threadModeler

Digitally signed app

Bezpłatna
System operacyjny:
Język:

Opis

The threadModeler tool has been developed to allow Autodesk® Inventor® users to generate a realistic modeled equivalent thread based on an existing Inventor thread feature. Users are able to select an existing thread feature in the model, which the threadModeler then converts to a realistic 3D modeled thread based on the underlying thread feature properties.

Modeled threads are generated saving a lot of time and effort for the user when compared with a manual approach, bringing a higher degree of realism to your models.

 

*********************************************************************************************************************

Unfortunately, threadModeler is discontinued and is not compatible with Inventor 2023.

The last version of threadModeler is compatible with Inventor 2018, 2019 and 2020.

We also released an online version which you can find it on https://threadmodeler.com.

 

Please use the online version for Inventor versions newer than Inventor 2020.

*********************************************************************************************************************

Informacje na temat tej wersji

Wersja 19.0.8, 08.02.2023
Support of Inventor 2020 ********************************************************************************************************************************************* Note: coolOrange will not further develop the app or provide new versions for newer Inventor versions. The threadModeler for Inventor 2020 is the last version, which is published here. We reserve the right to remove the App from the Autodesk App Store at any time. Instead we provide a online version of the threadModeler: http://www.threadmodeler.com/home Please try this version for newer Inventor versions. *********************************************************************************************************************************************

Zrzuty ekranu i nagrania wideo


Recenzje klientów

199 recenzje
Pomoc techniczna
  • WORKS IN 2024 WITH THIS METHOD
    Phoebe Lewis | grudnia 10, 2024 Sprawdzone pobranie (Co to jest?)

    Taken from reddit user Imaginary_Phone_1785:

    the CoolOrange app will work with all newer versions of Inventor including 2024. You just need to make a slight change to a text file to get it working again. Follow the following steps and it will work for you.

    Install the app from Apps and then navigate to the c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\ folder. In Notepad, open the PackageContents.xml file and edit the string SeriesMax="Ir24" to SeriesMax="Ir30". Save the file.

    Now, in the Contents subfolder, open the coolOrange.ThreadModeler.Inventor.addin file in Notepad and delete the line 11 with the parameter SupportedSoftwareVersionSmallerThan. Save the file again.

    Now run Inventor. In the Tools > Options > Add-ins ribbon, open the dialog and unlock and load the coolorange-ThreadModeler plugin.

    https://www.reddit.com/r/AutodeskInventor/comments/145aff2/comment/kra6drv/?utm_source=share&;utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button


  • 怎么安装呢,安装完,在附加模块上找不到
    lingpeng su | maja 31, 2024 Sprawdzone pobranie (Co to jest?)

    这个是怎么回事呢

    三斤 张 | sierpnia 14, 2024

    要改一下


  • GREAT!!!!1
    William Hernandez | kwietnia 30, 2024 Sprawdzone pobranie (Co to jest?)

    Muy buen trabajo!


  • Dissapointing
    Mindcode Mindcode | grudnia 07, 2023 Sprawdzone pobranie (Co to jest?)

    Come on make it 2023

     

    Adrián Jiménez | stycznia 11, 2024

    +1

    alexander böttcher | kwietnia 12, 2024

    +1


  • Good app
    Binh Pham | września 30, 2023 Sprawdzone pobranie (Co to jest?)

    thật tuyệt khi sử dụng để không phải thấy hình dạng ren nhàm chán. Cảm ơn


  • why discontinue when you can make a default item?
    Bart Mariani | lutego 12, 2023 Sprawdzone pobranie (Co to jest?)

    Modeled threads should be a selectable option when adding threads! They should also retain the thread information as the non-modelled threads do!!!!!!

    Love the app, still want the functionality in 2021 and beyond without an upload.


  • Update the tool
    Raja Mohamed | listopada 23, 2022

    Awesome tool!  But, ThreadModeler has only 2 standard types of thread (1. BSW Template and 2. ISO Template).  

    What about other standard threads?

    Please update the tool.


  • Works with tweakings
    Alejandro Sanchiz Torres | sierpnia 05, 2022 Sprawdzone pobranie (Co to jest?)

    Working on Inventor 2021 with tweakings. Look for Brian Bobbit on YouTube.

    Is there any way to add new threads like normal threads.xls? I want to model PG threads.

    Symon Gaskell | września 15, 2022

    It did not work for me.


  • threadModeler ayuda
    carlos diaz | lipca 14, 2022 Sprawdzone pobranie (Co to jest?)

