Digitally signed app



The threadModeler tool has been developed to allow Autodesk® Inventor® users to generate a realistic modeled equivalent thread based on an existing Inventor thread feature. Users are able to select an existing thread feature in the model, which the threadModeler then converts to a realistic 3D modeled thread based on the underlying thread feature properties.

Modeled threads are generated saving a lot of time and effort for the user when compared with a manual approach, bringing a higher degree of realism to your models.



Unfortunately, threadModeler is discontinued and is not compatible with Inventor 2023.

The last version of threadModeler is compatible with Inventor 2018, 2019 and 2020.

We also released an online version which you can find it on


Please use the online version for Inventor versions newer than Inventor 2020.



バージョン 19.0.8, 2023/02/08
Support of Inventor 2020 ********************************************************************************************************************************************* Note: coolOrange will not further develop the app or provide new versions for newer Inventor versions. The threadModeler for Inventor 2020 is the last version, which is published here. We reserve the right to remove the App from the Autodesk App Store at any time. Instead we provide a online version of the threadModeler: Please try this version for newer Inventor versions. *********************************************************************************************************************************************


カスタマ レビュー

196 件のレビュー
テクニカル ヘルプを表示
  • Dissapointing
    Mindcode Mindcode | 12月 07, 2023 確認済みダウンロード (これは何ですか?)

    Come on make it 2023


    Adrián Jiménez | 1月 11, 2024


    alexander böttcher | 4月 12, 2024


  • Good app
    Binh Pham | 9月 30, 2023 確認済みダウンロード (これは何ですか?)

    thật tuyệt khi sử dụng để không phải thấy hình dạng ren nhàm chán. Cảm ơn

  • why discontinue when you can make a default item?
    Bart Mariani | 2月 12, 2023 確認済みダウンロード (これは何ですか?)

    Modeled threads should be a selectable option when adding threads! They should also retain the thread information as the non-modelled threads do!!!!!!

    Love the app, still want the functionality in 2021 and beyond without an upload.

  • Update the tool
    Raja Mohamed | 11月 23, 2022

    Awesome tool!  But, ThreadModeler has only 2 standard types of thread (1. BSW Template and 2. ISO Template).  

    What about other standard threads?

    Please update the tool.

  • Works with tweakings
    Alejandro Sanchiz Torres | 8月 05, 2022 確認済みダウンロード (これは何ですか?)

    Working on Inventor 2021 with tweakings. Look for Brian Bobbit on YouTube.

    Is there any way to add new threads like normal threads.xls? I want to model PG threads.

    Symon Gaskell | 9月 15, 2022

    It did not work for me.

  • threadModeler ayuda
    carlos diaz | 7月 14, 2022 確認済みダウンロード (これは何ですか?)

    Como instalar en inventor 2023 ????

    necesito saber como hecerlo 


    no me quiere funcionar 

    COOL ORANGE (公開元) | 7月 27, 2022

    Hi Carlos! Please try to use the online version of the theradModeler: This supports Inventor 2023. Saludos Markus

    Marcelo De Tomasi | 8月 01, 2022

    Carlos, ya no hacen mas la version para Inventor desktop. Podes is a la app on line y generarlo ahi. online version of the threadModeler: Saludos, Marcelo

    Donald Clack | 10月 06, 2022

    The online version is not working... I am trying to use the solution posted below where you open the coolOrange file in notepad and change the revision number. I do not see that file when I search my c:/drive. Anyone have any ideas?

  • Trapezoidal thread
    Konstantin Schmäh | 7月 14, 2022 確認済みダウンロード (これは何ですか?)

    I nedd to make a trapezoidal thread the templates Iso is only work for a metric thread

    Can anyione help me please

  • How to fix threadModeler not show in add-in
    Thossaplon Pruksakasemsuk | 6月 17, 2022 確認済みダウンロード (これは何ですか?)

