Automatic Conduit

Automatic Conduit

BIM SOFT SOLUTIONS
年, 月

作業系統:
語言:

說明

The tool is designed to create power circuits and connect fixtures with conduits instead of Autodesk® Revit® default 2D wire. 

 

Work Flow:

1. Select the desired elements.

2. Click the Automatic Conduit command with circuiting.

3. Write the needed offset for the conduits.

4. Choose the connection method

a) Loop Conduits

b) None loop Conduits

5. Choose the home run direction and click ok

6. Select a panel for your circuit

 

For Video: https://www.youtube.com/watch?v=dwGkV8vgg6k

 

For Testing File: https://autode.sk/2TKh1PI

閱讀說明文件

關於此版本

版本 1.1.1, 2020/3/3
1. Adding the ability to select conduit size. 2. Fixing the bug which sometimes caused not placing the "Junction box over the fixture".

螢幕快照和視訊


客戶評論

(3 評論)

|

取得技術說明
  • Can it do just conduit connectors without circuiting?
    JOHN ARTIENDA | 二月 05, 2020

    Can it do just conduit connectors without circuiting?


  • looks good
    Jesse Browning | 一月 25, 2017

    The concept is good except it's not "real world". There is twice as much vertical conduit installed. Typically, the electrician will install a junction box over the fixture and supply a single vertical conduit to the single point connection most every light fixture has. If the program has this capability then it will match more e closely to the actual installation.


    BIM SOFT SOLUTIONS (發佈者) | 十二月 06, 2018

    I updated the tool as per your suggestion


  • good tool for modeling condiut
    Tawfik Alkady | 二月 25, 2016

    it is good tool for shop drawing which need to model condiut

移至頂端