    Como instalar en inventor 2023 ????

    necesito saber como hecerlo 

     

    no me quiere funcionar 

    COOL ORANGE (Wydawca) | lipca 27, 2022

    Hi Carlos! Please try to use the online version of the theradModeler: http://www.threadmodeler.com/home This supports Inventor 2023. Saludos Markus

    Marcelo De Tomasi | sierpnia 01, 2022

    Carlos, ya no hacen mas la version para Inventor desktop. Podes is a la app on line y generarlo ahi. online version of the threadModeler: http://www.threadmodeler.com/home Saludos, Marcelo

    Donald Clack | października 06, 2022

    The online version is not working... I am trying to use the solution posted below where you open the coolOrange file in notepad and change the revision number. I do not see that file when I search my c:/drive. Anyone have any ideas?


  • Trapezoidal thread
    Konstantin Schmäh | lipca 14, 2022 Sprawdzone pobranie (Co to jest?)

    I nedd to make a trapezoidal thread the templates Iso is only work for a metric thread

    Can anyione help me please


  • How to fix threadModeler not show in add-in
    Thossaplon Pruksakasemsuk | czerwca 17, 2022 Sprawdzone pobranie (Co to jest?)

    1. Go C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents

    2. Find "coolOrange.ThreadModeler.Inventor.addin" open this file by use notepad

     

    3.Change number to be auto desk your version <SupportedSoftwareVersionGreaterThan>21 <SupportedSoftwareVersionLessThan>26

    2021 = GreaterThan>21 LessThan>26

    2022 = GreaterThan>22 LessThan>27

    2023 = GreaterThan>23 LessThan>28

    GreaterThan> = your version

    LessThan> = your version + 5

    Fawzi Harami | października 17, 2022

    Thank you

    Ererw Erwerw | listopada 02, 2022

    Thanks for clearing it up, it's working

    Shane LaMontagne | grudnia 22, 2022

    Thank you! You absolutely rock!

    René Niemeier | kwietnia 13, 2023

    Thanks alot! :*

    Adam Edin | lipca 01, 2023

    What a legend, Thank you!

    Allard Franck | listopada 20, 2023

    Works with 2024 version as well. Thank you so much! I have been using this trick the last 3 versions.

    alexander böttcher | kwietnia 12, 2024

    still working! thx!

    Greg Bruce | maja 07, 2024

    You Sir are a legend! Still working as of May 2024 on the 2024 version. This does raise a very good question, why the heck is this not part of Inventor!?


  • threadModeler for Inventor 2023
    Katerine Alvarado | maja 25, 2022 Sprawdzone pobranie (Co to jest?)

    Hello, I would like to know if it is possible to install threadModeler in Inventor 2023, I was checking that there are people who have achieved it in version 2022, but the link they used is no longer available, I need your help, please.

    Milan Schwarz | czerwca 09, 2022

    Hi, there is way how to use this app with Inventor 2023. You can see advise on this site.... for 2023: GreaterThan>22.. LessThan>28..

    Toni Kuusilehto | czerwca 10, 2022

    Thanks Milan, I followed this procedure 1. c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\ folder. In Notepad, open the PackageContents.xml file and edit the string SeriesMax="Ir24" to SeriesMax="Ir26" 2. Now, in the Contents subfolder, open the coolOrange.ThreadModeler.Inventor.addin file in Notepad and edit GreaterThan>22.. LessThan>28 . Save the file again.


  • Not compatible with 2023 file
    Damien Fontaine | kwietnia 20, 2022 Sprawdzone pobranie (Co to jest?)

    Not compatible with 2023 file

    guancheng huang | czerwca 08, 2022

    So do I


  • I downloaded and installed for IV 2022... but it doesn't show up?
    Chris Fritsche | sierpnia 04, 2021 Sprawdzone pobranie (Co to jest?)

    I downloaded and installed it for IV 2022... but it doesn't show up in the add-ins? It shows up in the "App Manager" as "up to date"...

    剑军 邓 | sierpnia 11, 2021

    Search "Alicia Clark" in this page, you can find the solution. open this file "coolOrange.ThreadModeler.Inventor.addin" (I use the Visual Studio to open it), then change the vaules as Djmocontato Djmocontato says(20 to 22, 25 to 27), and save the file, then restart the inventor. Then follow the solution "Problem: The threadModeler panel is not visible in the coolOrange ribbon after installation" descripbed in https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846397450/Troubleshooting

    Lol Pablo | sierpnia 25, 2021

    Working in 2021 and 2022 FIX Folder ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents File: coolOrange.ThreadModeler.Inventor Change those 2 lines to 22 and 28 "SupportedSoftwareVersionGreaterThan 22 "SupportedSoftwareVersionLessThan 28


  • For Inventor 2022
    Djmocontato Djmocontato | lipca 16, 2021 Sprawdzone pobranie (Co to jest?)