    1. Go C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents

    2. Find "coolOrange.ThreadModeler.Inventor.addin" open this file by use notepad


    3.Change number to be auto desk your version <SupportedSoftwareVersionGreaterThan>21 <SupportedSoftwareVersionLessThan>26

    2021 = GreaterThan>21 LessThan>26

    2022 = GreaterThan>22 LessThan>27

    2023 = GreaterThan>23 LessThan>28

    GreaterThan> = your version

    LessThan> = your version + 5

    Fawzi Harami | 10月 17, 2022

    Thank you

    Ererw Erwerw | 11月 02, 2022

    Thanks for clearing it up, it's working

    Shane LaMontagne | 12月 22, 2022

    Thank you! You absolutely rock!

    René Niemeier | 4月 13, 2023

    Thanks alot! :*

    Adam Edin | 7月 01, 2023

    What a legend, Thank you!

    Allard Franck | 11月 20, 2023

    Works with 2024 version as well. Thank you so much! I have been using this trick the last 3 versions.

    alexander böttcher | 4月 12, 2024

    still working! thx!

  • threadModeler for Inventor 2023
    Katerine Alvarado | 5月 25, 2022 確認済みダウンロード (これは何ですか?)

    Hello, I would like to know if it is possible to install threadModeler in Inventor 2023, I was checking that there are people who have achieved it in version 2022, but the link they used is no longer available, I need your help, please.

    Milan Schwarz | 6月 09, 2022

    Hi, there is way how to use this app with Inventor 2023. You can see advise on this site.... for 2023: GreaterThan>22.. LessThan>28..

    Toni Kuusilehto | 6月 10, 2022

    Thanks Milan, I followed this procedure 1. c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\ folder. In Notepad, open the PackageContents.xml file and edit the string SeriesMax="Ir24" to SeriesMax="Ir26" 2. Now, in the Contents subfolder, open the coolOrange.ThreadModeler.Inventor.addin file in Notepad and edit GreaterThan>22.. LessThan>28 . Save the file again.

  • Not compatible with 2023 file
    Damien Fontaine | 4月 20, 2022 確認済みダウンロード (これは何ですか?)

    Not compatible with 2023 file

    guancheng huang | 6月 08, 2022

    So do I

  • I downloaded and installed for IV 2022... but it doesn't show up?
    Chris Fritsche | 8月 04, 2021 確認済みダウンロード (これは何ですか?)

    I downloaded and installed it for IV 2022... but it doesn't show up in the add-ins? It shows up in the "App Manager" as "up to date"...

    剑军 邓 | 8月 11, 2021

    Search "Alicia Clark" in this page, you can find the solution. open this file "coolOrange.ThreadModeler.Inventor.addin" (I use the Visual Studio to open it), then change the vaules as Djmocontato Djmocontato says(20 to 22, 25 to 27), and save the file, then restart the inventor. Then follow the solution "Problem: The threadModeler panel is not visible in the coolOrange ribbon after installation" descripbed in

    Lol Pablo | 8月 25, 2021

    Working in 2021 and 2022 FIX Folder ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents File: coolOrange.ThreadModeler.Inventor Change those 2 lines to 22 and 28 "SupportedSoftwareVersionGreaterThan 22 "SupportedSoftwareVersionLessThan 28

  • For Inventor 2022
    Djmocontato Djmocontato | 7月 16, 2021 確認済みダウンロード (これは何ですか?)

    For Inventor 2022 I modified the coolOrange.ThreadModeler.Inventor file to 22 and 27. It worked.
    But I had to unlock as per this instruction.

    Fawzi Harami | 8月 01, 2021

    IT IS ALIVE...IT IS ALIVE Thank you, finally it is working again.

  • Fusion
    Konrad Glura | 7月 02, 2021 確認済みダウンロード (これは何ですか?)


  • It's pretty good
    Emanuel Ciocan | 5月 11, 2021 確認済みダウンロード (これは何ですか?)


    - It works great

    - It looks great, though I don't know what impact it has on Inventor performance if used extensively throughout a project

    - Search other reviewers for how to modify C:Program Data to make it work in 2022 and it will run fine.

    Negatives that I see:

    - It doesn't play quite perfectly with Inventor. You may have issues with working with your part after using thread modeler (extruding, revolving, chamfering etc.).

