Drawing Porter

Digitally signed app



Drawing Porter is a batch print and export tool for Autodesk® Inventor®. What makes it unique is that its Assembly focussed or based and that it will determine which drawings and parts are relevant based on the single assembly file you select.


So if you select your GA for instance, the app will automatically know which parts and drawings form part of that design. You can then batch print or export your drawings and/or models to various formats including PDF. DWG, SAT and STEP.


Note: This app uses a custom installer and not the Autodesk App Store standard installer.


バージョン 5.0.0, 2024/05/23
What's New: <5.0.0> - [New] Inventor 2025 Compatibility <4.0.0> - [New] Inventor 2024 Compatibility <3.0.0> - [New] Inventor 2023 Compatibility <2.17.0> - [New] Added the option to export Drawings to DXF. <2.15.0> - [New] Inventor 2022 Compatibility -- Only supports Inventor 2017 to 2022 <2.13.0> - [Fix] Option for drawing to be updated before printing also. <2.12.0> - [New] Added option for drawing to be updated before processed. -- This option can be enabled under Settings <2.11.0> - Added Inventor 2021 Support <2.10.0> - Added Inventor 2020 Support


カスタマ レビュー

72 件のレビュー
テクニカル ヘルプを表示
  • Great Tool
    Sandeep Gummita | 5月 15, 2024 確認済みダウンロード (これは何ですか?)

    It would've been really good if the converted files stored in the same folder as the idw / dwg files browsed from.

  • Set the export folder
    George Cudalb | 4月 11, 2024 確認済みダウンロード (これは何ですか?)

    For future is beter to have  option to export automatically pdf and dwg file in the same folder where the idw file are placed.

  • Export STEP PDF
    DIMITRIOS MPEKOS | 2月 07, 2024

    Hello, thanks for this great app!! A noticeable correction would be to export assemblies to step files also 

  • Must have for printing/exporting multiple drawings
    any thing | 11月 02, 2023 確認済みダウンロード (これは何ですか?)

    Exporting and multiple drawings is made easy with this app. after setup all you do is select your IDW files and press print or export. it saves me so much time and effort as i often have around 10 drawings to export to pdf and dwg, and before that i like to print and check them. this app makes printing them all a 1 click operation and then export is just 1 more click. cant recommend enough, half my office already uses it.

  • Excellent application
    Ricardo Sebastián | 7月 14, 2023 確認済みダウンロード (これは何ですか?)


    A must have application for Autodesk Inventor, much better than the task scheduler that comes built in.

    I wanted to make a proposal for the following versions, in the options panel, if I select pdf printing, dwg and dxf creation, along with stp format.When generating the files the application, can it generate the folders, pdf, dwg,dxf and stp and insert the files of each type in the folders?

    Thank you very much


  • Printing options are a little funky
    Luke Fenske | 6月 20, 2023 確認済みダウンロード (これは何ですか?)

    As far as I coudl tell it will default to front to back printing if your printer is able. Personally I need one side printing.

  • Great tme saver.
    Len Krenzler | 5月 09, 2023 確認済みダウンロード (これは何ですか?)

    This is a very handy tool since Inventor doesn't remember where you want to save PDF's.  Thanks for this!

    Pieter van der Westhuizen (公開元) | 5月 11, 2023

    Thanks for the great review!

    İsmail İHTİYAR | 9月 21, 2023

    Is it posiable to print a3 or can app seperate a4 to a3 ?

  • Export error Inventor2024
    Tobias Titz | 5月 08, 2023 確認済みダウンロード (これは何ですか?)

    Programm is still not working with Inventor 2024 for export dxf and pdf files. Idw-files are found, can be printed. Export to dxf and pdf does not work.

    Pieter van der Westhuizen (公開元) | 5月 09, 2023

    Hi please contact me with the provided email address in the app.

  • Good app!!
    michele de luca | 5月 03, 2023

    good app, i would like to suggest a possible improvement

    multicore processing:

    i notice the app when processing start holds 1 Inventor, so basically it works as single core. it would be nice to split the work into multiple inventor processes, if you have 8cores it will open 8 inventor processes and split the work.


    Pieter van der Westhuizen (公開元) | 5月 04, 2023

    Thank you. Thanks for the suggestion also.

