Feature Recognition

Digitally signed app

Abonnement-App
Betriebssystem:
Sprache:

Beschreibung

The Feature Recognition application converts neutral 3D CAD models, such as STEP, SAT, or IGES solids, into full-featured Autodesk® Inventor® models.

 

Feature mapping could be executed automatically or interactively as needed to maintain design intent.

Informationen zu dieser Version

Version 1.0.13, 03.04.2024
1.0.13 Support Inventor 2025. 1.0.12 Fix an issue that hangs Inventor 2024. 1.0.11 Support Inventor 2024. 1.0.10 Support Inventor 2023. 1.0.9 Support Inventor 2022. 1.0.8 Support Inventor 2021. 1.0.7 Support Inventor 2020. 1.0.6 Support Inventor 2019. 1.0.5 Support Inventor 2018. 1.0.4 Support Inventor 2017. 1.0.3 Support Inventor 2016. 1.0.2 Enable the plugin for Inventor 2015. 1.0.1 Make the addin to be automatically loaded just after installing it. 1.0.0 Initial release.

Screenshots und Videos


Kundenbewertungen

34 Bewertungen
Technische Hilfe erhalten
  • 非常好
    林强 朱 | Juli 08, 2024

    谢谢


  • Can we merge the same features, such as holes of the same size and depth, into one feature?
    勤华 沈 | Juni 27, 2024

    Can we merge the same features, such as holes of the same size and depth, into one feature? If you identify four holes of the same size, you can identify four features. SW can identify the same holes and merge them into one feature


  • NO FUNCIONA
    William Hernandez | Mai 01, 2024

    EL RECONOCIMIENTO AUTOMATICO NO FUNCIONA EN LA VERSION 2024


  • Freezes
    Ibrahim Tavaci | Januar 04, 2024

    I am using Inventor 2024. Right clicking on base model and selecting feature recognition freezes the software

    Rocky Zhang (Herausgeber) | Februar 22, 2024

    A new version 1.0.12 is published to fix this issue, please download the new version to try.


  • Great tool when it works
    Mathieu Grenier | Dezember 06, 2023

    But more often thant not it just keeps loading forever on more complex parts


  • Not Working
    Shawn Weber | November 03, 2023

    I can not get this to work in 2024.1

    It just freezes up and does not load the tools to move forward


  • mohamed
    Mohamed Hassan | April 17, 2023

    thank you for this prog


  • Good but Crashes
    Colton Schroer | März 16, 2022

    This plugin works well on simple parts. I have found that on more complex components such as an on/off valve will not convert well. this seems to work well on more simple parts such as washers. Also, the program tends to crash a fair amount. After working with this for 1.5 hours, my program has crashed 3 times, one of which trying to work on a simple washer. I am using the latest update of Inventor as of 3/16/2022. If there are any suggestions or any help to provide, it would be much appreiciated.


  • Very Good
    Vas Mat | Juli 27, 2021

    But where the hack is 2022 Ver???

    It's not acceptable for Autodesk tolet us without it for so long.


  • Very Good
    John van de Ven | Juni 21, 2021

    Very usefull plugin. it should be standard in Inventor.

    1 little problem the version for Inventor 2022 isn't availible.

    Can anyone tell when it's comming?


  • Very Nice
    Craig Embry | Dezember 08, 2020

    I would love to see this for recognizing tapped holes. No luck on this yet.  Will keep trying, maybe a problem with original, not sure.


  • thanks
    Anh Viet Nguyen | Juli 26, 2019

    thank you


  • 特殊识别
    Zhang Chuhwa | April 07, 2018

    期待着能够支持INVENTOR2022,优秀的工具,未发布新版,都不愿意用新版INVENTOR.


  • Work well but could be better
    Alejandro Villalobos | Dezember 29, 2016

    It overrides coloring appearances to default. It would be great if not loose colors from imported geometry. I have some customers who works with color coding to identify operations and characteristics of models form machining such are threaded holes, allowances, and other machining operations.