    - Unfortunately it doesn't update if you modify dimensions. I just delete the revolutions and coil it created and start over. For parts you know won't be modified it's great.

    - If it locks up for some reason, there's no x button. You pretty much have to restart Inventor.

    Francisco Contreras | 7月 18, 2021

    como hago para que funcione en la versión 2022

  • Minor diameter is wrong
    Dickson Lin | 4月 20, 2021 確認済みダウンロード (これは何ですか?)

    The Minor diameter created by software is wrong. It's small than standard. please check. 

    Dominic Chan | 4月 15, 2022

    Yes I concur. I've stopped using it now and started creating my own threads. Much more accurate.

  • thread molder doesn't show up on the tab for inventor 2020
    Liao Minbau | 3月 05, 2021 確認済みダウンロード (これは何ですか?)

    I am using Inventor 2020, this plugin doesn't show up on the tab after installation, but I found it has been installed on the inventor through the app manager? why is that?

    tri nguyen | 3月 18, 2021
    Trusca Marius Marian | 4月 13, 2021

    i have the same problem, did someone solve that?

    COOL ORANGE (公開元) | 7月 02, 2021

    Maybe you need to unblock and activate the 'Load automatically' and 'Loaded' settings in the Add-In Manager. Please refer to the section "Problem: The threadModeler panel is not visible in the coolOrange ribbon after installation" of the FAQ (

  • Inventor 2021 ?
    Roman Glushenok | 3月 01, 2021 確認済みダウンロード (これは何ですか?)

    Really good and usefull plugin! Inventor 2021 please! :-)

  • Error in web conversor
    Francisco Garcia Bayarri | 2月 25, 2021 確認済みダウンロード (これは何ですか?)

    The cosmetic thread conversion from" target="_blank"> does not work.

  • Online version - Nope, sorry.
    James Lovell | 2月 18, 2021 確認済みダウンロード (これは何ですか?)

    2021 online version... no thanks! tried it once, got and error and not sure I want to be uploading my files to a random server (privacy issues) Unfortunate you have stopped developing it. :(

  • Update for version 2021
    Jordi Molero Fuertes | 2月 03, 2021 確認済みダウンロード (これは何ですか?)

    Hello, thank you very much for the application. It works perfectly. In relation to the 2021 version of Inventor, how do you have it?

    Thank you,

    Jordi Molero

    COOL ORANGE (公開元) | 2月 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version:

  • does not work on 2021
    Alija Smajic | 1月 19, 2021 確認済みダウンロード (これは何ですか?)

    hi will it be any update so it works for 2021 inventor ?

    COOL ORANGE (公開元) | 2月 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version:

  • Отличное приложение!
    Alex Merzlaykov | 12月 16, 2020 確認済みダウンロード (これは何ですか?)

    Молодцы! Спасибо вам! Все работает 2021.

  • Update for Inventor 2021
    Q M | 12月 09, 2020 確認済みダウンロード (これは何ですか?)

    Perfect app.
    Use it a lot under inventor 2018 but now I'm under inventor 2021 and doesn't work...
    Can we hope a fast update for Inventor 2021 ?

    Best regards

    Reindert Alexander Bakker | 1月 12, 2021

    There wont be an update to Inventor 2021, 2020 was the latest update. For 2021 you can try this website: (

  • Update ???
    T Eric | 12月 07, 2020 確認済みダウンロード (これは何ですか?)

    this application "saves" inventory which is obsolete because of the lack of this functionality in native as on fusion! However, currently impossible to install it on inventor 2021! when will you update please?

  • Just what I was looking for
    Thomas Comita | 10月 03, 2020 確認済みダウンロード (これは何ですか?)

    This feathur is long overdue in Inventor, SoldWorks has had it now for years.

    I would like Autodesk to put thread cutting option into the Hole command, label the options:  SHADED THREAD, MODELED THREAD.

    COOL ORANGE (公開元) | 11月 18, 2020

    You also can try the online version:

  • Version 19.0.8, 5/26/2020
    Darrell Kemp | 9月 23, 2020 確認済みダウンロード (これは何ですか?)