    For Inventor 2022 I modified the coolOrange.ThreadModeler.Inventor file to 22 and 27. It worked.
    But I had to unlock as per this instruction. https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846397450/Troubleshooting

    Fawzi Harami | sierpnia 01, 2021

    IT IS ALIVE...IT IS ALIVE Thank you, finally it is working again.


  • Fusion
    Konrad Glura | lipca 02, 2021 Sprawdzone pobranie (Co to jest?)

    WORKS GREAT! THANK YOU


  • It's pretty good
    Emanuel Ciocan | maja 11, 2021 Sprawdzone pobranie (Co to jest?)

    Positives:

    - It works great

    - It looks great, though I don't know what impact it has on Inventor performance if used extensively throughout a project

    - Search other reviewers for how to modify C:Program Data to make it work in 2022 and it will run fine.

    Negatives that I see:

    - It doesn't play quite perfectly with Inventor. You may have issues with working with your part after using thread modeler (extruding, revolving, chamfering etc.).

    - Unfortunately it doesn't update if you modify dimensions. I just delete the revolutions and coil it created and start over. For parts you know won't be modified it's great.

    - If it locks up for some reason, there's no x button. You pretty much have to restart Inventor.

    Francisco Contreras | lipca 18, 2021

    como hago para que funcione en la versión 2022


  • Minor diameter is wrong
    Dickson Lin | kwietnia 20, 2021 Sprawdzone pobranie (Co to jest?)

    The Minor diameter created by software is wrong. It's small than standard. please check. 

    Dominic Chan | kwietnia 15, 2022

    Yes I concur. I've stopped using it now and started creating my own threads. Much more accurate.


  • thread molder doesn't show up on the tab for inventor 2020
    Liao Minbau | marca 05, 2021 Sprawdzone pobranie (Co to jest?)

    I am using Inventor 2020, this plugin doesn't show up on the tab after installation, but I found it has been installed on the inventor through the app manager? why is that?

    tri nguyen | marca 18, 2021
    Trusca Marius Marian | kwietnia 13, 2021

    i have the same problem, did someone solve that?

    COOL ORANGE (Wydawca) | lipca 02, 2021

    Maybe you need to unblock and activate the 'Load automatically' and 'Loaded' settings in the Add-In Manager. Please refer to the section "Problem: The threadModeler panel is not visible in the coolOrange ribbon after installation" of the FAQ (https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846397450/Troubleshooting).


  • Inventor 2021 ?
    Roman Glushenok | marca 01, 2021 Sprawdzone pobranie (Co to jest?)

    Really good and usefull plugin! Inventor 2021 please! :-)


  • Error in web conversor
    Francisco García Bayarri | lutego 25, 2021 Sprawdzone pobranie (Co to jest?)

    The cosmetic thread conversion from http://www.threadmodeler.com/home" target="_blank">http://www.threadmodeler.com/home does not work.


  • Online version - Nope, sorry.
    James Lovell | lutego 18, 2021 Sprawdzone pobranie (Co to jest?)

    2021 online version... no thanks! tried it once, got and error and not sure I want to be uploading my files to a random server (privacy issues) Unfortunate you have stopped developing it. :(


  • Update for version 2021
    Jordi Molero Fuertes | lutego 03, 2021 Sprawdzone pobranie (Co to jest?)

    Hello, thank you very much for the application. It works perfectly. In relation to the 2021 version of Inventor, how do you have it?

    Thank you,

    Jordi Molero

    COOL ORANGE (Wydawca) | lutego 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version: http://www.threadmodeler.com/home


  • does not work on 2021
    Alija Smajic | stycznia 19, 2021 Sprawdzone pobranie (Co to jest?)

    hi will it be any update so it works for 2021 inventor ?

    COOL ORANGE (Wydawca) | lutego 23, 2021

    There will be no update to Inventor 2021. For 2021 you can try this online version: http://www.threadmodeler.com/home


  • Отличное приложение!
    Alex Merzlaykov | grudnia 16, 2020 Sprawdzone pobranie (Co to jest?)

    Молодцы! Спасибо вам! Все работает 2021.


  • Update for Inventor 2021
    Q M | grudnia 09, 2020 Sprawdzone pobranie (Co to jest?)