  • Incredible
    Bill Doney | 5月 03, 2023 確認済みダウンロード (これは何ですか?)

    Such a easy tool to use and so effective. Thank you

    Pieter van der Westhuizen (公開元) | 5月 04, 2023

    Thank you.

  • Good Software
    Gerald Kevin Cruz | 4月 06, 2023 確認済みダウンロード (これは何ですか?)

    When can we have the Inventor 2024 compatibility update?


  • Very Useful
    Axel Lopez | 1月 10, 2023 確認済みダウンロード (これは何ですか?)

    Should honestly be a feature in the official release already.


    Update: It'd be nice if you could rearrange drawings in the export queue, or at least a sort feature.

    Pieter van der Westhuizen (公開元) | 1月 11, 2023

    Thanks for the great review!

  • Works and that what matters
    Daniel Šíma | 11月 18, 2022 確認済みダウンロード (これは何ですか?)

    Thank you, this is a very useful app.

    Pieter van der Westhuizen (公開元) | 11月 18, 2022

    Hi Daniel thanks for the great review!

  • Great help, but please make it better!
    Helder Farinha | 5月 02, 2022 確認済みダウンロード (これは何ですか?)

    - It should allow to make the window bigger or let us read the total path for each dwg in order to know each one to select to be exported or deleted (home window).

    - Same thing for the Printer selection combobox. I cant read the entire description, not allowing me to read/select the printer I want to select (options menu window).



    Pieter van der Westhuizen (公開元) | 5月 10, 2022

    Thanks for the feedback. We will look at improving the interface to cater for that.

  • Excellent app, minor question
    Jura Tomorad | 11月 13, 2021 確認済みダウンロード (これは何ですか?)

    Great application, saves a lot of time when converting a large number of drawings to pdf. However, i don't understand how to export to dwg. It says "select DWG export INI file - (select the export settings INI file to be used when exporting dwg files. This file can be created using Inventor's export options dialogue". Please help and provide more detailed instructions if possible. Thank you in advance!

    Pieter van der Westhuizen (公開元) | 11月 15, 2021

    Thank you for the great rating. Please email me: ivtools@mgfx.co.za

  • File export type
    Glenn Allen | 10月 04, 2021

    Is there a way to have the dxf and dwf files exported as well?  I have several clients that use those and not dwg.

  • Well done
    Bạch Dương | 5月 27, 2021 確認済みダウンロード (これは何ですか?)

    Good app! But can you add sort list of drawing by revision number or custom iproperties. Thanks.

  • Almost perfect
    Balázs Káplár | 5月 19, 2021 確認済みダウンロード (これは何ですか?)

    The program saves a lot of time. However that time saved is wasted when deleting the "_ [1]" extensions on the step files. It's getting really annoying especially when the whole project is exported and later on we need to change some things on a file, in that case the inventor exported file name differs from the drawing porter version and sadly Edgecam can't pair the mismatching file names to the CNC program.

    The default step and pdf name should match the inventor .ipt name. Also there could be an option to set a different file naming default for others who don't use the inventor names.

    Pieter van der Westhuizen (公開元) | 5月 24, 2021

    Please email me: ivtools@mgfx.co.za

  • Great tool
    P. Vries | 3月 17, 2021 確認済みダウンロード (これは何ですか?)

    Works very easy and good! The only thing i noticed is that it is quite slow in 2021, that should be improved.

    吴 仕贵 | 4月 14, 2021

    When will the 2022 version be compatible?

    Federico Scaioli | 4月 28, 2021

    Hellò; just a little trick to get program go faster: after put idw in DP window and start process open INV2021 in a window. While program is running just resize INV2021 window with the mouse.. process will go ahead each resizing... I don't know why it works but it works... ;-)

    P. Vries | 5月 06, 2021

    Yes it works faster, thanks! Great tool, only i noticed the software can plot an old image of the drawing (when part had been renamed) so be carefull!

  • Revision Number addition
    Ken Peakman | 2月 13, 2021 確認済みダウンロード (これは何ですか?)

    It would be great if drawing porter could give you an option to add the revision to the drawing number such as -r1.


    Pieter van der Westhuizen (公開元) | 2月 15, 2021

    Our app AutoDRAW can do that.