    I contacted CoolOrange regarding backwards compatability of the latest version as it did not work on my installation of Inventor 2013. Manuel got back to me with a possible workaround, which I tried and after a bit of fiddling I've managed to get it working. For more info go and have a look at

  • The best Add-in Is Finally working
    Fawzi Harami | 9月 02, 2020 確認済みダウンロード (これは何ですか?)

    Working Fine on 2021

    Daniel Dolrie Simanjuntak | 4月 20, 2021

    I cant, could you tell me how to install it?

  • threadMldeler
    w z | 8月 13, 2020 確認済みダウンロード (これは何ですか?)

    Works perfectly in inventor 2021. Thank you!

    Stefan Königer | 11月 19, 2020

    How you made it? i read the last version is only for the 2020 IN

  • Does not Work with Tapered Thread
    Ron Dietel | 8月 06, 2020 確認済みダウンロード (これは何ですか?)

    Be advised that the coolOrange App does not work with tapered thread (e.g., NPT thread). Regards.

  • 2021
    Alicia Clark | 6月 21, 2020 確認済みダウンロード (これは何ですか?)

    As others have said, to get it to work with 2021 simply navigate to this file:  open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan> (you can use notepad) and change the line <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>


    Restart the program and itll load in!

    Stuart Wood | 6月 29, 2020

    Thankyou ! You are a life saver.

    Tor Re | 7月 28, 2020

    Works perfectly in inventor 2021. Thank you!

    Ahmad Asmandar | 8月 18, 2020

    you are the best thank you

    Heiko Schedletzky | 8月 25, 2020

    Funktioniert Danke

    Brian Bischoff | 9月 21, 2020

    This worked for me! Thanks

    Owen Sullivan | 10月 15, 2020

    where do I find this at, is it in Inventor somewhere or on my PC?

    Vitaly Golovko | 10月 16, 2020

    Thank you!!!

    Robbie Johnson | 10月 20, 2020

    This info would have been useful to note: if you cannot see the c:\ProgramData folder, go to Control Panel, then Appearance & Personalization, then Folder Options. Click the "View" tab and make sure the bullet that says "Show Hidden Files & Folders" is selected. After you click Apply it will show up.

    Eshel Kedem | 11月 04, 2020

    Thanks a lot!!! I was so frustrated that it didn't work, but now the skies are sunny again ;-)

    Stefan Königer | 11月 19, 2020

    Super klappt perfekt vielen Dank

    Polina Shaposhnik | 11月 20, 2020

    Many thanks Alicia Clark. I couldn't have figured it out by myself. A small additional note: It might still not appear in the navigation panel, therefore one has to go to "Tools->Add-Ins" and manually change the default mark "Blocked" to "Load Automatically".

    Ariel Nemcovsky | 11月 29, 2020

    GENIUS, god and inventor bless you.

    Q M | 12月 09, 2020

    Hi, Thank's for this help but don't work for me... Try with <SupportedSoftwareVersionGreaterThan>20..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan> And <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> But no change... Add-in available in Inventor but can't select the hole fonction...

    Jean Lapince | 1月 07, 2021

    Thank you

    Alexandr Yevdokimov | 3月 30, 2021

    Thank u man ! U Genius !

    Roman Krejčí | 4月 15, 2021

    Thank You !!

    Gonzalo Bastias | 4月 23, 2021

    Thanks a lot! This works even for the 2022 version by changing: <SupportedSoftwareVersionGreaterThan>22..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>27..</SupportedSoftwareVersionLessThan>

    Gilles Roures | 5月 07, 2021

    Merci beaucoup!!! RG

    William Pietermans | 5月 18, 2021

    WOW legend, thanks!

    Irina Petriv | 6月 22, 2021

    It is actually work for 2022 after this small improvement - just don't forget to unblock it in Add-Ins and make/check a settings Load Automatically + Loaded ))))

    Piotr Jedrzejewski | 8月 11, 2021


    Joe Otero | 12月 04, 2021

    wow man, thank you so much!!