    Perfect app.
    Use it a lot under inventor 2018 but now I'm under inventor 2021 and doesn't work...
    Can we hope a fast update for Inventor 2021 ?

    Best regards

    Reindert Alexander Bakker | stycznia 12, 2021

    There wont be an update to Inventor 2021, 2020 was the latest update. For 2021 you can try this website: (http://www.threadmodeler.com/home)


  • Update ???
    T Eric | grudnia 07, 2020 Sprawdzone pobranie (Co to jest?)

    this application "saves" inventory which is obsolete because of the lack of this functionality in native as on fusion! However, currently impossible to install it on inventor 2021! when will you update please?


  • Just what I was looking for
    Thomas Comita | października 03, 2020 Sprawdzone pobranie (Co to jest?)

    This feathur is long overdue in Inventor, SoldWorks has had it now for years.

    I would like Autodesk to put thread cutting option into the Hole command, label the options:  SHADED THREAD, MODELED THREAD.

    COOL ORANGE (Wydawca) | listopada 18, 2020

    You also can try the online version: http://www.threadmodeler.com/home


  • Version 19.0.8, 5/26/2020
    Darrell Kemp | września 23, 2020 Sprawdzone pobranie (Co to jest?)

    I contacted CoolOrange regarding backwards compatability of the latest version as it did not work on my installation of Inventor 2013. Manuel got back to me with a possible workaround, which I tried and after a bit of fiddling I've managed to get it working. For more info go and have a look at https://coolorange.atlassian.net/wiki/spaces/THREAD/pages/846430210/FAQ+threadModeler.


  • The best Add-in Is Finally working
    Fawzi Harami | września 02, 2020 Sprawdzone pobranie (Co to jest?)

    Working Fine on 2021

    Daniel Dolrie Simanjuntak | kwietnia 20, 2021

    I cant, could you tell me how to install it?


  • threadMldeler
    w z | sierpnia 13, 2020 Sprawdzone pobranie (Co to jest?)

    Works perfectly in inventor 2021. Thank you!

    Stefan Königer | listopada 19, 2020

    How you made it? i read the last version is only for the 2020 IN


  • Does not Work with Tapered Thread
    Ron Dietel | sierpnia 06, 2020 Sprawdzone pobranie (Co to jest?)

    Be advised that the coolOrange App does not work with tapered thread (e.g., NPT thread). Regards.


  • 2021
    Alicia Clark | czerwca 21, 2020 Sprawdzone pobranie (Co to jest?)

    As others have said, to get it to work with 2021 simply navigate to this file:  open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan> (you can use notepad) and change the line <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>

    Restart the program and itll load in!

    Stuart Wood | czerwca 29, 2020

    Thankyou ! You are a life saver.

    Tor Re | lipca 28, 2020

    Works perfectly in inventor 2021. Thank you!

    Ahmad Asmandar | sierpnia 18, 2020

    you are the best thank you

    Heiko Schedletzky | sierpnia 25, 2020

    Funktioniert Danke

    Brian Bischoff | września 21, 2020

    This worked for me! Thanks

    Owen Sullivan | października 15, 2020

    where do I find this at, is it in Inventor somewhere or on my PC?

    Vitaly Golovko | października 16, 2020

    Thank you!!!

    Robbie Johnson | października 20, 2020

    This info would have been useful to note: if you cannot see the c:\ProgramData folder, go to Control Panel, then Appearance & Personalization, then Folder Options. Click the "View" tab and make sure the bullet that says "Show Hidden Files & Folders" is selected. After you click Apply it will show up.

    Eshel Kedem | listopada 04, 2020

    Thanks a lot!!! I was so frustrated that it didn't work, but now the skies are sunny again ;-)

    Stefan Königer | listopada 19, 2020

    Super klappt perfekt vielen Dank

    Polina Shaposhnik | listopada 20, 2020

    Many thanks Alicia Clark. I couldn't have figured it out by myself. A small additional note: It might still not appear in the navigation panel, therefore one has to go to "Tools->Add-Ins" and manually change the default mark "Blocked" to "Load Automatically".

    Ariel Nemcovsky | listopada 29, 2020

    GENIUS, god and inventor bless you.

    Q M | grudnia 09, 2020

    Hi, Thank's for this help but don't work for me... Try with <SupportedSoftwareVersionGreaterThan>20..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan> And <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> But no change... Add-in available in Inventor but can't select the hole fonction...

    Jean Lapince | stycznia 07, 2021

    Thank you

    Alexandr Yevdokimov | marca 30, 2021

    Thank u man ! U Genius !