  • Works great!
    Argjend Bresa | 1月 25, 2021 確認済みダウンロード (これは何ですか?)

    It works great and saved me a lot of time! 

    It would be a big plus if it could convert to DXF format too!

  • Works great But how do I print files to A3?
    Jason Sutherland | 12月 02, 2020 確認済みダウンロード (これは何ですか?)

    Only prints to a4 cant see a size option for in the settings?

    İsmail İHTİYAR | 9月 21, 2023


  • Time saver
    Craig Fraser | 11月 10, 2020 確認済みダウンロード (これは何ですか?)

    Thanks for this amazing app, it saves so much time compared to opening files and exporting.


    One thing I'd like to see is 'find all' dwg/idw from a directory, including sub folders. We uses a lot of folders/subfolders to keep things organised, but can be tedious to enter each folder and add drawings manually. A one click button to add all found drawings under a directory path would be awesome.

    Pieter van der Westhuizen (公開元) | 11月 12, 2020

    Thank you we will add it in the next version.

  • utile....ma la compatibilità 2021??
    Marco Soriani | 10月 09, 2020 確認済みダウンロード (これは何ですか?)

    Utilissima, ma ancora non c'è una alternativa se hai la 2021

  • non compatibile con 2021
    UT5 Gucon | 10月 04, 2020 確認済みダウンロード (これは何ですか?)

    Utilissima, ma ancora non c'è una alternativa se hai la 2021...


  • 2021 버젼
    조원 심 | 8月 18, 2020

    지원은 언제부터 될까요???

  • 2021 Support
    Stamatis Vlachos | 5月 11, 2020 確認済みダウンロード (これは何ですか?)

    i need to know when the 2021 support is published.

  • Great timesaver
    Jeffrey Koomen | 3月 13, 2020 確認済みダウンロード (これは何ですか?)

    Using it to export pdf,dwg and step files.

    Question: Is it possible to export assembly's also in step format? 

    Pieter van der Westhuizen (公開元) | 5月 12, 2020

    Hi sorry, not at the moment.

  • Love the app!
    Lasse Moe | 1月 13, 2020 確認済みダウンロード (これは何ですか?)

    it was really easy to use for my purpose! But since im using Vault, its has some integration issues. But for me its ok. Only thing im missing is the possibility to drag and drop drawings? instead of searching the up. Possible to add that? 

    Pieter van der Westhuizen (公開元) | 1月 14, 2020

    Hi Lasse, Thanks for the feedback and the feature request. Its a great idea and we will look into it.

  • Great Little app but needs some more options
    Michael Holden-Jones | 12月 19, 2019 確認済みダウンロード (これは何ですか?)

    I've just downloaded and used this for the first time and I have to say its a great little app. I'd like to see the addition of a prefix or suffix option based on iProperties i.e. adding in the drawing revision number as a suffix would be a big big plus for me. 


    Good work and well worth using.


    Pieter van der Westhuizen (公開元) | 12月 20, 2019

    Hi Mike, Thanks for your feedback!

  • Huge time saver
    Marijn Broos | 7月 17, 2019 確認済みダウンロード (これは何ですか?)


    We have machines that consists of several hundred drawings. With this app I cannot go back to manually plotting pdf's.  Good app, easy to use. 

    Pieter van der Westhuizen (公開元) | 7月 17, 2019

    Thanks for the kind words!

  • Very useful app
    Andrea Cattaneo | 5月 16, 2019 確認済みダウンロード (これは何ですか?)

    First of all great app! I would like just to add an advice, is it possible to update the drawing before to print/generate pdf and so on? Drawing porter at the moment print the dwg without cheking if the file is updated with the model, then can create some troubles...

    Pieter van der Westhuizen (公開元) | 5月 16, 2019

    Thanks for the good review and feedback. We are working on an option to update the drawing prior to printing.

    Jeffrey Koomen | 3月 13, 2020

    That would be very helpfull. If drawings are updated before generate pdf. I was not aware of this, and i sended to my client out-dated drawings. So i had to run an update design task with taskmanager. But it takes long.

  • I. Love.This. App!
    James White | 3月 22, 2019 確認済みダウンロード (これは何ですか?)

    Other reviewers have done a better job than i can. Suffice to say it's an awesome free app that does just what i need.