    Ruth Perez | 7月 05, 2022

    Works perfectly in inventor 2021. Thank you!

  • We need Threadmodeler
    Luigi Monaco | 6月 15, 2020 確認済みダウンロード (これは何ですか?)

    Would Autodesk please put this peanuts coding in their official product. It saves a lot of time in 3D printing, we need this funkctionality. Does someone listen/ read, please confirm.

    Martijn Peters | 8月 10, 2020

    To my knowledge they have this functionality in Fusion 360, which is free to use for hobbyists.

  • Impossible to make a pinch with a decimal
    Pierre Adam | 6月 06, 2020 確認済みダウンロード (これは何ですか?)

    All the videos I've seen people can do thread pitch with a decimal. That simply does not work for me on inventor 2020...

    Does someone know how to do it ? Is there a configuration somewhere ?

    I basically can't do a M3x0.5 or M4x0.8. It just doesn't let me. Doesn't even offer an other pitch.

    If I try to go a M10x1.5, that pluging replace the 1.5mm pitch with a 1.0mm

    Thanks for your answers !

    pedro ramos | 10月 30, 2020

    Hello Pierre, Just having the same issue... Did you solved it?

    Pierre Adam | 11月 02, 2020

    Hello Pedro ! So ... I managed to get it work but I'm not 100% sure of the reason why. But I think the main reason is that I wasn't using the right template. I tried making a M3x0.5 and it worked while using the template C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\Thread Templates\BSW Template.ipt To be honest it's a bit of a shame that the plugin does not really utilize all the thread profiles that inventor utilize. Hope it will work for you !

  • Version 2021
    Gerald Leto | 6月 04, 2020 確認済みダウンロード (これは何ですか?)

    Honestly, I am not savvy at any of this, not a programmer, engineer and can barely use this software. That said, it worked for me in version 21 by making the following changes. 



    Sai Mallipedhi | 6月 10, 2020

    Where did you make these changes?

    Kim Verwiel | 6月 27, 2020

    worked for me to. had to change both 20 and 25 to 21 and 26. thanks. changes are made here . go to this file C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents. then open ''coolOrange.ThreadModeler.Inventor.addin'' in notepad and change the numbers as stated above.

  • version 2021
    Victor Cherkasov | 5月 24, 2020 確認済みダウンロード (これは何ですか?)

    for 2021 open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan>

    Maxwell Richhart | 6月 01, 2020

    I see: <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> What do I change the value to for 2021? Thank you!

    Eric Willard | 6月 02, 2020

    is there a way to make this work with 2021?

  • How do I get it to work in 2021?
    Jeffrey Chapman | 5月 18, 2020 確認済みダウンロード (これは何ですか?)

    How do I get it to work in 2021?  I gave it a 5 since I know you will solve this problem ;)

  • Update
    Lucas Abate | 5月 17, 2020 確認済みダウンロード (これは何ですか?)

    2021 version would be great.

    COOL ORANGE (公開元) | 5月 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository:

  • Update needed for Inventor 2021
    Raj Ramoutar | 5月 01, 2020 確認済みダウンロード (これは何ですか?)

    Can you guys get this working with Inventor 2021 please.Thanks.

    Sarskisiuzk Ctlechops | 5月 16, 2020


    Victor Cherkasov | 5月 24, 2020

    edit file "coolOrange.ThreadModeler.Inventor.addin" <SupportedSoftwareVersionLessThan>

    COOL ORANGE (公開元) | 5月 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository:

  • Best Add On for Inventor ( for me anyway )
    Stuart Wood | 4月 29, 2020 確認済みダウンロード (これは何ですか?)

    Thread Modeller is a fantastic app, which makes adding realism to my models ( for my client to see ) so much easier. But when is the 2021 version arriving ?

  • Best
    Stéphane AGEA | 4月 20, 2020 確認済みダウンロード (これは何ですか?)

    Very Best plugin

    ThreadModeler no longer works on Inventor 2021, is it possible to have an upgrade?


