Cedivoda | März 07, 2019 Geprüfter Download (Was ist das?)

    Today I tried it in Inventor 2019. It function. For interior thread it is necessary to make the hole and thread have you make extra.

    Nice :)


    Stefan Maier | Februar 02, 2020

    I also use Inventor 2019. When i have a M10 interior thread, after transformation with thread modeler it´s a M8! At first i build the hole and after that the thread. What is my mistake? Do you have a solution? Regards Stefan


  • Не для Чертежей
    Дмитро Паденко | Januar 11, 2019 Geprüfter Download (Was ist das?)

    Добрый день! Эта надстройка для тех, кто занимается графикой,  или на рендеринг конечной модели...для разработки КД не годится, не отображает в чертеже резьбу, а так штука интересная.


  • Good but could be so much better
    Kirk Arthur | Dezember 05, 2018 Geprüfter Download (Was ist das?)

    Thanks for this useful app.... To bad Inventor does not give us the option to model the threads like Fusion360.  A few things could make it better, like... make it associative so that if I later change the thread size in the hole, the modeled thread feature also updates. Also, don't add the coil feature to a seperate solid.

    For those that want ANSI (UNF AND UNC) just use the ISO template.  It will give the correct thread model.


  • Awesome, but better if UNC, UNF thread included
    Zhifei Deng | November 12, 2018 Geprüfter Download (Was ist das?)

    At titled


  • Support of tapped holes?
    Ko-Keng Chang | Oktober 02, 2018 Geprüfter Download (Was ist das?)

    Thank you for the useful tool.

    Is it popssible to turn tapped holes into modeled thread?


  • Very good, needs additional threads.
    Tony Macias | August 20, 2018 Geprüfter Download (Was ist das?)

    It would be great if UNC, UNF, and NPT thread forms were supported. This is the one improvement I can think of making.


  • Awesome...
    Sebastien Bolle | Juni 30, 2018 Geprüfter Download (Was ist das?)

    Except there is no support for ACME threads. I would love to see that added in a future release.


  • Muy bueno.
    Sebastian Lopez Rubio | Mai 30, 2018 Geprüfter Download (Was ist das?)

    Perfecto y fácil de usar


  • Wow this is amazing.
    Isaacrbeam Isaacrbeam | Mai 18, 2018 Geprüfter Download (Was ist das?)

    Very simple to use and amazing tool. Thanks for the development. Keep up the good work.


  • Maravilloso
    Danaes Arcos | April 23, 2018 Geprüfter Download (Was ist das?)

    Fácil de intslar y aplicar, Genial¡¡¡


  • Wonderful
    Jzhu | März 14, 2018 Geprüfter Download (Was ist das?)

    Thanks alot


  • Super
    Josef Novák | März 12, 2018 Geprüfter Download (Was ist das?)

    Perfektní appka :) .... Perfect app. THANK YOU very much :)


  • Exactly what I wanted from Inventor.
    Perrin Zahn | Januar 21, 2018 Geprüfter Download (Was ist das?)

    Amazing. The app is small, making it easy to download just about anywhere, the installation takes seconds, and the thread-converting process is intuitive and easy to do. I literally can't think of anything else I'd want from this add-on.


  • Great tool!
    Lars Van Der Wal | Januar 07, 2018 Geprüfter Download (Was ist das?)

    Use it for 3D printing. Thanks :-)


  • worked for small threads
    Fra | Dezember 06, 2017 Geprüfter Download (Was ist das?)

    It actually worked great for a 3/8" nc thread, but did not work for a 7/16" nc thread.


  • good
    Ricardo Aleman | November 27, 2017 Geprüfter Download (Was ist das?)

    good


  • Excellent Plug-in for 3d Prints
    Sotiris Katsikis | November 19, 2017 Geprüfter Download (Was ist das?)

    This is an excellent plugin to enable 3D printing of threads.


  • Great for 3d printing
    Michael Berna | Oktober 23, 2017 Geprüfter Download (Was ist das?)

    I use this for converting the built in thread representations to 3d printable objects. This saves me a lot of time and ensures an accurate thread.


  • Perfect idea and very decent plug-in.
    晓晗 | Oktober 13, 2017 Geprüfter Download (Was ist das?)

    I like it and I support your plug-in and YouTube channel. By the way, I'm Chinese. LoL


  • Thread annotation
    Katarina Goreta | September 25, 2017 Geprüfter Download (Was ist das?)

    how to annotate this thread in drawing for machine operator, I tried but wont let me to annotate!?


  • WOW! Works Great
    Murphy | August 17, 2017 Geprüfter Download (Was ist das?)

    Click on the tool. Click on the tread file and boom! Saved me a lot of time instead of doing it manually.


