Good app! But can you add sort list of drawing by revision number or custom iproperties. Thanks.

The program saves a lot of time. However that time saved is wasted when deleting the "_ [1]" extensions on the step files. It's getting really annoying especially when the whole project is exported and later on we need to change some things on a file, in that case the inventor exported file name differs from the drawing porter version and sadly Edgecam can't pair the mismatching file names to the CNC program.

The default step and pdf name should match the inventor .ipt name. Also there could be an option to set a different file naming default for others who don't use the inventor names.

Works very easy and good! The only thing i noticed is that it is quite slow in 2021, that should be improved.

It would be great if drawing porter could give you an option to add the revision to the drawing number such as -r1.

It works great and saved me a lot of time! 

It would be a big plus if it could convert to DXF format too!

Only prints to a4 cant see a size option for in the settings?

Thanks for this amazing app, it saves so much time compared to opening files and exporting.

One thing I'd like to see is 'find all' dwg/idw from a directory, including sub folders. We uses a lot of folders/subfolders to keep things organised, but can be tedious to enter each folder and add drawings manually. A one click button to add all found drawings under a directory path would be awesome.

Utilissima, ma ancora non c'è una alternativa se hai la 2021

Utilissima, ma ancora non c'è una alternativa se hai la 2021...

sarebbe proprio ciò che mi serve, ma ho la 2021 e quindi inutilizzabile...

지원은 언제부터 될까요???

i need to know when the 2021 support is published.

Using it to export pdf,dwg and step files.

Question: Is it possible to export assembly's also in step format? 

it was really easy to use for my purpose! But since im using Vault, its has some integration issues. But for me its ok. Only thing im missing is the possibility to drag and drop drawings? instead of searching the up. Possible to add that? 

I've just downloaded and used this for the first time and I have to say its a great little app. I'd like to see the addition of a prefix or suffix option based on iProperties i.e. adding in the drawing revision number as a suffix would be a big big plus for me. 

Good work and well worth using.

We have machines that consists of several hundred drawings. With this app I cannot go back to manually plotting pdf's.  Good app, easy to use. 

First of all great app! I would like just to add an advice, is it possible to update the drawing before to print/generate pdf and so on? Drawing porter at the moment print the dwg without cheking if the file is updated with the model, then can create some troubles...

Other reviewers have done a better job than i can. Suffice to say it's an awesome free app that does just what i need.

Also before you "Find All idw's" or the other thing make sure you do a Rebuild All on whatever assembly your using. Without doing this i have found it may grab older parts no longer associated with the assmbly. This is NOT a criticism lol.

FYI, i use it for creating a drawing pack in one pdf (combine pdfs). Myself and the project manager like being able to flip through all the drawings with one pdf.

This app really help me to produce drawing pack for my job

Drawing Porter is excellent for Inventor Drawings, would like to see the added ability to perform the same functions on AutoCAD Drawings. Have reached out to support a few times but emails keep getting returned as undeliverable so this is also an attempt to reach support.

Just saved 4 hours of my life

Very useful aplication, it should be a long time ago by default instaled in Inventor. thanks a lot.

Save a lot of time.

I have problem with export to dwg - hatch is not exported?!

Somebody else with same problem in Inventor 2019 Pro?  

Update: 05.2021

Please add an option to exclude drawings for "BOM reference parts" from export. 

It make a lots of problems.

We have a many subassemblyes which are only BOM"reference" in a given assembly. 

When seraching for drawings, Drawing Porter picks up also drawings for referenced parts, which are actually not needed in given assembly. 

 Drawing porter 2.13 /  Inventor 2021. 

Thanks in advance.

App works great and saves a lot of time. Two more options would be fantastic if they were integrated:

1. Export other file formats like PARASOLID *.X_T

2. map sheet sizes to various print paper sizes on different printers. Thanks for the great work!

Saves me for a lot of time

Hi, I would like to know whether it is possible to have all drawings to a single PDF document ?

This is by the most useful free I use for Inventor. This is perfect for exporting an assembly drawing or PDF pack to an external manufacturer.

One feature I would like if it wasn't much troublt to add would be to drag and drop files to open, instead of opening a seperate explorer window to navigate to the files you want to add.

