7cad Dynamic Block

7cad Dynamic Block

Digitally signed app

Versión de prueba gratuita de 30 días de duración, Pagado
SO:
Idioma:

Descripción

This app enables STRETCH command to stretch dynamic blocks when the crossing windows catch the dynamic parameter grips.

Supported parameters are: Point parameters, Polar parameters and Linear parameters.

For linear parameter, it is assumed horizontal. The app can't automatically detect its angle. Therefore, if the linear parameter is not horizontal, some manual setup should be taken in the BlockEditor (BEDIT command) as following:

 

+ If the linear parameter is rotated 60 degrees counterclockwise, its description should be "60".

+ If it is rotated 60 degrees clockwise, its description should be "-60".

 

Notes:

It is not supported if the linear parameter is rotated dynamically via another parameter's action.

The app does not work as expected if you have many chained action parameters.

In both above cases, a custom programming solution is required

Acerca de esta versión

Versión 1.0.0, 21/09/2021
Initial release.


Capturas de pantalla y vídeos


Reseñas de clientes

0 reseña
Obtener ayuda técnica
Ir arriba