Tag the second connector

Tag the second connector

BIM SOFT SOLUTIONS
月, 年

作業系統:
語言:

說明

This tool is designed to tag the second connector in the electrical fixtures or lighting fixtures which contain 2 electrical connectors. 

 

As known, you can create one circuit tag for the electrical fixtures or the lighting fixtures families but you can't tag the second connector if it exists.

 

This tool will do the following:

 

1. The tool will create a shared parameter called "Circuit_Number_2".It will be defined under the electrical fixtures category and the lighting fixtures category as instance and text parameter.

 

3. The tool will load the circuit tag family which is prepared to tag the second connector it called "Circuit_Number_2.rfa.

 

4. After running the tool the  "Circuit_Number_2" the parameter will be filled with data from the second connector.

 

5. You can easily tag the fixtures using the loaded tag "Circuit_Number_2.rfa.

閱讀說明文件

關於此版本

版本 1.0.0, 2020/7/8
Initial release.

發佈者隱私權政策

螢幕快照和視訊


客戶評論

(0 評論)

|

取得技術說明
移至頂端