    Roman Krejčí | kwietnia 15, 2021

    Thank You !!

    Gonzalo Bastias | kwietnia 23, 2021

    Thanks a lot! This works even for the 2022 version by changing: <SupportedSoftwareVersionGreaterThan>22..</SupportedSoftwareVersionGreaterThan> <SupportedSoftwareVersionLessThan>27..</SupportedSoftwareVersionLessThan>

    Gilles Roures | maja 07, 2021

    Merci beaucoup!!! RG

    William Pietermans | maja 18, 2021

    WOW legend, thanks!

    Irina Petriv | czerwca 22, 2021

    It is actually work for 2022 after this small improvement - just don't forget to unblock it in Add-Ins and make/check a settings Load Automatically + Loaded ))))

    Piotr Jedrzejewski | sierpnia 11, 2021

    ZAJEBISCIE! THANK YOU!

    Joe Otero | grudnia 04, 2021

    wow man, thank you so much!!

    Ruth Perez | lipca 05, 2022

    Works perfectly in inventor 2021. Thank you!


  • We need Threadmodeler
    Luigi Monaco | czerwca 15, 2020 Sprawdzone pobranie (Co to jest?)

    Would Autodesk please put this peanuts coding in their official product. It saves a lot of time in 3D printing, we need this funkctionality. Does someone listen/ read, please confirm.

    Martijn Peters | sierpnia 10, 2020

    To my knowledge they have this functionality in Fusion 360, which is free to use for hobbyists.


  • Impossible to make a pinch with a decimal
    Pierre Adam | czerwca 06, 2020 Sprawdzone pobranie (Co to jest?)

    All the videos I've seen people can do thread pitch with a decimal. That simply does not work for me on inventor 2020...

    Does someone know how to do it ? Is there a configuration somewhere ?

    I basically can't do a M3x0.5 or M4x0.8. It just doesn't let me. Doesn't even offer an other pitch.

    If I try to go a M10x1.5, that pluging replace the 1.5mm pitch with a 1.0mm

    Thanks for your answers !

    pedro ramos | października 30, 2020

    Hello Pierre, Just having the same issue... Did you solved it?

    Pierre Adam | listopada 02, 2020

    Hello Pedro ! So ... I managed to get it work but I'm not 100% sure of the reason why. But I think the main reason is that I wasn't using the right template. I tried making a M3x0.5 and it worked while using the template C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\Thread Templates\BSW Template.ipt To be honest it's a bit of a shame that the plugin does not really utilize all the thread profiles that inventor utilize. Hope it will work for you !


  • Version 2021
    Gerald Leto | czerwca 04, 2020 Sprawdzone pobranie (Co to jest?)

    Honestly, I am not savvy at any of this, not a programmer, engineer and can barely use this software. That said, it worked for me in version 21 by making the following changes. 

      <SupportedSoftwareVersionGreaterThan>21..</SupportedSoftwareVersionGreaterThan>

      <SupportedSoftwareVersionLessThan>26..</SupportedSoftwareVersionLessThan>

    Sai Mallipedhi | czerwca 10, 2020

    Where did you make these changes?

    Kim Verwiel | czerwca 27, 2020

    worked for me to. had to change both 20 and 25 to 21 and 26. thanks. changes are made here . go to this file C:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents. then open ''coolOrange.ThreadModeler.Inventor.addin'' in notepad and change the numbers as stated above.


  • version 2021
    Victor Cherkasov | maja 24, 2020 Sprawdzone pobranie (Co to jest?)

    for 2021 open c:\ProgramData\Autodesk\ApplicationPlugins\coolOrange_threadModeler.bundle\Contents\coolOrange.ThreadModeler.Inventor.addin and edit <SupportedSoftwareVersionLessThan>

    Maxwell Richhart | czerwca 01, 2020

    I see: <SupportedSoftwareVersionLessThan>25..</SupportedSoftwareVersionLessThan> What do I change the value to for 2021? Thank you!

    Eric Willard | czerwca 02, 2020

    is there a way to make this work with 2021?


  • How do I get it to work in 2021?
    Jeffrey Chapman | maja 18, 2020 Sprawdzone pobranie (Co to jest?)

    How do I get it to work in 2021?  I gave it a 5 since I know you will solve this problem ;)


  • Update
    Lucas Abate | maja 17, 2020 Sprawdzone pobranie (Co to jest?)

    2021 version would be great.

    COOL ORANGE (Wydawca) | maja 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Update needed for Inventor 2021
    Raj Ramoutar | maja 01, 2020 Sprawdzone pobranie (Co to jest?)

