Bevel Gear Maker (Basic)

Bevel Gear Maker (Basic)

Système d'exploitation:


The plugin creates bevel gears various set of parameters. Basic version creates shafts from 10 to 160 degrees. Parameters and description of functions are available in Guide.pdf. Information about invoices is available in Consulting Services section (please click More to expand the section).


Attached video shows how to use the plugin and set parameters.
Execution in most cases takes less than a half of minute on i7/8GB RAM/512GB SSD computer.


Plugin doesn't check interferences automatically and doesn't perform any analysis of prepared components. Please make sure that the necessary check is done before releasing this onto production. You must be aware that real dimensions of manufactured components may be different than in the design. Every material has different characteristics and its parameters may change during time depending on the kind of material, temperature and humidity of environment, workload, etc. Simplest motion analysis can be done by using joints and motion rules prepared by the plugin. Both involute and trochoid interferences can be checked by eyes but there’s better, dedicated built-in tool (TOOLS → Interference) available in Autodesk® Fusion 360™.

A propos de cette version

Version 3.3.0, 13/10/2022
Changed: * clearance factor now starts from 1/100, * option for creating drive in a new document has been removed. Fixed:

Captures d'écran et vidéos

Avis des clients

3 avis
Obtenir une aide technique
  • Great Tool
    Jesse Mills | avril 12, 2023 Téléchargement vérifié (Qu'est-ce que c'est?)

    Downloaded and made bevel gears within 5min. Saved me a lot of time. 

  • Very easy to use
    Juan Matte | avril 19, 2021 Téléchargement vérifié (Qu'est-ce que c'est?)

    After a few click you can create the perfect bevel gears. Highly recommended

  • Highly Recommended!
    Darryl Hammonds | janvier 05, 2021 Téléchargement vérifié (Qu'est-ce que c'est?)

    The last time that I had to make a bevel gear I had to use another CAD system because without an app like this it is impossible to draw a mathematically correct involute in Fusion 360. I also had to build a parameters table and painstakingly draw the proper tooth profiles using equation driven curves, and then import it into Fusion 360 so that I could output my g-code.  It took 2 days to design a mathematically correct gear. When I saw this app I took a chance and bought it.  Literally, 10 minutes later I had a set of gears that I can make in my Y-axis lathe. This is the best $20 I have spent in a long time, and I highly recommend it. A suggestion for a future update is to support diametrical pitch in addition to module. My initial design was for diametrical pitch but since this program only supports module I had to alter my design slightly.