  • Best
    Scrablertt Scrablertt | 4月 09, 2020 確認済みダウンロード (これは何ですか?)

    Thanks a very useful addition. Please make support 2021

    Jjgolff Jjgolff | 4月 16, 2020

    Pasame tu correo electronico.

  • Só funciona em roscas feitas com o comando 'Rosca' em cilindros e furos, não funciona em roscas feito com o comando 'Furo'
    Airton Dos Santos Lima | 4月 01, 2020

    Muito bom o app mas é preciso corrigir este problema.

  • Should Be A Standard Plug-In
    Joseph Bongiorno | 1月 21, 2020 確認済みダウンロード (これは何ですか?)

    Works great and is easy to use. However, I would like to see additonal templates added besides ISO and BSW. I use this feature primairly to display threads on my stl files for 3D printing instead of manually making my threads. Definitley a time saver.

  • hen nb!
    | 11月 19, 2019 確認済みダウンロード (これは何ですか?)

    you juxing luowen gongju jiu geng hao le ( ̄▽ ̄)"

  • Works good
    Georgi Kalchev | 9月 04, 2019 確認済みダウンロード (これは何ですか?)

    It's very nice program. Works great with metric profile but I needed to make ISO trapezoidal tread and didn't recognise it.

    M P | 5月 22, 2019 確認済みダウンロード (これは何ですか?)

    Con Inventor 2019 lavora molto bene ottimo

  • not sufficient for 3d Printing
    Nathan Villines | 4月 15, 2019 確認済みダウンロード (これは何ですか?)

    Tried using this to easily 3D print something with male and female threads. Their modeler doesn't have any tolerance for male to female and did not work. 

    Joshua Yates | 12月 04, 2019

    This does work but you have to add in your own clearance, allow 0.3mm or more depending on your printer. For example if your external thread is on a shaft of 25mm, the internal hole for the thread diameter needs to begin at 25.3mm, then use the thread feature and the coolorange tool which would will a gap of 0.15mm all the way around. increase the gap until it works with your printer.

  • Inventor 2019.3
    Karel Cedivoda | 3月 07, 2019 確認済みダウンロード (これは何ですか?)

    Today I tried it in Inventor 2019. It function. For interior thread it is necessary to make the hole and thread have you make extra.

    Nice :)

  • Не для Чертежей
    Дмитро Паденко | 1月 11, 2019 確認済みダウンロード (これは何ですか?)

    Добрый день! Эта надстройка для тех, кто занимается графикой,  или на рендеринг конечной модели...для разработки КД не годится, не отображает в чертеже резьбу, а так штука интересная.

  • Good but could be so much better
    Kirk Arthur | 12月 05, 2018 確認済みダウンロード (これは何ですか?)

    Thanks for this useful app.... To bad Inventor does not give us the option to model the threads like Fusion360.  A few things could make it better, like... make it associative so that if I later change the thread size in the hole, the modeled thread feature also updates. Also, don't add the coil feature to a seperate solid.

    For those that want ANSI (UNF AND UNC) just use the ISO template.  It will give the correct thread model.

  • Awesome, but better if UNC, UNF thread included
    Zhifei Deng | 11月 12, 2018 確認済みダウンロード (これは何ですか?)

    At titled

  • Support of tapped holes?
    Ko-Keng Chang | 10月 02, 2018 確認済みダウンロード (これは何ですか?)

    Thank you for the useful tool.

    Is it popssible to turn tapped holes into modeled thread?

  • Very good, needs additional threads.
    Tony Macias | 8月 20, 2018 確認済みダウンロード (これは何ですか?)

    It would be great if UNC, UNF, and NPT thread forms were supported. This is the one improvement I can think of making.

  • Awesome...
    Sebastien Bolle | 6月 30, 2018 確認済みダウンロード (これは何ですか?)

    Except there is no support for ACME threads. I would love to see that added in a future release.

  • Muy bueno.
    Sebastian Lopez Rubio | 5月 30, 2018 確認済みダウンロード (これは何ですか?)

    Perfecto y fácil de usar

  • Wow this is amazing.
    Isaacrbeam Isaacrbeam | 5月 18, 2018 確認済みダウンロード (これは何ですか?)

