Duct Pro

Digitally signed app



Duct Pro runs side by side with Autodesk® Inventor® and automates the creation of standard sheet metal duct components. It increases productivity by saving the designer time from manually creating sheet metal duct components and geometry by utilizing its intuitive graphical user interface.


Note: This app uses a custom installer (and not the standard App Store installer).

Описание пробной версии

The software will work for 15 days and then after that, the trial will be over. 

Сведения об этой версии

Версия 9.0.0, 04.04.2022
<9.0.0> - Inventor 2023 Compatibility - Added split circular flange model options <8.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - [New] Inventor 2022 Compatibility <7.0.2> *** No Activation required when upgrading from version 7.x.x *** - [Bug] Part Number assignment was fixed - Sub-components of all multipart Duct Pro models were given the same Part Number. <7.0.1> - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added

Скриншоты и видео

Рецензии клиентов

11 оценки
Техническая поддержка
  • Real Time Saver
    Darryn Mott | марта 28, 2022 Проверенная загрузка (Что это такое?)

    I am in the process of buying this program.  If you build heavier gauge sheet metal ductwork, this program is excellent. There is a mode to make the measurements in inches, but the rest of the parameters remain metric.  It will not use your custom sheet metal templates, if you have them but it is easy to change.  There is no eccentric round wye, but with some adjustment to the ref model and a larger rip-you are in business.

    Pieter van der Westhuizen (Разработчик) | марта 31, 2022

    Hi Darryn, Thanks for the feedback and great review. The setting to Inches or Metric is only used for when no units are specified in the text boxes. The app supports dual units and expressions so you could even enter "4in + 5mm" and it would work. As for the part requirement please email me directly and we can discuss what you would like to add. The email contact is in the app.

  • Almost
    Josh Gorham | октября 05, 2021 Проверенная загрузка (Что это такое?)

    Went looking for an alternative when the software I normally use was not available. Missing connection and seam options, if you use a pittsburg machine or need flanged connections forget it.

    Pieter van der Westhuizen (Разработчик) | октября 07, 2021

    Hi Josh, thanks for the review. Yes, Duct Pro is aimed more at the "heavy-gauge" steel ducting industry.

  • nice
    hassan sadiek | мая 20, 2021

    Amazing tool for inventor, how can I buy It? 

    Pieter van der Westhuizen (Разработчик) | мая 24, 2021

    Please email me: ivtools@mgfx.co.za

  • Great tool..
    Milan Kantaria | сентября 29, 2018 Проверенная загрузка (Что это такое?)

    Great tool..What is the price ? how can i buy it ?

  • This App for duct is way better than Revit.
    Steve Nguyen | сентября 28, 2018

    I have been using this app for 7 days to created custom duct work and it saves a lot of time.

    But I have some improvements for this app and also more connection for duct if you can add to the app then this is the best.

    1. this duct connection is plate but there are other like angle connection.

    2. Can you add on/off hole feature for flange

    3. have a tab for duct assembly start duct overall length then connection flange types like plate or angle and size. (this help the user not to build assy.) look at the Inventor Bolt connection feature for an idea.

    4. Custom file name with sequence number per company.

    5. file storage location. set file path or after place duct assembly pops up for location save.

    6. hardware connection if flange has a hole.

    7. general material setting to company template or styles.

    Keep up the good work.

    I am working with my company to approve 10 seats of this app.


    Pieter van der Westhuizen (Разработчик) | октября 02, 2018

    Hi thanks for the comment and suggestions. Please contact me via email to discuss further: ivtools@mgfx.co.za

  • Good
    Bogumił Wójcik | сентября 11, 2018 Проверенная загрузка (Что это такое?)

    :) very good app!!!

  • Wow how can I buy it?
    Enry Riporter | августа 27, 2018 Проверенная загрузка (Что это такое?)

    Amazing tool for inventor, how can I buy It? 

  • Time saver
    Ian Reed | июня 18, 2018 Проверенная загрузка (Что это такое?)

    Saved so much time doing square to round connections and flanges.  Easily saved a days work of work. 

    Pieter van der Westhuizen (Разработчик) | июня 21, 2018

    Thanks for the compliment and good rating!

  • excellent
    Nicolas Beyer | мая 11, 2017 Проверенная загрузка (Что это такое?)

    Impressionant et excellent plugin !

  • good
    christian choquehuanca yanqui | ноября 30, 2015


  • Time saving and amazing app
    Pascal David | ноября 04, 2015 Проверенная загрузка (Что это такое?)

    This app is one of my favorite. The things that you can do and the time saving makes it realy awsome.

    Pieter van der Westhuizen (Разработчик) | ноября 05, 2015

    Thanks for the kind words Pascal!