    Can you guys get this working with Inventor 2021 please.Thanks.

    Sarskisiuzk Ctlechops | maja 16, 2020

    +1

    Victor Cherkasov | maja 24, 2020

    edit file "coolOrange.ThreadModeler.Inventor.addin" <SupportedSoftwareVersionLessThan>

    COOL ORANGE (Wydawca) | maja 26, 2020

    coolOrange will not further develop the app or provide new versions for newer Inventor versions. You can find the source code for the threadModeler on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-thread-modeler


  • Best Add On for Inventor ( for me anyway )
    Stuart Wood | kwietnia 29, 2020 Sprawdzone pobranie (Co to jest?)

    Thread Modeller is a fantastic app, which makes adding realism to my models ( for my client to see ) so much easier. But when is the 2021 version arriving ?


  • Best
    Stéphane AGEA | kwietnia 20, 2020 Sprawdzone pobranie (Co to jest?)

    Very Best plugin

    ThreadModeler no longer works on Inventor 2021, is it possible to have an upgrade?

    Thank's


  • Best
    Barbanel Michael | kwietnia 09, 2020 Sprawdzone pobranie (Co to jest?)

    Thanks a very useful addition. Please make support 2021

    Jjgolff Jjgolff | kwietnia 16, 2020

    Pasame tu correo electronico.


  • Só funciona em roscas feitas com o comando 'Rosca' em cilindros e furos, não funciona em roscas feito com o comando 'Furo'
    Airton Dos Santos Lima | kwietnia 01, 2020

    Muito bom o app mas é preciso corrigir este problema.


  • Should Be A Standard Plug-In
    Joseph Bongiorno | stycznia 21, 2020 Sprawdzone pobranie (Co to jest?)

    Works great and is easy to use. However, I would like to see additonal templates added besides ISO and BSW. I use this feature primairly to display threads on my stl files for 3D printing instead of manually making my threads. Definitley a time saver.


  • hen nb!
    | listopada 19, 2019 Sprawdzone pobranie (Co to jest?)

    you juxing luowen gongju jiu geng hao le ( ̄▽ ̄)"


  • Works good
    Georgi Kalchev | września 04, 2019 Sprawdzone pobranie (Co to jest?)

    It's very nice program. Works great with metric profile but I needed to make ISO trapezoidal tread and didn't recognise it.


  • OTTIMO
    M P | maja 22, 2019 Sprawdzone pobranie (Co to jest?)

    Con Inventor 2019 lavora molto bene ottimo


  • not sufficient for 3d Printing
    Nathan Villines | kwietnia 15, 2019 Sprawdzone pobranie (Co to jest?)

    Tried using this to easily 3D print something with male and female threads. Their modeler doesn't have any tolerance for male to female and did not work. 

    Joshua Yates | grudnia 04, 2019

    This does work but you have to add in your own clearance, allow 0.3mm or more depending on your printer. For example if your external thread is on a shaft of 25mm, the internal hole for the thread diameter needs to begin at 25.3mm, then use the thread feature and the coolorange tool which would will a gap of 0.15mm all the way around. increase the gap until it works with your printer.


  • Inventor 2019.3
    Karel Cedivoda | marca 07, 2019 Sprawdzone pobranie (Co to jest?)

    Today I tried it in Inventor 2019. It function. For interior thread it is necessary to make the hole and thread have you make extra.

    Nice :)


  • Не для Чертежей
    Дмитро Паденко | stycznia 11, 2019 Sprawdzone pobranie (Co to jest?)

    Добрый день! Эта надстройка для тех, кто занимается графикой,  или на рендеринг конечной модели...для разработки КД не годится, не отображает в чертеже резьбу, а так штука интересная.


  • Good but could be so much better
    Kirk Arthur | grudnia 05, 2018 Sprawdzone pobranie (Co to jest?)

    Thanks for this useful app.... To bad Inventor does not give us the option to model the threads like Fusion360.  A few things could make it better, like... make it associative so that if I later change the thread size in the hole, the modeled thread feature also updates. Also, don't add the coil feature to a seperate solid.

    For those that want ANSI (UNF AND UNC) just use the ISO template.  It will give the correct thread model.


  • Awesome, but better if UNC, UNF thread included
    Zhifei Deng | listopada 12, 2018 Sprawdzone pobranie (Co to jest?)

    At titled


  • Support of tapped holes?
    Ko-Keng Chang | października 02, 2018 Sprawdzone pobranie (Co to jest?)