    Very simple to use and amazing tool. Thanks for the development. Keep up the good work.

  • Maravilloso
    Danaes Arcos | 4月 23, 2018 確認済みダウンロード (これは何ですか?)

    Fácil de intslar y aplicar, Genial¡¡¡

  • Wonderful
    Jzhu | 3月 14, 2018 確認済みダウンロード (これは何ですか?)

    Thanks alot

  • Super
    Josef Novák | 3月 12, 2018 確認済みダウンロード (これは何ですか?)

    Perfektní appka :) .... Perfect app. THANK YOU very much :)

  • Exactly what I wanted from Inventor.
    Perrin Zahn | 1月 21, 2018 確認済みダウンロード (これは何ですか?)

    Amazing. The app is small, making it easy to download just about anywhere, the installation takes seconds, and the thread-converting process is intuitive and easy to do. I literally can't think of anything else I'd want from this add-on.

  • Great tool!
    Lars van der Wal | 1月 07, 2018 確認済みダウンロード (これは何ですか?)

    Use it for 3D printing. Thanks :-)

  • worked for small threads
    Fra | 12月 06, 2017 確認済みダウンロード (これは何ですか?)

    It actually worked great for a 3/8" nc thread, but did not work for a 7/16" nc thread.

  • good
    Ricardo Aleman | 11月 27, 2017 確認済みダウンロード (これは何ですか?)


  • Excellent Plug-in for 3d Prints
    Sotiris Katsikis | 11月 19, 2017 確認済みダウンロード (これは何ですか?)

    This is an excellent plugin to enable 3D printing of threads.

  • Great for 3d printing
    Michael Berna | 10月 23, 2017 確認済みダウンロード (これは何ですか?)

    I use this for converting the built in thread representations to 3d printable objects. This saves me a lot of time and ensures an accurate thread.

  • Perfect idea and very decent plug-in.
    晓晗 | 10月 13, 2017 確認済みダウンロード (これは何ですか?)

    I like it and I support your plug-in and YouTube channel. By the way, I'm Chinese. LoL

  • Would be a nice app
    J. H. | 10月 03, 2017 確認済みダウンロード (これは何ですか?)

    If you only use metric threads it would be a nice app, but threads for Pipes (Withworth) is not implemented yet. Even tough there is a template named BSW it is sketched with 60° not 55°. Of course this is changed fast, but I didn't get the thread with right inner dimension (for G3/4 around 23.7 instead of real-hole 24.5). So useless for 3D-Printing, only suitable for representation. Instead of lossing further time it's maybe better to generate his own ifeature... Good approach, would be nice to continiue to make it suitable for 3D-Printing even with pipe-threads or trapezoidal threads. Nevertheless, thanks for your work ;-)

  • Thread annotation
    Katarina Goreta | 9月 25, 2017 確認済みダウンロード (これは何ですか?)

    how to annotate this thread in drawing for machine operator, I tried but wont let me to annotate!?

  • WOW! Works Great
    Murphy | 8月 17, 2017 確認済みダウンロード (これは何ですか?)

    Click on the tool. Click on the tread file and boom! Saved me a lot of time instead of doing it manually.

  • 3d Printing
    Iain Mcmurray | 8月 16, 2017 確認済みダウンロード (これは何ですか?)

    Amazing and simple to use. Perfect for setting up my models for 3d Printing when I need threads.

  • Perfect!!!
    Johann Hepp | 8月 10, 2017 確認済みダウンロード (これは何ですか?)

    Works better than expected. Relieve the work. Thank you!

  • Great tool
    Brad Headlam | 8月 08, 2017 確認済みダウンロード (これは何ですか?)

    Time saver if you need to fully model the thread. Only downside is creates large file size, but still great.

  • Works good, a few issues
    Frank Okipnak | 8月 04, 2017 確認済みダウンロード (これは何ですか?)

    As everyone else is saying, great for the most part, just needs to be refined so can do more thread styles as well as holes properly. Otherwise, very handy and cool. The error I get the most is "Failed, try with a bigger pitch offset value", no matter what I try, does not work.