    Also before you "Find All idw's" or the other thing make sure you do a Rebuild All on whatever assembly your using. Without doing this i have found it may grab older parts no longer associated with the assmbly. This is NOT a criticism lol.

    FYI, i use it for creating a drawing pack in one pdf (combine pdfs). Myself and the project manager like being able to flip through all the drawings with one pdf.


    Pieter van der Westhuizen (公開元) | 3月 28, 2019

    Thanks for the kind words. We will be redoing the app soon with loads of new features.

  • Very Great App
    Muchlis Eko | 3月 15, 2019 確認済みダウンロード (これは何ですか?)

    This app really help me to produce drawing pack for my job

    Pieter van der Westhuizen (公開元) | 3月 28, 2019

    Thats great to hear!

  • Excellent For Inventor Drawings
    Jason Rugg | 2月 11, 2019 確認済みダウンロード (これは何ですか?)

    Drawing Porter is excellent for Inventor Drawings, would like to see the added ability to perform the same functions on AutoCAD Drawings. Have reached out to support a few times but emails keep getting returned as undeliverable so this is also an attempt to reach support.

    Pieter van der Westhuizen (公開元) | 2月 12, 2019

    Hi Jason, Thank for the great review. You can contact me on ivtools(at)mgfx(dot)co(dot)za

  • It works and it is free what more could you ask for?!
    Nate Miller | 1月 04, 2019 確認済みダウンロード (これは何ですか?)

    Just saved 4 hours of my life

    Pieter van der Westhuizen (公開元) | 1月 10, 2019

    Thanks for the kind words and good review!

  • 100 x thanks!
    Alen Cmrecki | 1月 03, 2019 確認済みダウンロード (これは何ですか?)

    Very useful aplication, it should be a long time ago by default instaled in Inventor. thanks a lot.

    Save a lot of time.

    I have problem with export to dwg - hatch is not exported?!

    Somebody else with same problem in Inventor 2019 Pro?  


    Update: 05.2021

    Please add an option to exclude drawings for "BOM reference parts" from export. 

    It make a lots of problems.

    We have a many subassemblyes which are only BOM"reference" in a given assembly. 

    When seraching for drawings, Drawing Porter picks up also drawings for referenced parts, which are actually not needed in given assembly. 

     Drawing porter 2.13 /  Inventor 2021. 

    Thanks in advance.

    Pieter van der Westhuizen (公開元) | 1月 10, 2019

    Please email me a sample drawing and model so I can test on my side.

  • Incredible App!
    Jan Supersaxo | 11月 06, 2018 確認済みダウンロード (これは何ですか?)

    App works great and saves a lot of time. Two more options would be fantastic if they were integrated:

    1. Export other file formats like PARASOLID *.X_T

    2. map sheet sizes to various print paper sizes on different printers. Thanks for the great work!

    Pieter van der Westhuizen (公開元) | 11月 08, 2018

    Thanks for your feedback. Your comments are noted.

  • Excellent!
    Sverre Kraggerud | 10月 17, 2018 確認済みダウンロード (これは何ですか?)

    Saves me for a lot of time

    Pieter van der Westhuizen (公開元) | 11月 08, 2018

    Thanks for your feedback! :)

  • Excellent app!!
    Amir Dirbaz | 10月 12, 2018 確認済みダウンロード (これは何ですか?)

    Hi, I would like to know whether it is possible to have all drawings to a single PDF document ?

    Pieter van der Westhuizen (公開元) | 10月 16, 2018

    Hi thanks for the good rating. Currently thats not an option sorry.

  • An extremely useful and for me a necessary tool
    Steven Connell | 8月 31, 2018 確認済みダウンロード (これは何ですか?)

    This is by the most useful free I use for Inventor. This is perfect for exporting an assembly drawing or PDF pack to an external manufacturer.

    One feature I would like if it wasn't much troublt to add would be to drag and drop files to open, instead of opening a seperate explorer window to navigate to the files you want to add.

  • Super App
    Skender Mujanovic | 7月 26, 2018 確認済みダウンロード (これは何ですか?)

    Funktioniert einwandfrei und spart eine menge Zeit. Danke

  • Time saver
    Matteo Livraghi | 6月 04, 2018 確認済みダウンロード (これは何ですか?)