  • 3d Printing
    Iain Mcmurray | August 16, 2017 Geprüfter Download (Was ist das?)

    Amazing and simple to use. Perfect for setting up my models for 3d Printing when I need threads.


  • Perfect!!!
    Johann Hepp | August 10, 2017 Geprüfter Download (Was ist das?)

    Works better than expected. Relieve the work. Thank you!


  • Great tool
    Brad Headlam | August 08, 2017 Geprüfter Download (Was ist das?)

    Time saver if you need to fully model the thread. Only downside is creates large file size, but still great.


  • Works good, a few issues
    Frank Okipnak | August 04, 2017 Geprüfter Download (Was ist das?)

    As everyone else is saying, great for the most part, just needs to be refined so can do more thread styles as well as holes properly. Otherwise, very handy and cool. The error I get the most is "Failed, try with a bigger pitch offset value", no matter what I try, does not work.


  • Super
    Sule Wad | August 01, 2017 Geprüfter Download (Was ist das?)

    A great Tool


  • Hoze
    Jozsef Sallai | Juli 29, 2017 Geprüfter Download (Was ist das?)

    Hi there, As others have already thanked I also want to do: Thank you guys!


  • easy app to use
    Julian Shepherd | Juli 13, 2017 Geprüfter Download (Was ist das?)

    really easy to use great results .


  • Works good
    Vinck | Juni 26, 2017 Geprüfter Download (Was ist das?)

    It does what's supposeed to do. Nothing more. Nothing less.


  • Excelente!
    Luis Carlos Vega Renteria | Juni 25, 2017 Geprüfter Download (Was ist das?)

    Muy buena aplicacion! Yo te sugiero que hagas un pequeño tutorial de como hacer roscas para NPT ya que creo que nadie sabe como hacerlo. Gracias


  • good
    | Juni 12, 2017 Geprüfter Download (Was ist das?)

    it works very good,especially for 3D print.Thank you!


  • Straightforward and Effective
    Jonathan Bazak | Juni 09, 2017 Geprüfter Download (Was ist das?)

    Does exactly what I needed it to do: make matching 3d-printable threads on holes and surfaces with just a handful of clicks. Support for more non-standard ISO metric threads would be cool, but there are plenty here as-is. Very handy extension to have!


  • good
    Waiman Liu | Juni 06, 2017 Geprüfter Download (Was ist das?)

    very good. i can 3d print many gears now !!


  • Absolutely amazing
    Giacomo Brugnolo | Mai 24, 2017 Geprüfter Download (Was ist das?)

    Very useful for 3d printing and making your components look absolutely better!


  • Awesome
    Ricardo Fernandez Saavedra | Mai 15, 2017 Geprüfter Download (Was ist das?)

    Works perfectly! Thank you!


  • Can't be used with .idw callouts
    Douglas Reiland | Mai 14, 2017 Geprüfter Download (Was ist das?)

    The downloading and aesthetics of threadModeler are fine, but, unfortunately, this application is not compatible with .idw drawings. Inventor does not recognize the threadModeler modifications to the .ipt, therefore they cannot be called out with hole/thread specifications on drawings. I submitted this to coolOrange tech support. They acknowledged that this was a problem and acted as though this was the first time anyone raised this issue with them.


  • VERSION
    Daniel Gamarra | April 30, 2017 Geprüfter Download (Was ist das?)

    I downloaded the plugin. The installation was successful but i can't see the app in the ribbon. Is it working in version 2018??


  • Worked perfect so far
    Simon Roth | April 27, 2017 Geprüfter Download (Was ist das?)

    Had no problems with it, created perfect threads for 3d printing. Thank you


  • Very Useful
    Jordan Coquoz | April 18, 2017 Geprüfter Download (Was ist das?)

    I don"t normally rate things but I wanted to give this five stars because of how amazingly useful this is. Huge thanks to the developers of this tool.


  • Cool so far
    Engineer Draft | April 12, 2017 Geprüfter Download (Was ist das?)

    Have used it once where I wanted to really expose thread on a drawing, so that immediate clarification would happen. Worked well and was happy, good in context of time saving for those one off type jobs.


  • Works well for me
    Jonathan Colella | April 10, 2017 Geprüfter Download (Was ist das?)

    No hassle, as advertised


  • Great app needs a few tweeks
    ROGER HOOKER | März 29, 2017 Geprüfter Download (Was ist das?)

    it's very responsive, however it's difficult to champher and seemingly impossible to extrude through.


    | Juni 13, 2019

    did you get any solution for this?


  • Version 2020
    Rodolfo Ramos Castelo Branco | Juni 18, 2015 Geprüfter Download (Was ist das?)

    Good afternoon, for the 2020 version, is it already under development? Thank you

Nach oben