  • Super
    Sule Wad | 8月 01, 2017 確認済みダウンロード (これは何ですか?)

    A great Tool

  • Hoze
    Jozsef Sallai | 7月 29, 2017 確認済みダウンロード (これは何ですか?)

    Hi there, As others have already thanked I also want to do: Thank you guys!

  • easy app to use
    Julian Shepherd | 7月 13, 2017 確認済みダウンロード (これは何ですか?)

    really easy to use great results .

  • Works good
    Vinck | 6月 26, 2017 確認済みダウンロード (これは何ですか?)

    It does what's supposeed to do. Nothing more. Nothing less.

  • Excelente!
    Luis Carlos Vega Renteria | 6月 25, 2017 確認済みダウンロード (これは何ですか?)

    Muy buena aplicacion! Yo te sugiero que hagas un pequeño tutorial de como hacer roscas para NPT ya que creo que nadie sabe como hacerlo. Gracias

  • good
    | 6月 12, 2017 確認済みダウンロード (これは何ですか?)

    it works very good,especially for 3D print.Thank you!

  • Straightforward and Effective
    Jonathan Bazak | 6月 09, 2017 確認済みダウンロード (これは何ですか?)

    Does exactly what I needed it to do: make matching 3d-printable threads on holes and surfaces with just a handful of clicks. Support for more non-standard ISO metric threads would be cool, but there are plenty here as-is. Very handy extension to have!

  • good
    Waiman Liu | 6月 06, 2017 確認済みダウンロード (これは何ですか?)

    very good. i can 3d print many gears now !!

  • Absolutely amazing
    Giacomo Brugnolo | 5月 24, 2017 確認済みダウンロード (これは何ですか?)

    Very useful for 3d printing and making your components look absolutely better!

  • Awesome
    Ricardo Fernandez Saavedra | 5月 15, 2017 確認済みダウンロード (これは何ですか?)

    Works perfectly! Thank you!

  • Can't be used with .idw callouts
    Douglas Reiland | 5月 14, 2017 確認済みダウンロード (これは何ですか?)

    The downloading and aesthetics of threadModeler are fine, but, unfortunately, this application is not compatible with .idw drawings. Inventor does not recognize the threadModeler modifications to the .ipt, therefore they cannot be called out with hole/thread specifications on drawings. I submitted this to coolOrange tech support. They acknowledged that this was a problem and acted as though this was the first time anyone raised this issue with them.

    Daniel Gamarra | 4月 30, 2017 確認済みダウンロード (これは何ですか?)

    I downloaded the plugin. The installation was successful but i can't see the app in the ribbon. Is it working in version 2018??

  • Worked perfect so far
    Simon Roth | 4月 27, 2017 確認済みダウンロード (これは何ですか?)

    Had no problems with it, created perfect threads for 3d printing. Thank you

  • Very Useful
    Jordan Coquoz | 4月 18, 2017 確認済みダウンロード (これは何ですか?)

    I don"t normally rate things but I wanted to give this five stars because of how amazingly useful this is. Huge thanks to the developers of this tool.

  • Cool so far
    Engineer Draft | 4月 12, 2017 確認済みダウンロード (これは何ですか?)

    Have used it once where I wanted to really expose thread on a drawing, so that immediate clarification would happen. Worked well and was happy, good in context of time saving for those one off type jobs.

  • Works well for me
    Jonathan Colella | 4月 10, 2017 確認済みダウンロード (これは何ですか?)

    No hassle, as advertised

  • Great app needs a few tweeks
    ROGER HOOKER | 3月 29, 2017 確認済みダウンロード (これは何ですか?)

    it's very responsive, however it's difficult to champher and seemingly impossible to extrude through.

    | 6月 13, 2019

    did you get any solution for this?

  • Version 2020
    Rodolfo Ramos Castelo Branco | 6月 18, 2015 確認済みダウンロード (これは何ですか?)

    Good afternoon, for the 2020 version, is it already under development? Thank you