    Perfect time saver, but can only pick up drawings from C: so this results pratically useless for users that works with Vault, this options will be available in the future? Vey good work, anyway. 

  • Great app
    Jeremy Van Buskirk | 5月 21, 2018 確認済みダウンロード (これは何ですか?)

    It has really cut down the time spent printing. I am looking into the possibility of an adsk of rfa export option to cut down on our 3D model conersion. We are useing both revit and inventor and this would help quite a bit.

    Pieter van der Westhuizen (公開元) | 5月 22, 2018

    Hi Jeremy, Thanks for the good review. You can email me on ivtools@mgfx.co.za to discuss your requirement a bit further.

  • Needs 2019 compatibility
    Edgaras Rutkauskas | 5月 16, 2018

    Time saver!

    Pieter van der Westhuizen (公開元) | 5月 17, 2018

    Will upload it shortly. In the meantime you can also get it here: https://onedrive.live.com/redir?resid=27102124B84C7E34!3357&;authkey=!AFJrJN-BG_VOL5c&ithint=folder%2c

  • Doskonała aplikacja
    Łukasz Kaczyński | 3月 13, 2018 確認済みダウンロード (これは何ですか?)

    Aplikacja bardzo przyspiesza pracę.

    Pieter van der Westhuizen (公開元) | 5月 17, 2018

    Thanks for the good feedback!

  • Amazing time-saver!
    Hendrik Du Preez | 2月 06, 2018 確認済みダウンロード (これは何ですか?)

    I really love the fact that the App automatically picks up what page size and orientation the idw is even if you do different sizes and orientations at the same time. Dankie Pieter!

    Pieter van der Westhuizen (公開元) | 2月 07, 2018

    Dankie Hendrik! I am glad the tool comes in handy.

  • Finally!
    Jon Genova | 11月 10, 2017 確認済みダウンロード (これは何ですか?)

    This batch app saves hours of my time. Developer, Thank you!!

    Pieter van der Westhuizen (公開元) | 11月 13, 2017

    Good to hear. Thanks for the feedback.

  • Fantastic
    Steve Griffiths | 8月 12, 2017 確認済みダウンロード (これは何ですか?)

    I've just used this on a couple of top level assemblies and it worked flawlessly for printing out a folder of pdf's, ready for combining. My God, this is going to save me so much time - thank you very, very much for your time and effort !

    Pieter van der Westhuizen (公開元) | 10月 19, 2017

    Hi I am glad it can help you. Thanks for your review!

  • Perfect!
    Gerry Beylerian | 7月 20, 2017 確認済みダウンロード (これは何ですか?)

    Does exactly what it says it does! Thank you very much!

    Pieter van der Westhuizen (公開元) | 10月 19, 2017

    Its only a pleasure! :)

  • Prefect app!
    Paul Keizer | 5月 30, 2017 確認済みダウンロード (これは何ですか?)

    I love this app! When will Inventor 2018 be supported?

    Pieter van der Westhuizen (公開元) | 5月 31, 2017

    Hi Paul. Thanks for the kind words and review! The new version can be downloaded here for now: https://onedrive.live.com/redir?resid=27102124B84C7E34!3357&;authkey=!AFJrJN-BG_VOL5c&ithint=folder%2c I will also publish it to the Autodesk App store later today. Pieter

    Alex Dall'Agnol | 4月 03, 2017 確認済みダウンロード (これは何ですか?)

    I used this app and I think it is very well builded. I think it as also a lot of potential that can be implemented. Good job!

    Pieter van der Westhuizen (公開元) | 4月 04, 2017

    Hi Alex, Thanks for the kind words. It's much appreciated. If you have some ideas for new functionality please email them to me. My email address is above in the app details. This offer actually goes to anyone. We are in the process of rewriting the app and would like to hear from the users. Thanks

  • Time saving apps
    Pascal David | 2月 14, 2017 確認済みダウンロード (これは何ですか?)

    Works great and after the top service this is also an time saver to keep :)

    Pieter van der Westhuizen (公開元) | 2月 15, 2017

    Thanks for the kind words Pascal!

  • Thank you!
    Anthony Young | 11月 30, 2016 確認済みダウンロード (これは何ですか?)