  • Good
    Pongsawat Kanjungread | Oktober 13, 2016

    Good


  • good
    Hakan Kiziloz | September 01, 2016

    Thank you very much...


  • Does it's job perfectly
    Matthew Januszewski | Februar 25, 2016

    Best tool i've found for proxy backwards compatability between inventor generations


  • Ali
    Ali Farsinejad | Dezember 07, 2015

    I am a valid Subscription Customer I am not able to download this App . I signed in but upper right side is nothing to download . I log in to " Auto desk Subscription Center" , there are 7 apps available to download but not "Feature Recognition" , Please Help


  • Cannot be downloaded.
    Abdullah Hafiz | Dezember 07, 2015

    Me and IT department tried with the legal information -- required to download the app. Apparently, it is not downloadable as nothing is popping up. Could you please take the necessary steps with regards to that?


  • good
    hakan bayrak | September 02, 2015

    Thank you very much...


  • Still a so-so feature, but useful and needed.
    Niels Schotten | August 04, 2015

    It still has difficulties recognizing some extrudes and revolves. Especially in cylindrical features that have a slot cut through it (like a clevis cylinder rod end). The ability to create sketch to use to create a feature (extrude, revolve etc) would help. say to extrude a body to fill a space, but ends up as a cut-extrude in the model.


  • can't download...
    Yoni Sinvani | Juni 10, 2015

    I registered as a Subscription Customer and still can't find how to download this App. Help please!!!


  • No Download Option
    Robert Klewer | Mai 01, 2015

    Even though I am a valid Subscription Customer I am not able to download this App. Can somebody help?? I need the app really really urgently.


  • .
    dream gazer | März 19, 2015

    Thanks


  • wow..why I have been working without this app for so long?
    Thomas Thrush | März 03, 2015

    Fantastic...


  • Awesome
    DANIELE FOGLIAZZA | Dezember 21, 2014

    Is there this app for Inventor 2011??


  • Wonderful Plugin
    Bulent Kalaycioglu | Dezember 17, 2014

    This is a very useful plugin. It should be a part of the Inventor. Thanks a lot.


  • Time Saver
    Doug Hill | Juni 27, 2014 Geprüfter Download (Was ist das?)

    Awesome app! My only complaint with this is that I had an IDW file created for this part from the STP file. After I ran the feature recognition to update a couple dimensions on a couple features, all of my center lines and some dimensions were lost when I opened my IDW file back up. I was imagining that the feature recognition would automatically update my IDW file as well, without have to redo dimensions. Other than that, loved it.


  • Irreplaceable
    Zarko Grncarevski | Juni 20, 2014 Geprüfter Download (Was ist das?)

    Great, great feature. I started using it few years ago and now it is kind of a standard tool in my Inventor. I would like to see it as a standard tool of Inventor ribbon.


  • Fantastic
    Jason Murdoch | März 26, 2014 Geprüfter Download (Was ist das?)

    Love this app, so glad its back. It should be a part of the standard inventor install though.


  • Fantastic
    Jason Murdoch | März 26, 2014 Geprüfter Download (Was ist das?)

    Love this app, so glad its back. It should be a part of the standard inventor install though.


  • Awesome
    Erik Kurek | August 23, 2013 Geprüfter Download (Was ist das?)

    Thank you for providing it again. Don't realize how much you use it until it's gone. Don't take it away again. Especially since most of the parts I find online are STEP files or made by that other company's sub-standard software or Revit files for some odd reason.


  • Awesome
    Erik Kurek | August 23, 2013 Geprüfter Download (Was ist das?)

    Thank you for providing it again. Don't realize how much you use it until it's gone. Don't take it away again. Especially since most of the parts I find online are STEP files or made by that other company's sub-standard software or Revit files for some odd reason.


  • Very Good
    Anusak Phetcharoensuk | August 22, 2013 Geprüfter Download (Was ist das?)

    Thank you

    hhh hhh | Juli 06, 2024

    Thank you

Nach oben