Duct Pro

Digitally signed app



Duct Pro runs side by side with Autodesk® Inventor® and automates the creation of standard sheet metal duct components. It increases productivity by saving the designer time from manually creating sheet metal duct components and geometry by utilizing its intuitive graphical user interface.


Note: This app uses a custom installer (and not the standard App Store installer).


The software will work for 15 days and then after that, the trial will be over. 


版本 10.0.0, 2023/4/11
10.0.0 https://micrographicssa-my.sharepoint.com/:u:/g/personal/pieter_mgfx_co_za/EZrUW4DgKNhPuITGyFCdyUcB6XQOPyUJtUDQLxFLJdEL7g?e=5vZCCE&download=1 What's New: <10.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to verify if your subscription is active*** - [New] Inventor 2024 Compatibility <9.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - [New] Inventor 2023 Compatibility - [Improved] More Circular Flange options added - 2-Piece and 4-Piece <8.0.1> *** No Activation required when upgrading from version 8.x.x *** - [New] Added an option to disable remembering the Destination subfolder setting on Project change. - [Bug] Fixed an issue in the Rectangular Cone model template. - [Bug] Fixed an issue where the Document Length units setting (inch or mm) was not changed for certain models. <8.0.0> *** Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active*** - [New] Inventor 2022 Compatibility



11 评论
  • Real Time Saver
    Darryn Mott | 三月 28, 2022 验证的下载 (这是什么?)

    I am in the process of buying this program.  If you build heavier gauge sheet metal ductwork, this program is excellent. There is a mode to make the measurements in inches, but the rest of the parameters remain metric.  It will not use your custom sheet metal templates, if you have them but it is easy to change.  There is no eccentric round wye, but with some adjustment to the ref model and a larger rip-you are in business.

    Pieter van der Westhuizen (发布者) | 三月 31, 2022

    Hi Darryn, Thanks for the feedback and great review. The setting to Inches or Metric is only used for when no units are specified in the text boxes. The app supports dual units and expressions so you could even enter "4in + 5mm" and it would work. As for the part requirement please email me directly and we can discuss what you would like to add. The email contact is in the app.

  • Almost
    Josh Gorham | 十月 05, 2021 验证的下载 (这是什么?)

    Went looking for an alternative when the software I normally use was not available. Missing connection and seam options, if you use a pittsburg machine or need flanged connections forget it.

    Pieter van der Westhuizen (发布者) | 十月 07, 2021

    Hi Josh, thanks for the review. Yes, Duct Pro is aimed more at the "heavy-gauge" steel ducting industry.

  • nice
    hassan sadiek | 五月 20, 2021

    Amazing tool for inventor, how can I buy It? 

    Pieter van der Westhuizen (发布者) | 五月 24, 2021

    Please email me: ivtools@mgfx.co.za

  • Great tool..
    Milan Kantaria | 九月 29, 2018 验证的下载 (这是什么?)

    Great tool..What is the price ? how can i buy it ?

  • This App for duct is way better than Revit.
    Steve Nguyen | 九月 28, 2018

    I have been using this app for 7 days to created custom duct work and it saves a lot of time.

    But I have some improvements for this app and also more connection for duct if you can add to the app then this is the best.

    1. this duct connection is plate but there are other like angle connection.

    2. Can you add on/off hole feature for flange

    3. have a tab for duct assembly start duct overall length then connection flange types like plate or angle and size. (this help the user not to build assy.) look at the Inventor Bolt connection feature for an idea.

    4. Custom file name with sequence number per company.

    5. file storage location. set file path or after place duct assembly pops up for location save.

    6. hardware connection if flange has a hole.

    7. general material setting to company template or styles.

    Keep up the good work.

    I am working with my company to approve 10 seats of this app.


    Pieter van der Westhuizen (发布者) | 十月 02, 2018

    Hi thanks for the comment and suggestions. Please contact me via email to discuss further: ivtools@mgfx.co.za

  • Good
    Bogumił Wójcik | 九月 11, 2018 验证的下载 (这是什么?)

    :) very good app!!!

  • Wow how can I buy it?
    Enry Riporter | 八月 27, 2018 验证的下载 (这是什么?)

    Amazing tool for inventor, how can I buy It? 

  • Time saver
    Ian Reed | 六月 18, 2018 验证的下载 (这是什么?)

    Saved so much time doing square to round connections and flanges.  Easily saved a days work of work. 

    Pieter van der Westhuizen (发布者) | 六月 21, 2018

    Thanks for the compliment and good rating!

  • excellent
    Nicolas Beyer | 五月 11, 2017 验证的下载 (这是什么?)

    Impressionant et excellent plugin !

  • good
    christian choquehuanca yanqui | 十一月 30, 2015


  • Time saving and amazing app
    Pascal David | 十一月 04, 2015 验证的下载 (这是什么?)

    This app is one of my favorite. The things that you can do and the time saving makes it realy awsome.

    Pieter van der Westhuizen (发布者) | 十一月 05, 2015

    Thanks for the kind words Pascal!