Duct Pro

Digitally signed app

Versión de prueba
SO:
Idioma:

Descripción

Duct Pro runs side by side with Autodesk® Inventor® and automates the creation of standard sheet metal duct components. It increases productivity by saving the designer time from manually creating sheet metal duct components and geometry by utilizing its intuitive graphical user interface.

 

Note: This app uses a custom installer (and not the standard App Store installer).

Acerca de esta versión

Versión 8.0.0, 19/04/2021
What's New: <8.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - [New] Inventor 2022 Compatibility <7.0.2> *** No Activation required when upgrading from version 7.x.x *** - [Bug] Part Number assignment was fixed - Sub-components of all multipart Duct Pro models were given the same Part Number. <7.0.1> - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added

Capturas de pantalla y vídeos


Reseñas de clientes

10 reseñas
Obtener ayuda técnica
  • Almost
    Josh Gorham | octubre 05, 2021 Descarga verificada (¿Qué es esto?)

    Went looking for an alternative when the software I normally use was not available. Missing connection and seam options, if you use a pittsburg machine or need flanged connections forget it.

    Pieter van der Westhuizen (Editor) | octubre 07, 2021

    Hi Josh, thanks for the review. Yes, Duct Pro is aimed more at the "heavy-gauge" steel ducting industry.


  • nice
    hassan sadiek | mayo 20, 2021

    Amazing tool for inventor, how can I buy It? 

    Pieter van der Westhuizen (Editor) | mayo 24, 2021

    Please email me: ivtools@mgfx.co.za


  • Great tool..
    Milan Kantaria | septiembre 29, 2018 Descarga verificada (¿Qué es esto?)

    Great tool..What is the price ? how can i buy it ?


  • This App for duct is way better than Revit.
    Steve Nguyen | septiembre 28, 2018

    I have been using this app for 7 days to created custom duct work and it saves a lot of time.

    But I have some improvements for this app and also more connection for duct if you can add to the app then this is the best.

    1. this duct connection is plate but there are other like angle connection.

    2. Can you add on/off hole feature for flange

    3. have a tab for duct assembly start duct overall length then connection flange types like plate or angle and size. (this help the user not to build assy.) look at the Inventor Bolt connection feature for an idea.

    4. Custom file name with sequence number per company.

    5. file storage location. set file path or after place duct assembly pops up for location save.

    6. hardware connection if flange has a hole.

    7. general material setting to company template or styles.

    Keep up the good work.

    I am working with my company to approve 10 seats of this app.

     

    Pieter van der Westhuizen (Editor) | octubre 02, 2018

    Hi thanks for the comment and suggestions. Please contact me via email to discuss further: ivtools@mgfx.co.za


  • Good
    Bogumił Wójcik | septiembre 11, 2018 Descarga verificada (¿Qué es esto?)

    :) very good app!!!


  • Wow how can I buy it?
    Enry Riporter | agosto 27, 2018 Descarga verificada (¿Qué es esto?)

    Amazing tool for inventor, how can I buy It? 


  • Time saver
    Ian Reed | junio 18, 2018 Descarga verificada (¿Qué es esto?)

    Saved so much time doing square to round connections and flanges.  Easily saved a days work of work. 

    Pieter van der Westhuizen (Editor) | junio 21, 2018

    Thanks for the compliment and good rating!


  • excellent
    Nicolas Beyer | mayo 11, 2017 Descarga verificada (¿Qué es esto?)

    Impressionant et excellent plugin !


  • good
    christian choquehuanca yanqui | noviembre 30, 2015

    4


  • Time saving and amazing app
    Pascal David | noviembre 04, 2015 Descarga verificada (¿Qué es esto?)

    This app is one of my favorite. The things that you can do and the time saving makes it realy awsome.

    Pieter van der Westhuizen (Editor) | noviembre 05, 2015

    Thanks for the kind words Pascal!

Ir arriba