7cad Dynamic Block

7cad Dynamic Block

Digitally signed app

Réglé, Version d'essai gratuite de 30 jours
Système d'exploitation:
Langue:

Description

This app enables STRETCH command to stretch dynamic blocks when the crossing windows catch the dynamic parameter grips.

Supported parameters are: Point parameters, Polar parameters and Linear parameters.

For linear parameter, it is assumed horizontal. The app can't automatically detect its angle. Therefore, if the linear parameter is not horizontal, some manual setup should be taken in the BlockEditor (BEDIT command) as following:

 

+ If the linear parameter is rotated 60 degrees counterclockwise, its description should be "60".

+ If it is rotated 60 degrees clockwise, its description should be "-60".

 

Notes:

It is not supported if the linear parameter is rotated dynamically via another parameter's action.

The app does not work as expected if you have many chained action parameters.

In both above cases, a custom programming solution is required

A propos de cette version

Version 1.1.0, 09/11/2021
Update the framework files.


Captures d'écran et vidéos


Avis des clients

0 avis
Obtenir une aide technique
Haut