    Thank you for the useful tool.

    Is it popssible to turn tapped holes into modeled thread?


  • Very good, needs additional threads.
    Tony Macias | sierpnia 20, 2018 Sprawdzone pobranie (Co to jest?)

    It would be great if UNC, UNF, and NPT thread forms were supported. This is the one improvement I can think of making.


  • Awesome...
    Sebastien Bolle | czerwca 30, 2018 Sprawdzone pobranie (Co to jest?)

    Except there is no support for ACME threads. I would love to see that added in a future release.


  • Muy bueno.
    Sebastian Lopez Rubio | maja 30, 2018 Sprawdzone pobranie (Co to jest?)

    Perfecto y fácil de usar


  • Wow this is amazing.
    Isaacrbeam Isaacrbeam | maja 18, 2018 Sprawdzone pobranie (Co to jest?)

    Very simple to use and amazing tool. Thanks for the development. Keep up the good work.


  • Maravilloso
    Danaes Arcos | kwietnia 23, 2018 Sprawdzone pobranie (Co to jest?)

    Fácil de intslar y aplicar, Genial¡¡¡


  • Wonderful
    Jzhu | marca 14, 2018 Sprawdzone pobranie (Co to jest?)

    Thanks alot


  • Super
    Josef Novák | marca 12, 2018 Sprawdzone pobranie (Co to jest?)

    Perfektní appka :) .... Perfect app. THANK YOU very much :)


  • Exactly what I wanted from Inventor.
    Perrin Zahn | stycznia 21, 2018 Sprawdzone pobranie (Co to jest?)

    Amazing. The app is small, making it easy to download just about anywhere, the installation takes seconds, and the thread-converting process is intuitive and easy to do. I literally can't think of anything else I'd want from this add-on.


  • Great tool!
    Lars van der Wal | stycznia 07, 2018 Sprawdzone pobranie (Co to jest?)

    Use it for 3D printing. Thanks :-)


  • worked for small threads
    Fra | grudnia 06, 2017 Sprawdzone pobranie (Co to jest?)

    It actually worked great for a 3/8" nc thread, but did not work for a 7/16" nc thread.


  • good
    Ricardo Aleman | listopada 27, 2017 Sprawdzone pobranie (Co to jest?)

    good


  • Excellent Plug-in for 3d Prints
    Sotiris Katsikis | listopada 19, 2017 Sprawdzone pobranie (Co to jest?)

    This is an excellent plugin to enable 3D printing of threads.


  • Great for 3d printing
    Michael Berna | października 23, 2017 Sprawdzone pobranie (Co to jest?)

    I use this for converting the built in thread representations to 3d printable objects. This saves me a lot of time and ensures an accurate thread.


  • Perfect idea and very decent plug-in.
    晓晗 | października 13, 2017 Sprawdzone pobranie (Co to jest?)

    I like it and I support your plug-in and YouTube channel. By the way, I'm Chinese. LoL


  • Would be a nice app
    J. H. | października 03, 2017 Sprawdzone pobranie (Co to jest?)

    If you only use metric threads it would be a nice app, but threads for Pipes (Withworth) is not implemented yet. Even tough there is a template named BSW it is sketched with 60° not 55°. Of course this is changed fast, but I didn't get the thread with right inner dimension (for G3/4 around 23.7 instead of real-hole 24.5). So useless for 3D-Printing, only suitable for representation. Instead of lossing further time it's maybe better to generate his own ifeature... Good approach, would be nice to continiue to make it suitable for 3D-Printing even with pipe-threads or trapezoidal threads. Nevertheless, thanks for your work ;-)


  • Thread annotation
    Katarina Goreta | września 25, 2017 Sprawdzone pobranie (Co to jest?)

    how to annotate this thread in drawing for machine operator, I tried but wont let me to annotate!?


  • WOW! Works Great
    Murphy | sierpnia 17, 2017 Sprawdzone pobranie (Co to jest?)

    Click on the tool. Click on the tread file and boom! Saved me a lot of time instead of doing it manually.


  • 3d Printing
    Iain Mcmurray | sierpnia 16, 2017 Sprawdzone pobranie (Co to jest?)

    Amazing and simple to use. Perfect for setting up my models for 3d Printing when I need threads.


  • Perfect!!!
    Johann Hepp | sierpnia 10, 2017 Sprawdzone pobranie (Co to jest?)

    Works better than expected. Relieve the work. Thank you!


  • Great tool
    Brad Headlam | sierpnia 08, 2017 Sprawdzone pobranie (Co to jest?)

