ASME Pipes and Fittings Catalog – Metric.pcat
No components have been removed or added from the original.
No parametric body dimension units or data has been modified from the original.
This includes Component Dimension data, Flange Thickness data, Bolt Size data & Bolt Length data.
MODIFICATION DETAIL (Note there are exclusions listed below):
- Long Description Family embedded THICKNESS, WALL THICKNESS and LENGTH values in inches have been replaced with MM dimensions.
- Long Description Size embedded NOMINAL DIAMETER, THICKNESS, WALL THICKNESS and LENGTH values in inches have been replaced with mm values.
- Weight values (for all components) in LB have been replaced with KG values and units changed from LB to KG. This includes BOLTSET weights.
- 1/8” ND is mapped to 6mm ND; 1/8” THK is mapped to 3mm THK; 1/8” LG is mapped to 3mm LG
- 1/4” ND is mapped to 8mm ND; 1/4” THK is mapped to 6mm THK; 1/4” LG is mapped to 6mm LG
- 3/8” ND is mapped to 10mm ND; 3/8” THK is mapped to 8mm THK; 3/8” LG is mapped to 8mm LG
- 1/2” ND is mapped to 15mm ND; 1/2” THK is mapped to 12.5mm THK; 1/2” LG is mapped to 12.5mm LG
- All other ND, THK and LG imperial values have equivalent mapping metric values.
- BOLTSET SIZE embedded in Long Description Size remain in inch units
- BOLTSET SIZE and LENGTH data values remain in inch units
- FLANGE THICKNESS, FLANGE THICKNESS1 and FLANGE THICKNESS2 remain in inch units
- ALL component body dimensions remain in inch units.
Cadgroup can also provide Add-On content that complements this catalogue. A complete set of ASME Fittings, Flanges and Olets with Metric Descriptors and Weight data for each of the following Schedules and Ratings:
Schedules 5, 5S, 10, 10S, 20, 30, 40, 40S, 80, 80S, 120, 160, STD, XS, XXS
AS Ratings TABLE D, TABLE E, TABLE F, TABLE H, TABLE J.
Contact Cadgroup on firstname.lastname@example.org to acquire this content.
このバージョンについてバージョン 1.0, 2018/07/05
V1.0 Initial - release