Funktioniert einwandfrei und spart eine menge Zeit. Danke

Perfect time saver, but can only pick up drawings from C: so this results pratically useless for users that works with Vault, this options will be available in the future? Vey good work, anyway. 

It has really cut down the time spent printing. I am looking into the possibility of an adsk of rfa export option to cut down on our 3D model conersion. We are useing both revit and inventor and this would help quite a bit.

Time saver!

Aplikacja bardzo przyspiesza pracę.

I really love the fact that the App automatically picks up what page size and orientation the idw is even if you do different sizes and orientations at the same time. Dankie Pieter!

This batch app saves hours of my time. Developer, Thank you!!

I've just used this on a couple of top level assemblies and it worked flawlessly for printing out a folder of pdf's, ready for combining. My God, this is going to save me so much time - thank you very, very much for your time and effort !

Does exactly what it says it does! Thank you very much!

I love this app! When will Inventor 2018 be supported?

I used this app and I think it is very well builded. I think it as also a lot of potential that can be implemented. Good job!

Works great and after the top service this is also an time saver to keep :)

This program is great, some quirks i found with up-updated drawings, but that was a simple find/solve. Thank you, how can I support you?

The only problem for me low resolution icon :) It looks pixelated on darker backgrounds. I will create a svg version of your aps's icon and will convert it ico to replace shortcut's icon.

Hi I downloaded Drawing Porter today and it is a very good help for me but there are some things I wonder about. 1. When I write to PDF so will my IDW files closing in Inventor. Is there any setting? I open files from C: 2. Can I open files from the Vault with Drawing Porter I use Inventor/Vault 2017 Best Regards from Lennart

Hey there, when i was working on previous system (win7) it was working great, but now, on W10 it only showing error (cannot export to step/pdf/dwg). Do you have any idea why is that ?

As John Hygelund in 2014 wrote, I'm missing DXF export too. Most of my manufacturers can't read DWG files but DXF. In 2014 you put this on your list. Any idea when you can include it? Greets Burkhard

This is a great idea and concept and seems to work fairly well. Printing is my issue. Print and Export Options dialog box has no done button...cannot print 11x17 drawings even when Inventor settings are 11x17.

Is there a setting that will allow for all sheets in a multi sheet drawing to be exported?

Very nice and handy program. It does a lot, also closes your active Inventor session! It doesn't create .step files from assembly's. And doesn't give the .step file the right name if it's a derived/mirrored part.

We have had some issues with the app not finding existing drawings. This usually occurs for drawings that are fed by iParts/iAssemblies. Any idea why this is happening? Also, we would like the option to extract the part# from the idw and use it to name the printed copy. Any chance of that happening? Thanks for the all of the good work!

Great program. Has helped me on my projects when batch exporting all drawings to PDF. I suggest making the "log" of drawings created available as a text/excel file (or atleast possible to copy paste manually into one). This will ease the creation of project "drawing lists".

great app for free!

The add-in does exactly what it says it does. My only problem is that our file structure is not optimal for the way this add-in searches for files, and it takes upwards of 6 minutes to find 12 drawings (in a specific case)! Other than that, I love it.

Needed a way to batch plot (export) several hundred .idws to .pdf. Worked well for my purposes.

The only option missing on this is the ability to add a suffix or prefix to the file name on the PDFs.

This is almost exactly what I've been looking for. I was able to export both pdf and stp files from a large assembly, although not in the same export. I had to do 2d and 3d in a separate step. I also need to export .dxf rather than .dwg and .igs rather then .stp. Any change those options can be included?? Very nice app! Thank you.

Print to PDF works fine. But printing to DWG makes Inventor to crash. I'm using Inventor 2015 on Windows 7 win64.

Why doesn't this work for Inventor DWG's as well?

When using it on a assembly of about 30 parts, it takes ages gathering all the parts. And then it's still missing some referencing IDW, while they are on my harddrive. I'm using Vault.

Had trouble getting app to work, contacted customer support and within a day received a response from Pieter and a zip file which I unzipped and installed. App works Great now!! We batch print alot of assembly and detail drawings for the shop and this app drastically cuts the search time involved. With the export feature, I can save those drawing lists for later printing AND IT'S FREE!! Did I mention...IT"S FREE!!