    This program is great, some quirks i found with up-updated drawings, but that was a simple find/solve. Thank you, how can I support you?

    Pieter van der Westhuizen (公開元) | 12月 01, 2016

    Thanks for the kind words and good review. It's much appreciated. We are in the process of rewriting Drawing Porter to include all the features everyone has requested. To support us give us some feedback via email (ivtools@mgfx.co.za) to make the application even better. Cheers!

  • Thank you very much..
    Tufan Eliar | 11月 17, 2016

    The only problem for me low resolution icon :) It looks pixelated on darker backgrounds. I will create a svg version of your aps's icon and will convert it ico to replace shortcut's icon.

    Pieter van der Westhuizen (公開元) | 11月 17, 2016

    Hi thanks for the feedback. Yes the whole app is actually a bit dated and we are actually in the process of rewriting it from scratch. The icon will also be updated.

  • Inventor close the Idv -files when I print to Pdf
    Lennart Petterson | 11月 02, 2016 確認済みダウンロード (これは何ですか?)

    Hi I downloaded Drawing Porter today and it is a very good help for me but there are some things I wonder about. 1. When I write to PDF so will my IDW files closing in Inventor. Is there any setting? I open files from C: 2. Can I open files from the Vault with Drawing Porter I use Inventor/Vault 2017 Best Regards from Lennart

    Pieter van der Westhuizen (公開元) | 11月 17, 2016

    Hi we are in the process of rewriting the app from scratch. We have made note of your suggestions and will incorporate them into the new version.

  • It was great ....but
    Norbert Maslak | 8月 11, 2016 確認済みダウンロード (これは何ですか?)

    Hey there, when i was working on previous system (win7) it was working great, but now, on W10 it only showing error (cannot export to step/pdf/dwg). Do you have any idea why is that ?

    Pieter van der Westhuizen (公開元) | 8月 18, 2016

    Hi, I sent you an email. Lets chat about the error offline ok.

    Norbert Maslak | 10月 18, 2017

    After the update the is no more problem with exporting. Yet i have a question. Is there an option to change default STEP filename ? I usually get things such as "<modelname> _ [1]" how can i get rid of the brackets and one ? Big Thanks :)

  • Helpful App - DXF export missing
    Burkhard Santner | 8月 09, 2016 確認済みダウンロード (これは何ですか?)

    As John Hygelund in 2014 wrote, I'm missing DXF export too. Most of my manufacturers can't read DWG files but DXF. In 2014 you put this on your list. Any idea when you can include it? Greets Burkhard

    Pieter van der Westhuizen (公開元) | 8月 18, 2016

    Hi is this for exporting sheet metal flat pattern information? If so we have a different product which handles that called DXF Exporter. Let me know ok.

    Burkhard Santner | 8月 19, 2016

    Hi Pieter, thank you for your reply. I need DXF export for some manufacturers, working for my customer. They get the drawings of all parts and assemblies to be manufactured in DXF, as they do not have a DWG reader to extract the geometric data. Normally I never export flat pattern DXF data. Burkhard

  • Great Concept, Bug Issues
    Timothy Boutchyard | 8月 01, 2016 確認済みダウンロード (これは何ですか?)

    This is a great idea and concept and seems to work fairly well. Printing is my issue. Print and Export Options dialog box has no done button...cannot print 11x17 drawings even when Inventor settings are 11x17.

    Pieter van der Westhuizen (公開元) | 8月 02, 2016

    Hi yes we are aware of this issue and will be releasing a new version shortly which will cater for this. A workaround is to set your Windows screen scaling back to the default 100%. The buttons will show up as normal then.

  • Multi sheet drawings?
    MICHAEL BRAINARD | 7月 20, 2016 確認済みダウンロード (これは何ですか?)

    Is there a setting that will allow for all sheets in a multi sheet drawing to be exported?

  • 4
    Pim De Rue | 4月 15, 2016 確認済みダウンロード (これは何ですか?)

    Very nice and handy program. It does a lot, also closes your active Inventor session! It doesn't create .step files from assembly's. And doesn't give the .step file the right name if it's a derived/mirrored part.