    Time saver if you need to fully model the thread. Only downside is creates large file size, but still great.


  • Works good, a few issues
    Frank Okipnak | sierpnia 04, 2017 Sprawdzone pobranie (Co to jest?)

    As everyone else is saying, great for the most part, just needs to be refined so can do more thread styles as well as holes properly. Otherwise, very handy and cool. The error I get the most is "Failed, try with a bigger pitch offset value", no matter what I try, does not work.


  • Super
    Sule Wad | sierpnia 01, 2017 Sprawdzone pobranie (Co to jest?)

    A great Tool


  • Hoze
    Jozsef Sallai | lipca 29, 2017 Sprawdzone pobranie (Co to jest?)

    Hi there, As others have already thanked I also want to do: Thank you guys!


  • easy app to use
    Julian Shepherd | lipca 13, 2017 Sprawdzone pobranie (Co to jest?)

    really easy to use great results .


  • Works good
    Vinck | czerwca 26, 2017 Sprawdzone pobranie (Co to jest?)

    It does what's supposeed to do. Nothing more. Nothing less.


  • Excelente!
    Luis Carlos Vega Renteria | czerwca 25, 2017 Sprawdzone pobranie (Co to jest?)

    Muy buena aplicacion! Yo te sugiero que hagas un pequeño tutorial de como hacer roscas para NPT ya que creo que nadie sabe como hacerlo. Gracias


  • good
    | czerwca 12, 2017 Sprawdzone pobranie (Co to jest?)

    it works very good,especially for 3D print.Thank you!


  • Straightforward and Effective
    Jonathan Bazak | czerwca 09, 2017 Sprawdzone pobranie (Co to jest?)

    Does exactly what I needed it to do: make matching 3d-printable threads on holes and surfaces with just a handful of clicks. Support for more non-standard ISO metric threads would be cool, but there are plenty here as-is. Very handy extension to have!


  • good
    Waiman Liu | czerwca 06, 2017 Sprawdzone pobranie (Co to jest?)

    very good. i can 3d print many gears now !!


  • Absolutely amazing
    Giacomo Brugnolo | maja 24, 2017 Sprawdzone pobranie (Co to jest?)

    Very useful for 3d printing and making your components look absolutely better!


  • Awesome
    Ricardo Fernandez Saavedra | maja 15, 2017 Sprawdzone pobranie (Co to jest?)

    Works perfectly! Thank you!


  • Can't be used with .idw callouts
    Douglas Reiland | maja 14, 2017 Sprawdzone pobranie (Co to jest?)

    The downloading and aesthetics of threadModeler are fine, but, unfortunately, this application is not compatible with .idw drawings. Inventor does not recognize the threadModeler modifications to the .ipt, therefore they cannot be called out with hole/thread specifications on drawings. I submitted this to coolOrange tech support. They acknowledged that this was a problem and acted as though this was the first time anyone raised this issue with them.


  • VERSION
    Daniel Gamarra | kwietnia 30, 2017 Sprawdzone pobranie (Co to jest?)

    I downloaded the plugin. The installation was successful but i can't see the app in the ribbon. Is it working in version 2018??


  • Worked perfect so far
    Simon Roth | kwietnia 27, 2017 Sprawdzone pobranie (Co to jest?)

    Had no problems with it, created perfect threads for 3d printing. Thank you


  • Very Useful
    Jordan Coquoz | kwietnia 18, 2017 Sprawdzone pobranie (Co to jest?)

    I don"t normally rate things but I wanted to give this five stars because of how amazingly useful this is. Huge thanks to the developers of this tool.


  • Cool so far
    Engineer Draft | kwietnia 12, 2017 Sprawdzone pobranie (Co to jest?)

    Have used it once where I wanted to really expose thread on a drawing, so that immediate clarification would happen. Worked well and was happy, good in context of time saving for those one off type jobs.


  • Works well for me
    Jonathan Colella | kwietnia 10, 2017 Sprawdzone pobranie (Co to jest?)

    No hassle, as advertised


  • Great app needs a few tweeks
    ROGER HOOKER | marca 29, 2017 Sprawdzone pobranie (Co to jest?)

    it's very responsive, however it's difficult to champher and seemingly impossible to extrude through.

    | czerwca 13, 2019

    did you get any solution for this?


  • Version 2020
    Rodolfo Ramos Castelo Branco | czerwca 18, 2015 Sprawdzone pobranie (Co to jest?)

    Good afternoon, for the 2020 version, is it already under development? Thank you

Przejdź do góry