    Pieter van der Westhuizen (公開元) | 4月 18, 2016

    Hi Pim, Thanks for the reply. We appreciate constructive comments like this and we will look into the issue of .step file names. As for not creating step files for the assembly files, that is an intended feature but we will look at adding an option to also include assembly files. Thanks.

  • Great app... almost...
    Stephen McCarthy | 10月 07, 2015

    We have had some issues with the app not finding existing drawings. This usually occurs for drawings that are fed by iParts/iAssemblies. Any idea why this is happening? Also, we would like the option to extract the part# from the idw and use it to name the printed copy. Any chance of that happening? Thanks for the all of the good work!

    Pieter van der Westhuizen (公開元) | 10月 08, 2015

    Hi Stephen, Thanks for the feedback. We have added this to our list of requests and will look into it.

  • Great program + Improvement Suggestion
    Christofer Wiik | 6月 03, 2015

    Great program. Has helped me on my projects when batch exporting all drawings to PDF. I suggest making the "log" of drawings created available as a text/excel file (or atleast possible to copy paste manually into one). This will ease the creation of project "drawing lists".

    Pieter van der Westhuizen (公開元) | 6月 03, 2015

    Hi Christofer, Thanks for the feedback. That feature has already been suggested by another user and we will integrate it soon. Check back for updates in the next few weeks.

  • helpful
    Claudio Alossa | 3月 25, 2015 確認済みダウンロード (これは何ですか?)

    great app for free!

  • The mechanics are great
    Pierre Marcotte | 2月 12, 2015 確認済みダウンロード (これは何ですか?)

    The add-in does exactly what it says it does. My only problem is that our file structure is not optimal for the way this add-in searches for files, and it takes upwards of 6 minutes to find 12 drawings (in a specific case)! Other than that, I love it.

  • Works well as .pdf batch plot
    Larry Marshall | 2月 09, 2015 確認済みダウンロード (これは何ですか?)

    Needed a way to batch plot (export) several hundred .idws to .pdf. Worked well for my purposes.

  • So Close!
    Jordan Kelly | 9月 16, 2014 確認済みダウンロード (これは何ですか?)

    The only option missing on this is the ability to add a suffix or prefix to the file name on the PDFs.

  • Hoping for more export options?
    John Hygelund | 8月 14, 2014 確認済みダウンロード (これは何ですか?)

    This is almost exactly what I've been looking for. I was able to export both pdf and stp files from a large assembly, although not in the same export. I had to do 2d and 3d in a separate step. I also need to export .dxf rather than .dwg and .igs rather then .stp. Any change those options can be included?? Very nice app! Thank you.

    Pieter van der Westhuizen (公開元) | 8月 15, 2014

    Hi John, Thanks for the review. I have added your request to the list of future improvements.

  • PDF ok DWG not working
    Olle Munck | 7月 03, 2014 確認済みダウンロード (これは何ですか?)

    Print to PDF works fine. But printing to DWG makes Inventor to crash. I'm using Inventor 2015 on Windows 7 win64.

  • Ok, but limited
    Sam Houston | 6月 03, 2014 確認済みダウンロード (これは何ですか?)

    Why doesn't this work for Inventor DWG's as well?

    Pieter van der Westhuizen (公開元) | 7月 04, 2014

    Hi Sam. We are busy with the DWG compatibility so watch this space as it should be done shortly.

  • Could be better!
    Dries Baron | 4月 23, 2014 確認済みダウンロード (これは何ですか?)

    When using it on a assembly of about 30 parts, it takes ages gathering all the parts. And then it's still missing some referencing IDW, while they are on my harddrive. I'm using Vault.

    Pieter van der Westhuizen (公開元) | 7月 04, 2014

    Hi Dries, Thanks for the feedback. We are in the process of addressing this issue and to make it more logical for users to understand how Drawing Porter is searching for referencing drawing files.

  • Excellent app!!
    Michael Stalter | 2月 26, 2014 確認済みダウンロード (これは何ですか?)

    Had trouble getting app to work, contacted customer support and within a day received a response from Pieter and a zip file which I unzipped and installed. App works Great now!! We batch print alot of assembly and detail drawings for the shop and this app drastically cuts the search time involved. With the export feature, I can save those drawing lists for later printing AND IT'S FREE!! Did I mention...IT"S FREE!!